diff mbox series

[v3,2/3] i2c: imx: Check for I2SR_IAL after every byte

Message ID 20201006105135.28985-3-ceggers@arri.de
State Accepted
Commit 1de67a3dee7a279ebe4d892b359fe3696938ec15
Headers show
Series i2c: imx: Fix handling of arbitration loss | expand

Commit Message

Christian Eggers Oct. 6, 2020, 10:51 a.m. UTC
Arbitration Lost (IAL) can happen after every single byte transfer. If
arbitration is lost, the I2C hardware will autonomously switch from
master mode to slave. If a transfer is not aborted in this state,
consecutive transfers will not be executed by the hardware and will
timeout.

Signed-off-by: Christian Eggers <ceggers@arri.de>
Cc: stable@vger.kernel.org
---
 drivers/i2c/busses/i2c-imx.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 745f4071155a..bf0e94814222 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -490,6 +490,16 @@  static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic)
 		dev_dbg(&i2c_imx->adapter.dev, "<%s> Timeout\n", __func__);
 		return -ETIMEDOUT;
 	}
+
+	/* check for arbitration lost */
+	if (i2c_imx->i2csr & I2SR_IAL) {
+		dev_dbg(&i2c_imx->adapter.dev, "<%s> Arbitration lost\n", __func__);
+		i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
+
+		i2c_imx->i2csr = 0;
+		return -EAGAIN;
+	}
+
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> TRX complete\n", __func__);
 	i2c_imx->i2csr = 0;
 	return 0;