@@ -44,7 +44,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
/* make cpu1 to be turned off at next WFI command */
if (cpu == 1)
- __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION);
+ exynos_cpu_power_down(cpu);
/*
* here's the WFI
@@ -131,15 +131,12 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(phys_cpu);
- if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
- __raw_writel(S5P_CORE_LOCAL_PWR_EN,
- S5P_ARM_CORE1_CONFIGURATION);
-
+ if (!exynos_cpu_power_state(cpu)) {
+ exynos_cpu_power_up(cpu);
timeout = 10;
/* wait max 10 ms until cpu1 is on */
- while ((__raw_readl(S5P_ARM_CORE1_STATUS)
- & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+ while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) {
if (timeout-- == 0)
break;
@@ -111,9 +111,6 @@
#define EXYNOS_ARM_CORE_STATUS(_nr) \
(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
-#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
-#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
-
#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028)
#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108)
#define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128)