diff mbox series

net: remove unneeded break

Message ID 20201019172607.31622-1-trix@redhat.com
State New
Headers show
Series net: remove unneeded break | expand

Commit Message

Tom Rix Oct. 19, 2020, 5:26 p.m. UTC 
From: Tom Rix <trix@redhat.com>

A break is not needed if it is preceded by a return or goto

Signed-off-by: Tom Rix <trix@redhat.com>
---
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c | 1 -
 drivers/net/ethernet/cisco/enic/enic_ethtool.c  | 1 -
 drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c   | 1 -
 drivers/net/wan/lmc/lmc_proto.c                 | 4 ----
 4 files changed, 7 deletions(-)

Comments

Jakub Kicinski Oct. 20, 2020, 5:34 p.m. UTC | #1 
On Mon, 19 Oct 2020 10:26:07 -0700 trix@redhat.com wrote:
> From: Tom Rix <trix@redhat.com>

> 

> A break is not needed if it is preceded by a return or goto

> 

> Signed-off-by: Tom Rix <trix@redhat.com>


Applied, thanks!
diff mbox series

Patch

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
index 0f865daeb36d..bf5e0e9bd0e2 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -1163,7 +1163,6 @@  int aq_nic_set_link_ksettings(struct aq_nic_s *self,
 		default:
 			err = -1;
 			goto err_exit;
-		break;
 		}
 		if (!(self->aq_nic_cfg.aq_hw_caps->link_speed_msk & rate)) {
 			err = -1;
diff --git a/drivers/net/ethernet/cisco/enic/enic_ethtool.c b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
index a4dd52bba2c3..1a9803f2073e 100644
--- a/drivers/net/ethernet/cisco/enic/enic_ethtool.c
+++ b/drivers/net/ethernet/cisco/enic/enic_ethtool.c
@@ -434,7 +434,6 @@  static int enic_grxclsrule(struct enic *enic, struct ethtool_rxnfc *cmd)
 		break;
 	default:
 		return -EINVAL;
-		break;
 	}
 
 	fsp->h_u.tcp_ip4_spec.ip4src = flow_get_u32_src(&n->keys);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index de563cfd294d..4b93ba149ec5 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -350,7 +350,6 @@  static s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
 		if (ixgbe_read_eerd_generic(hw, pointer, &length)) {
 			hw_dbg(hw, "EEPROM read failed\n");
 			return IXGBE_ERR_EEPROM;
-			break;
 		}
 
 		/* Skip pointer section if length is invalid. */
diff --git a/drivers/net/wan/lmc/lmc_proto.c b/drivers/net/wan/lmc/lmc_proto.c
index e8b0b902b424..4e9cc83b615a 100644
--- a/drivers/net/wan/lmc/lmc_proto.c
+++ b/drivers/net/wan/lmc/lmc_proto.c
@@ -89,17 +89,13 @@  __be16 lmc_proto_type(lmc_softc_t *sc, struct sk_buff *skb) /*FOLD00*/
     switch(sc->if_type){
     case LMC_PPP:
 	    return hdlc_type_trans(skb, sc->lmc_device);
-	    break;
     case LMC_NET:
         return htons(ETH_P_802_2);
-        break;
     case LMC_RAW: /* Packet type for skbuff kind of useless */
         return htons(ETH_P_802_2);
-        break;
     default:
         printk(KERN_WARNING "%s: No protocol set for this interface, assuming 802.2 (which is wrong!!)\n", sc->name);
         return htons(ETH_P_802_2);
-        break;
     }
 }