diff mbox

[v2,07/14] mmc: mmci: add ddrmode mask to variant data

Message ID 1400146628-30097-1-git-send-email-srinivas.kandagatla@linaro.org
State New
Headers show

Commit Message

Srinivas Kandagatla May 15, 2014, 9:37 a.m. UTC
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

This patch adds ddrmode mask to variant structure giving more flexibility
to the driver to support more SOCs which have different datactrl register
layout.

Without this patch datactrl register is updated with wrong ddrmode mask on non
ST SOCs, resulting in card detection failures.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 drivers/mmc/host/mmci.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

Comments

Linus Walleij May 23, 2014, 9:05 a.m. UTC | #1
On Thu, May 15, 2014 at 11:37 AM,  <srinivas.kandagatla@linaro.org> wrote:

> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
>
> This patch adds ddrmode mask to variant structure giving more flexibility
> to the driver to support more SOCs which have different datactrl register
> layout.
>
> Without this patch datactrl register is updated with wrong ddrmode mask on non
> ST SOCs, resulting in card detection failures.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
diff mbox

Patch

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 1385554..dec70d2 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -59,6 +59,7 @@  static unsigned int fmax = 515633;
  *		  is asserted (likewise for RX)
  * @sdio: variant supports SDIO
  * @st_clkdiv: true if using a ST-specific clock divider algorithm
+ * @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
  * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register
  * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl
  *		     register
@@ -76,6 +77,7 @@  struct variant_data {
 	unsigned int		datalength_bits;
 	unsigned int		fifosize;
 	unsigned int		fifohalfsize;
+	unsigned int		datactrl_mask_ddrmode;
 	bool			sdio;
 	bool			st_clkdiv;
 	bool			blksz_datactrl16;
@@ -114,6 +116,7 @@  static struct variant_data variant_u300 = {
 	.fifosize		= 16 * 4,
 	.fifohalfsize		= 8 * 4,
 	.clkreg_enable		= MCI_ST_U300_HWFCEN,
+	.datactrl_mask_ddrmode	= MCI_ST_DPSM_DDRMODE,
 	.datalength_bits	= 16,
 	.sdio			= true,
 	.pwrreg_powerup		= MCI_PWR_ON,
@@ -126,6 +129,7 @@  static struct variant_data variant_nomadik = {
 	.fifosize		= 16 * 4,
 	.fifohalfsize		= 8 * 4,
 	.clkreg			= MCI_CLK_ENABLE,
+	.datactrl_mask_ddrmode	= MCI_ST_DPSM_DDRMODE,
 	.datalength_bits	= 24,
 	.sdio			= true,
 	.st_clkdiv		= true,
@@ -140,6 +144,7 @@  static struct variant_data variant_ux500 = {
 	.fifohalfsize		= 8 * 4,
 	.clkreg			= MCI_CLK_ENABLE,
 	.clkreg_enable		= MCI_ST_UX500_HWFCEN,
+	.datactrl_mask_ddrmode	= MCI_ST_DPSM_DDRMODE,
 	.datalength_bits	= 24,
 	.sdio			= true,
 	.st_clkdiv		= true,
@@ -155,6 +160,7 @@  static struct variant_data variant_ux500v2 = {
 	.fifohalfsize		= 8 * 4,
 	.clkreg			= MCI_CLK_ENABLE,
 	.clkreg_enable		= MCI_ST_UX500_HWFCEN,
+	.datactrl_mask_ddrmode	= MCI_ST_DPSM_DDRMODE,
 	.datalength_bits	= 24,
 	.sdio			= true,
 	.st_clkdiv		= true,
@@ -800,7 +806,7 @@  static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 		}
 
 	if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50)
-		datactrl |= MCI_ST_DPSM_DDRMODE;
+		datactrl |= variant->datactrl_mask_ddrmode;
 
 	/*
 	 * Attempt to use DMA operation mode, if this