@@ -70,6 +70,11 @@ fi
: ${TREE_QEMU_UPSTREAM:=git://xenbits.xen.org/staging/qemu-upstream-${xenbranch#xen-}.git}
: ${LOCALREV_QEMU_UPSTREAM:=daily-cron.$branch}
+: ${TREE_QEMU_MAINLINE:=git://git.qemu.org/qemu.git}
+: ${BASE_TREE_QEMU_MAINLINE:=git://xenbits.xen.org/osstest/qemu.git}
+: ${PUSH_TREE_QEMU_MAINLINE:=$XENBITS:/home/xen/git/osstest/qemu.git}
+: ${LOCALREV_QEMU_MAINLINE:=daily-cron.$branch}
+
info_linux_tree () {
case $1 in
@@ -49,6 +49,10 @@ xen-4.*-testing)
repo_tree_rev_fetch_git xen \
$TREE_XEN staging-$branchcore $LOCALREV_XEN
;;
+qemu-mainline)
+ repo_tree_rev_fetch_git $branch \
+ $TREE_QEMU_MAINLINE master $LOCALREV_QEMU_UPSTREAM
+ ;;
qemu-upstream-*)
repo_tree_rev_fetch_git $branch \
$TREE_QEMU_UPSTREAM master $LOCALREV_QEMU_UPSTREAM
@@ -54,6 +54,10 @@ xen-4.*-testing)
repo_tree_rev_fetch_git xen \
$TREE_XEN stable-$branchcore $LOCALREV_XEN
;;
+qemu-mainline)
+ repo_tree_rev_fetch_git $branch \
+ $BASE_TREE_QEMU_MAINLINE mainline/xen-tested-master $LOCALREV_QEMU_MAINLINE
+ ;;
qemu-upstream-*)
repo_tree_rev_fetch_git $branch \
$BASE_TREE_QEMU_UPSTREAM master $LOCALREV_QEMU_UPSTREAM
@@ -34,6 +34,9 @@ case "$branch" in
xen*)
echo $TREE_XEN
;;
+qemu-mainline)
+ echo $TREE_QEMU_MAINLINE
+ ;;
qemu-upstream-*)
echo $TREE_QEMU_UPSTREAM
;;
@@ -30,6 +30,7 @@ select_xenbranch
. ap-common
TREE_LINUX=$PUSH_TREE_LINUX
+TREE_QEMU_MAINLINE=$PUSH_TREE_QEMU_MAINLINE
TREE_QEMU_UPSTREAM=$XENBITS:/home/xen/git/qemu-upstream-${xenbranch#xen-}.git
TREE_XEN=$PUSH_TREE_XEN
TREE_LIBVIRT=$PUSH_TREE_LIBVIRT
@@ -57,6 +58,10 @@ xen-*-testing)
xenversion=${xenversion#xen-}
git push $TREE_XEN $revision:stable-$xenversion
;;
+qemu-mainline)
+ cd $repos/qemu-mainline
+ git push $TREE_QEMU_MAINLINE $revision:refs/heads/mainline/xen-tested-master
+ ;;
qemu-upstream-*)
cd $repos/$branch
git push $TREE_QEMU_UPSTREAM $revision:master
@@ -111,8 +111,11 @@ if [ "x$REVISION_QEMU_UPSTREAM" = x ]; then
xen-3.*|xen-4.[01]-*)
;;
*)
- REVISION_QEMU_UPSTREAM="`fetch_version \
- qemu-upstream-${xenbranch#xen-}`"
+ if [ "x$qemuubranch" = "xqemu-mainline" ] ; then
+ TREE_QEMU_UPSTREAM=$TREE_QEMU_MAINLINE
+ export TREE_QEMU_UPSTREAM
+ fi
+ REVISION_QEMU_UPSTREAM="`fetch_version $qemuubranch`"
;;
esac
export REVISION_QEMU_UPSTREAM
@@ -166,7 +169,7 @@ osstest)
fi
;;
qemuu)
- realtree=qemu-upstream-${xenbranch#xen-}
+ realtree=$qemuubranch
NEW_REVISION=$REVISION_QEMU_UPSTREAM
;;
linuxfirmware)
@@ -31,7 +31,7 @@ scriptoptions="$1"; shift
LOGFILE=tmp/cr-for-branches.log
export LOGFILE
-: ${BRANCHES:=osstest xen-4.0-testing xen-4.1-testing xen-4.2-testing xen-4.3-testing xen-4.4-testing xen-unstable qemu-upstream-unstable qemu-upstream-4.2-testing qemu-upstream-4.3-testing qemu-upstream-4.4-testing linux-3.10 linux-3.4 linux-arm-xen ${EXTRA_BRANCHES}}
+: ${BRANCHES:=osstest xen-4.0-testing xen-4.1-testing xen-4.2-testing xen-4.3-testing xen-4.4-testing xen-unstable qemu-mainline qemu-upstream-unstable qemu-upstream-4.2-testing qemu-upstream-4.3-testing qemu-upstream-4.4-testing linux-3.10 linux-3.4 linux-arm-xen ${EXTRA_BRANCHES}}
export BRANCHES
fetchwlem=$wlem
@@ -43,6 +43,7 @@ repo_tree_rev_fetch_git () {
select_xenbranch () {
case "$branch" in
xen*) tree=xen; xenbranch=$branch ;;
+ qemu-mainline) tree=qemuu; xenbranch=xen-unstable qemuubranch=qemu-mainline;;
qemu-upstream-*) tree=qemuu; xenbranch=xen-${branch#qemu-upstream-};;
linux) tree=linux; xenbranch=xen-unstable ;;
linux-*) tree=linux; xenbranch=xen-unstable ;;
@@ -55,6 +56,9 @@ select_xenbranch () {
else
linuxbranch=''
fi
+ if [ x$qemuubranch = x ]; then
+ qemuubranch="qemu-upstream-${xenbranch#xen-}"
+ fi
}
select_branch () {
The naming here is slightly confused because we call our branches of qemuu on xenbits "qemu-upstream-foo", so I went with qemu-mainline to be distinct. I've introduced $qemuubranch along the lines of $xenbranch, it is normally set to qemu-upstream-{X.Y,unstable} but for the qemu-mainline flight it instead points to qemu-mainline. I've run up to the make-flight bit of cr-daily-branch and it differs only in the expected ways from a standard xen-unstable branch (i.e. uses xen.git#master and qemu.git#master). I did consider causing make-flight:job_create_test_filter_callback to omit any test which didn't use qemuu but I decided not to because it is used for PV qdisk backends too. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> --- v3: - Output tree is now osstest/qemu.git#mainline/xen-tested-master - ap-push to refs/heads/... - adjust crm-daily-branch to pick the correct TREE_QEMU_UPSTREAM when testing mainline. v2: - Finalised repo names on xenbits as /osstest/qemu-mainline.git (and removed associated changelog comment about not being sure) - Removed wanderings about qemu-upstream filtering from commit log too. --- ap-common | 5 +++++ ap-fetch-version | 4 ++++ ap-fetch-version-old | 4 ++++ ap-print-url | 3 +++ ap-push | 5 +++++ cr-daily-branch | 9 ++++++--- cr-for-branches | 2 +- cri-common | 4 ++++ 8 files changed, 32 insertions(+), 4 deletions(-)