diff mbox series

[02/29] arm: dts: keystone: Correct DWC USB3 compatible string

Message ID 20201020115959.2658-3-Sergey.Semin@baikalelectronics.ru
State Superseded
Headers show
Series dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name | expand

Commit Message

Serge Semin Oct. 20, 2020, 11:59 a.m. UTC
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix.
Use it instead of the deprecated "synopsys" one.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
 arch/arm/boot/dts/keystone-k2e.dtsi | 2 +-
 arch/arm/boot/dts/keystone.dtsi     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Oct. 20, 2020, 12:30 p.m. UTC | #1
On Tue, Oct 20, 2020 at 02:59:32PM +0300, Serge Semin wrote:
> Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix.

> Use it instead of the deprecated "synopsys" one.

> 

> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

> ---

>  arch/arm/boot/dts/keystone-k2e.dtsi | 2 +-

>  arch/arm/boot/dts/keystone.dtsi     | 2 +-

>  2 files changed, 2 insertions(+), 2 deletions(-)

> 


Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 2d94faf31fab..fa1b8499c5a7 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -79,7 +79,7 @@  keystone_usb1: usb@25000000 {
 			status = "disabled";
 
 			usb1: dwc3@25010000 {
-				compatible = "synopsys,dwc3";
+				compatible = "snps,dwc3";
 				reg = <0x25010000 0x70000>;
 				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
 				usb-phy = <&usb1_phy>, <&usb1_phy>;
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index c298675a29a5..8d046a1b690c 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -218,7 +218,7 @@  keystone_usb0: usb@2680000 {
 			status = "disabled";
 
 			usb0: dwc3@2690000 {
-				compatible = "synopsys,dwc3";
+				compatible = "snps,dwc3";
 				reg = <0x2690000 0x70000>;
 				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
 				usb-phy = <&usb_phy>, <&usb_phy>;