diff mbox series

[v4,2/2] dt-bindings: input/touchscreen: add bindings for zinitix

Message ID 20200925192204.12631-2-michael.srba@seznam.cz
State New
Headers show
Series [v4,1/2] Input: add zinitix touchscreen driver | expand

Commit Message

Michael Srba Sept. 25, 2020, 7:22 p.m. UTC
From: Michael Srba <Michael.Srba@seznam.cz>

This patch adds dts bindings for the zinitix bt541 touchscreen.

Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 changes in v2: none
 changes in v3: document zinitix,mode property
 changes in v4: none


 .../bindings/input/touchscreen/zinitix.txt    | 40 +++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 2 files changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
new file mode 100644
index 000000000000..446efb9f5f55
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
@@ -0,0 +1,40 @@ 
+Device tree bindings for Zinitx BT541 touchscreen controller
+
+Required properties:
+
+ - compatible		: Should be "zinitix,bt541"
+ - reg			: I2C address of the chip. Should be 0x20
+ - interrupts		: Interrupt to which the chip is connected
+
+Optional properties:
+
+ - vdd-supply		: Analog power supply regulator on VCCA pin
+ - vddo-supply		: Digital power supply regulator on VDD pin
+ - zinitix,mode		: Mode of reporting touch points. Some modes may not work
+			  with a particular ts firmware for unknown reasons. Available
+			  modes are 1 and 2. Mode 2 is the default and preferred.
+
+The touchscreen-* properties are documented in touchscreen.txt in this
+directory.
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		bt541@20 {
+			compatible = "zinitix,bt541";
+			reg = <0x20>;
+			interrupt-parent = <&msmgpio>;
+			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&tsp_default>;
+			vdd-supply = <&reg_vdd_tsp>;
+			vddo-supply = <&pm8916_l6>;
+			touchscreen-size-x = <540>;
+			touchscreen-size-y = <960>;
+			zinitix,mode = <2>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 967e78c5ec0a..1b0b5e23267d 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1066,6 +1066,8 @@  patternProperties:
     description: Shenzhen Zidoo Technology Co., Ltd.
   "^zii,.*":
     description: Zodiac Inflight Innovations
+  "^zinitix,.*":
+    description: Zinitix Co., Ltd
   "^zte,.*":
     description: ZTE Corp.
   "^zyxel,.*":