diff mbox series

[v3,2/5] usb: dwc3: host: Add suspend_quirk for dwc3 host

Message ID 1601376452-31839-3-git-send-email-sanm@codeaurora.org
State New
Headers show
Series USB DWC3 host wake up support from system suspend | expand

Commit Message

Sandeep Maheswaram Sept. 29, 2020, 10:47 a.m. UTC
Adding suspend quirk function for dwc3 host which will be called
during xhci suspend.
Setting hs_phy_flags, ss_phy_flags and phy mode during host suspend.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/host.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index e195176..7f316fa 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,6 +11,13 @@ 
 #include <linux/platform_device.h>
 
 #include "core.h"
+#include "../host/xhci.h"
+#include "../host/xhci-plat.h"
+int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd);
+
+static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
+	.suspend_quirk = xhci_dwc3_suspend_quirk,
+};
 
 static int dwc3_host_get_irq(struct dwc3 *dwc)
 {
@@ -115,6 +122,13 @@  int dwc3_host_init(struct dwc3 *dwc)
 		}
 	}
 
+	ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,
+			sizeof(struct xhci_plat_priv));
+	if (ret) {
+		dev_err(dwc->dev, "failed to add data to xHCI\n");
+		goto err;
+	}
+
 	ret = platform_device_add(xhci);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register xHCI device\n");
@@ -127,6 +141,41 @@  int dwc3_host_init(struct dwc3 *dwc)
 	return ret;
 }
 
+static void dwc3_set_phy_speed_flags(struct usb_hcd *hcd)
+{
+
+	int i, num_ports;
+	u32 reg;
+	struct device *dev = hcd->self.controller;
+	struct dwc3 *dwc = dev_get_drvdata(dev->parent);
+	struct xhci_hcd	*xhci_hcd = hcd_to_xhci(hcd);
+
+	dwc->hs_phy_flags = 0;
+
+	reg = readl(&xhci_hcd->cap_regs->hcs_params1);
+
+	num_ports = HCS_MAX_PORTS(reg);
+	for (i = 0; i < num_ports; i++) {
+		reg = readl(&xhci_hcd->op_regs->port_status_base + i * 0x04);
+		if (reg & PORT_PE) {
+			if (DEV_HIGHSPEED(reg) || DEV_FULLSPEED(reg))
+				dwc->hs_phy_flags |= PHY_MODE_USB_HOST_HS;
+			else if (DEV_LOWSPEED(reg))
+				dwc->hs_phy_flags |= PHY_MODE_USB_HOST_LS;
+			if (DEV_SUPERSPEED(reg))
+				dwc->ss_phy_flags |= PHY_MODE_USB_HOST_SS;
+		}
+	}
+	phy_set_mode(dwc->usb2_generic_phy, dwc->hs_phy_flags);
+	phy_set_mode(dwc->usb3_generic_phy, dwc->ss_phy_flags);
+}
+
+int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd)
+{
+	dwc3_set_phy_speed_flags(hcd);
+	return 0;
+}
+
 void dwc3_host_exit(struct dwc3 *dwc)
 {
 	platform_device_unregister(dwc->xhci);