@@ -33,7 +33,7 @@
* be lowered once it has been asserted.
*/
struct MAX111xState {
- SSISlave parent_obj;
+ SSIPeripheral parent_obj;
qemu_irq interrupt;
/* Values of inputs at system reset (settable by QOM property) */
@@ -2,11 +2,11 @@
/*
* In principle SSI is a point-point interface. As such the qemu
- * implementation has a single slave device on a "bus".
- * However it is fairly common for boards to have multiple slaves
+ * implementation has a single peripheral on a "bus".
+ * However it is fairly common for boards to have multiple peripherals
* connected to a single master, and select devices with an external
* chip select. This is implemented in qemu by having an explicit mux device.
- * It is assumed that master and slave are both using the same transfer
+ * It is assumed that master and peripheral are both using the same transfer
* width.
*/
@@ -18,9 +18,9 @@
typedef enum SSICSMode SSICSMode;
-#define TYPE_SSI_SLAVE "ssi-slave"
-OBJECT_DECLARE_TYPE(SSISlave, SSISlaveClass,
- SSI_SLAVE)
+#define TYPE_SSI_PERIPHERAL "ssi-peripheral"
+OBJECT_DECLARE_TYPE(SSIPeripheral, SSIPeripheralClass,
+ SSI_PERIPHERAL)
#define SSI_GPIO_CS "ssi-gpio-cs"
@@ -30,21 +30,21 @@ enum SSICSMode {
SSI_CS_HIGH,
};
-/* Slave devices. */
-struct SSISlaveClass {
+/* Peripherals. */
+struct SSIPeripheralClass {
DeviceClass parent_class;
- void (*realize)(SSISlave *dev, Error **errp);
+ void (*realize)(SSIPeripheral *dev, Error **errp);
/* if you have standard or no CS behaviour, just override transfer.
* This is called when the device cs is active (true by default).
*/
- uint32_t (*transfer)(SSISlave *dev, uint32_t val);
+ uint32_t (*transfer)(SSIPeripheral *dev, uint32_t val);
/* called when the CS line changes. Optional, devices only need to implement
* this if they have side effects associated with the cs line (beyond
* tristating the txrx lines).
*/
- int (*set_cs)(SSISlave *dev, bool select);
+ int (*set_cs)(SSIPeripheral *dev, bool select);
/* define whether or not CS exists and is active low/high */
SSICSMode cs_polarity;
@@ -53,30 +53,30 @@ struct SSISlaveClass {
* cs_polarity are unused if this is overwritten. Transfer_raw will
* always be called for the device for every txrx access to the parent bus
*/
- uint32_t (*transfer_raw)(SSISlave *dev, uint32_t val);
+ uint32_t (*transfer_raw)(SSIPeripheral *dev, uint32_t val);
};
-struct SSISlave {
+struct SSIPeripheral {
DeviceState parent_obj;
/* Chip select state */
bool cs;
};
-extern const VMStateDescription vmstate_ssi_slave;
+extern const VMStateDescription vmstate_ssi_peripheral;
-#define VMSTATE_SSI_SLAVE(_field, _state) { \
+#define VMSTATE_SSI_PERIPHERAL(_field, _state) { \
.name = (stringify(_field)), \
- .size = sizeof(SSISlave), \
- .vmsd = &vmstate_ssi_slave, \
+ .size = sizeof(SSIPeripheral), \
+ .vmsd = &vmstate_ssi_peripheral, \
.flags = VMS_STRUCT, \
- .offset = vmstate_offset_value(_state, _field, SSISlave), \
+ .offset = vmstate_offset_value(_state, _field, SSIPeripheral), \
}
-DeviceState *ssi_create_slave(SSIBus *bus, const char *name);
+DeviceState *ssi_create_peripheral(SSIBus *bus, const char *name);
/**
- * ssi_realize_and_unref: realize and unref an SSI slave device
- * @dev: SSI slave device to realize
+ * ssi_realize_and_unref: realize and unref an SSI peripheral
+ * @dev: SSI peripheral to realize
* @bus: SSI bus to put it on
* @errp: error pointer
*
@@ -87,10 +87,10 @@ DeviceState *ssi_create_slave(SSIBus *bus, const char *name);
* This function is useful if you have created @dev via qdev_new()
* (which takes a reference to the device it returns to you), so that
* you can set properties on it before realizing it. If you don't need
- * to set properties then ssi_create_slave() is probably better (as it
+ * to set properties then ssi_create_peripheral() is probably better (as it
* does the create, init and realize in one step).
*
- * If you are embedding the SSI slave into another QOM device and
+ * If you are embedding the SSI peripheral into another QOM device and
* initialized it via some variant on object_initialize_child() then
* do not use this function, because that family of functions arrange
* for the only reference to the child device to be held by the parent
@@ -578,7 +578,7 @@ static void spitz_keyboard_realize(DeviceState *dev, Error **errp)
OBJECT_DECLARE_SIMPLE_TYPE(SpitzLCDTG, SPITZ_LCDTG)
struct SpitzLCDTG {
- SSISlave ssidev;
+ SSIPeripheral ssidev;
uint32_t bl_intensity;
uint32_t bl_power;
};
@@ -612,7 +612,7 @@ static inline void spitz_bl_power(void *opaque, int line, int level)
spitz_bl_update(s);
}
-static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value)
+static uint32_t spitz_lcdtg_transfer(SSIPeripheral *dev, uint32_t value)
{
SpitzLCDTG *s = SPITZ_LCDTG(dev);
int addr;
@@ -641,7 +641,7 @@ static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value)
return 0;
}
-static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp)
+static void spitz_lcdtg_realize(SSIPeripheral *ssi, Error **errp)
{
SpitzLCDTG *s = SPITZ_LCDTG(ssi);
DeviceState *dev = DEVICE(s);
@@ -667,12 +667,12 @@ OBJECT_DECLARE_SIMPLE_TYPE(CorgiSSPState, CORGI_SSP)
/* "Demux" the signal based on current chipselect */
struct CorgiSSPState {
- SSISlave ssidev;
+ SSIPeripheral ssidev;
SSIBus *bus[3];
uint32_t enable[3];
};
-static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value)
+static uint32_t corgi_ssp_transfer(SSIPeripheral *dev, uint32_t value)
{
CorgiSSPState *s = CORGI_SSP(dev);
int i;
@@ -700,7 +700,7 @@ static void corgi_ssp_gpio_cs(void *opaque, int line, int level)
#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */
#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */
-static void corgi_ssp_realize(SSISlave *d, Error **errp)
+static void corgi_ssp_realize(SSIPeripheral *d, Error **errp)
{
DeviceState *dev = DEVICE(d);
CorgiSSPState *s = CORGI_SSP(d);
@@ -715,14 +715,14 @@ static void spitz_ssp_attach(SpitzMachineState *sms)
{
void *bus;
- sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1],
- TYPE_CORGI_SSP);
+ sms->mux = ssi_create_peripheral(sms->mpu->ssp[CORGI_SSP_PORT - 1],
+ TYPE_CORGI_SSP);
bus = qdev_get_child_bus(sms->mux, "ssi0");
- sms->lcdtg = ssi_create_slave(bus, TYPE_SPITZ_LCDTG);
+ sms->lcdtg = ssi_create_peripheral(bus, TYPE_SPITZ_LCDTG);
bus = qdev_get_child_bus(sms->mux, "ssi1");
- sms->ads7846 = ssi_create_slave(bus, "ads7846");
+ sms->ads7846 = ssi_create_peripheral(bus, "ads7846");
qdev_connect_gpio_out(sms->ads7846, 0,
qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT));
@@ -1204,7 +1204,7 @@ static const VMStateDescription vmstate_corgi_ssp_regs = {
.version_id = 2,
.minimum_version_id = 2,
.fields = (VMStateField[]) {
- VMSTATE_SSI_SLAVE(ssidev, CorgiSSPState),
+ VMSTATE_SSI_PERIPHERAL(ssidev, CorgiSSPState),
VMSTATE_UINT32_ARRAY(enable, CorgiSSPState, 3),
VMSTATE_END_OF_LIST(),
}
@@ -1213,7 +1213,7 @@ static const VMStateDescription vmstate_corgi_ssp_regs = {
static void corgi_ssp_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
k->realize = corgi_ssp_realize;
k->transfer = corgi_ssp_transfer;
@@ -1222,7 +1222,7 @@ static void corgi_ssp_class_init(ObjectClass *klass, void *data)
static const TypeInfo corgi_ssp_info = {
.name = TYPE_CORGI_SSP,
- .parent = TYPE_SSI_SLAVE,
+ .parent = TYPE_SSI_PERIPHERAL,
.instance_size = sizeof(CorgiSSPState),
.class_init = corgi_ssp_class_init,
};
@@ -1232,7 +1232,7 @@ static const VMStateDescription vmstate_spitz_lcdtg_regs = {
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
- VMSTATE_SSI_SLAVE(ssidev, SpitzLCDTG),
+ VMSTATE_SSI_PERIPHERAL(ssidev, SpitzLCDTG),
VMSTATE_UINT32(bl_intensity, SpitzLCDTG),
VMSTATE_UINT32(bl_power, SpitzLCDTG),
VMSTATE_END_OF_LIST(),
@@ -1242,7 +1242,7 @@ static const VMStateDescription vmstate_spitz_lcdtg_regs = {
static void spitz_lcdtg_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
k->realize = spitz_lcdtg_realize;
k->transfer = spitz_lcdtg_transfer;
@@ -1251,7 +1251,7 @@ static void spitz_lcdtg_class_init(ObjectClass *klass, void *data)
static const TypeInfo spitz_lcdtg_info = {
.name = TYPE_SPITZ_LCDTG,
- .parent = TYPE_SSI_SLAVE,
+ .parent = TYPE_SSI_PERIPHERAL,
.instance_size = sizeof(SpitzLCDTG),
.class_init = spitz_lcdtg_class_init,
};
@@ -1397,8 +1397,8 @@ static void stellaris_init(MachineState *ms, stellaris_board_info *board)
*/
bus = qdev_get_child_bus(dev, "ssi");
- sddev = ssi_create_slave(bus, "ssi-sd");
- ssddev = ssi_create_slave(bus, "ssd0323");
+ sddev = ssi_create_peripheral(bus, "ssi-sd");
+ ssddev = ssi_create_peripheral(bus, "ssd0323");
gpio_out[GPIO_D][0] = qemu_irq_split(
qdev_get_gpio_in_named(sddev, SSI_GPIO_CS, 0),
qdev_get_gpio_in_named(ssddev, SSI_GPIO_CS, 0));
@@ -158,13 +158,13 @@ static void tosa_gpio_setup(PXA2xxState *cpu,
qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_USB_IN));
}
-static uint32_t tosa_ssp_tansfer(SSISlave *dev, uint32_t value)
+static uint32_t tosa_ssp_tansfer(SSIPeripheral *dev, uint32_t value)
{
fprintf(stderr, "TG: %d %02x\n", value >> 5, value & 0x1f);
return 0;
}
-static void tosa_ssp_realize(SSISlave *dev, Error **errp)
+static void tosa_ssp_realize(SSIPeripheral *dev, Error **errp)
{
/* Nothing to do. */
}
@@ -235,7 +235,7 @@ static void tosa_tg_init(PXA2xxState *cpu)
{
I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
i2c_slave_create_simple(bus, TYPE_TOSA_DAC, DAC_BASE);
- ssi_create_slave(cpu->ssp[1], "tosa-ssp");
+ ssi_create_peripheral(cpu->ssp[1], "tosa-ssp");
}
@@ -302,7 +302,7 @@ static const TypeInfo tosa_dac_info = {
static void tosa_ssp_class_init(ObjectClass *klass, void *data)
{
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
k->realize = tosa_ssp_realize;
k->transfer = tosa_ssp_tansfer;
@@ -310,8 +310,8 @@ static void tosa_ssp_class_init(ObjectClass *klass, void *data)
static const TypeInfo tosa_ssp_info = {
.name = "tosa-ssp",
- .parent = TYPE_SSI_SLAVE,
- .instance_size = sizeof(SSISlave),
+ .parent = TYPE_SSI_PERIPHERAL,
+ .instance_size = sizeof(SSIPeripheral),
.class_init = tosa_ssp_class_init,
};
@@ -104,7 +104,7 @@ static struct arm_boot_info z2_binfo = {
#define Z2_GPIO_LCD_CS 88
struct ZipitLCD {
- SSISlave ssidev;
+ SSIPeripheral ssidev;
int32_t selected;
int32_t enabled;
uint8_t buf[3];
@@ -115,7 +115,7 @@ struct ZipitLCD {
#define TYPE_ZIPIT_LCD "zipit-lcd"
OBJECT_DECLARE_SIMPLE_TYPE(ZipitLCD, ZIPIT_LCD)
-static uint32_t zipit_lcd_transfer(SSISlave *dev, uint32_t value)
+static uint32_t zipit_lcd_transfer(SSIPeripheral *dev, uint32_t value)
{
ZipitLCD *z = ZIPIT_LCD(dev);
uint16_t val;
@@ -155,7 +155,7 @@ static void z2_lcd_cs(void *opaque, int line, int level)
z2_lcd->selected = !level;
}
-static void zipit_lcd_realize(SSISlave *dev, Error **errp)
+static void zipit_lcd_realize(SSIPeripheral *dev, Error **errp)
{
ZipitLCD *z = ZIPIT_LCD(dev);
z->selected = 0;
@@ -168,7 +168,7 @@ static VMStateDescription vmstate_zipit_lcd_state = {
.version_id = 2,
.minimum_version_id = 2,
.fields = (VMStateField[]) {
- VMSTATE_SSI_SLAVE(ssidev, ZipitLCD),
+ VMSTATE_SSI_PERIPHERAL(ssidev, ZipitLCD),
VMSTATE_INT32(selected, ZipitLCD),
VMSTATE_INT32(enabled, ZipitLCD),
VMSTATE_BUFFER(buf, ZipitLCD),
@@ -181,7 +181,7 @@ static VMStateDescription vmstate_zipit_lcd_state = {
static void zipit_lcd_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
k->realize = zipit_lcd_realize;
k->transfer = zipit_lcd_transfer;
@@ -190,7 +190,7 @@ static void zipit_lcd_class_init(ObjectClass *klass, void *data)
static const TypeInfo zipit_lcd_info = {
.name = TYPE_ZIPIT_LCD,
- .parent = TYPE_SSI_SLAVE,
+ .parent = TYPE_SSI_PERIPHERAL,
.instance_size = sizeof(ZipitLCD),
.class_init = zipit_lcd_class_init,
};
@@ -329,7 +329,7 @@ static void z2_init(MachineState *machine)
type_register_static(&zipit_lcd_info);
type_register_static(&aer915_info);
- z2_lcd = ssi_create_slave(mpu->ssp[1], TYPE_ZIPIT_LCD);
+ z2_lcd = ssi_create_peripheral(mpu->ssp[1], TYPE_ZIPIT_LCD);
bus = pxa2xx_i2c_bus(mpu->i2c[0]);
i2c_slave_create_simple(bus, TYPE_AER915, 0x55);
wm = DEVICE(i2c_slave_create_simple(bus, TYPE_WM8750, 0x1b));
@@ -416,7 +416,7 @@ typedef enum {
#define M25P80_INTERNAL_DATA_BUFFER_SZ 16
struct Flash {
- SSISlave parent_obj;
+ SSIPeripheral parent_obj;
BlockBackend *blk;
@@ -458,7 +458,7 @@ struct Flash {
};
struct M25P80Class {
- SSISlaveClass parent_class;
+ SSIPeripheralClass parent_class;
FlashPartInfo *pi;
};
@@ -1170,7 +1170,7 @@ static void decode_new_cmd(Flash *s, uint32_t value)
}
}
-static int m25p80_cs(SSISlave *ss, bool select)
+static int m25p80_cs(SSIPeripheral *ss, bool select)
{
Flash *s = M25P80(ss);
@@ -1190,7 +1190,7 @@ static int m25p80_cs(SSISlave *ss, bool select)
return 0;
}
-static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx)
+static uint32_t m25p80_transfer8(SSIPeripheral *ss, uint32_t tx)
{
Flash *s = M25P80(ss);
uint32_t r = 0;
@@ -1265,7 +1265,7 @@ static uint32_t m25p80_transfer8(SSISlave *ss, uint32_t tx)
return r;
}
-static void m25p80_realize(SSISlave *ss, Error **errp)
+static void m25p80_realize(SSIPeripheral *ss, Error **errp)
{
Flash *s = M25P80(ss);
M25P80Class *mc = M25P80_GET_CLASS(s);
@@ -1386,7 +1386,7 @@ static const VMStateDescription vmstate_m25p80 = {
static void m25p80_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
M25P80Class *mc = M25P80_CLASS(klass);
k->realize = m25p80_realize;
@@ -1401,7 +1401,7 @@ static void m25p80_class_init(ObjectClass *klass, void *data)
static const TypeInfo m25p80_info = {
.name = TYPE_M25P80,
- .parent = TYPE_SSI_SLAVE,
+ .parent = TYPE_SSI_PERIPHERAL,
.instance_size = sizeof(Flash),
.class_size = sizeof(M25P80Class),
.abstract = true,
@@ -19,7 +19,7 @@
#include "qom/object.h"
struct ADS7846State {
- SSISlave ssidev;
+ SSIPeripheral ssidev;
qemu_irq interrupt;
int input[8];
@@ -63,7 +63,7 @@ static void ads7846_int_update(ADS7846State *s)
qemu_set_irq(s->interrupt, s->pressure == 0);
}
-static uint32_t ads7846_transfer(SSISlave *dev, uint32_t value)
+static uint32_t ads7846_transfer(SSIPeripheral *dev, uint32_t value)
{
ADS7846State *s = ADS7846(dev);
@@ -131,7 +131,7 @@ static const VMStateDescription vmstate_ads7846 = {
.minimum_version_id = 1,
.post_load = ads7856_post_load,
.fields = (VMStateField[]) {
- VMSTATE_SSI_SLAVE(ssidev, ADS7846State),
+ VMSTATE_SSI_PERIPHERAL(ssidev, ADS7846State),
VMSTATE_INT32_ARRAY(input, ADS7846State, 8),
VMSTATE_INT32(noise, ADS7846State),
VMSTATE_INT32(cycle, ADS7846State),
@@ -140,7 +140,7 @@ static const VMStateDescription vmstate_ads7846 = {
}
};
-static void ads7846_realize(SSISlave *d, Error **errp)
+static void ads7846_realize(SSIPeripheral *d, Error **errp)
{
DeviceState *dev = DEVICE(d);
ADS7846State *s = ADS7846(d);
@@ -163,7 +163,7 @@ static void ads7846_realize(SSISlave *d, Error **errp)
static void ads7846_class_init(ObjectClass *klass, void *data)
{
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
k->realize = ads7846_realize;
k->transfer = ads7846_transfer;
@@ -171,7 +171,7 @@ static void ads7846_class_init(ObjectClass *klass, void *data)
static const TypeInfo ads7846_info = {
.name = TYPE_ADS7846,
- .parent = TYPE_SSI_SLAVE,
+ .parent = TYPE_SSI_PERIPHERAL,
.instance_size = sizeof(ADS7846State),
.class_init = ads7846_class_init,
};
@@ -49,7 +49,7 @@ enum ssd0323_mode
};
struct ssd0323_state {
- SSISlave ssidev;
+ SSIPeripheral ssidev;
QemuConsole *con;
uint32_t cmd_len;
@@ -71,7 +71,7 @@ struct ssd0323_state {
OBJECT_DECLARE_SIMPLE_TYPE(ssd0323_state, SSD0323)
-static uint32_t ssd0323_transfer(SSISlave *dev, uint32_t data)
+static uint32_t ssd0323_transfer(SSIPeripheral *dev, uint32_t data)
{
ssd0323_state *s = SSD0323(dev);
@@ -338,7 +338,7 @@ static const VMStateDescription vmstate_ssd0323 = {
VMSTATE_INT32(remap, ssd0323_state),
VMSTATE_UINT32(mode, ssd0323_state),
VMSTATE_BUFFER(framebuffer, ssd0323_state),
- VMSTATE_SSI_SLAVE(ssidev, ssd0323_state),
+ VMSTATE_SSI_PERIPHERAL(ssidev, ssd0323_state),
VMSTATE_END_OF_LIST()
}
};
@@ -348,7 +348,7 @@ static const GraphicHwOps ssd0323_ops = {
.gfx_update = ssd0323_update_display,
};
-static void ssd0323_realize(SSISlave *d, Error **errp)
+static void ssd0323_realize(SSIPeripheral *d, Error **errp)
{
DeviceState *dev = DEVICE(d);
ssd0323_state *s = SSD0323(d);
@@ -364,7 +364,7 @@ static void ssd0323_realize(SSISlave *d, Error **errp)
static void ssd0323_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
k->realize = ssd0323_realize;
k->transfer = ssd0323_transfer;
@@ -374,7 +374,7 @@ static void ssd0323_class_init(ObjectClass *klass, void *data)
static const TypeInfo ssd0323_info = {
.name = TYPE_SSD0323,
- .parent = TYPE_SSI_SLAVE,
+ .parent = TYPE_SSI_PERIPHERAL,
.instance_size = sizeof(ssd0323_state),
.class_init = ssd0323_class_init,
};
@@ -85,7 +85,7 @@ static void max111x_write(MAX111xState *s, uint32_t value)
qemu_irq_raise(s->interrupt);
}
-static uint32_t max111x_transfer(SSISlave *dev, uint32_t value)
+static uint32_t max111x_transfer(SSIPeripheral *dev, uint32_t value)
{
MAX111xState *s = MAX_111X(dev);
max111x_write(s, value);
@@ -97,7 +97,7 @@ static const VMStateDescription vmstate_max111x = {
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
- VMSTATE_SSI_SLAVE(parent_obj, MAX111xState),
+ VMSTATE_SSI_PERIPHERAL(parent_obj, MAX111xState),
VMSTATE_UINT8(tb1, MAX111xState),
VMSTATE_UINT8(rb2, MAX111xState),
VMSTATE_UINT8(rb3, MAX111xState),
@@ -117,7 +117,7 @@ static void max111x_input_set(void *opaque, int line, int value)
s->input[line] = value;
}
-static int max111x_init(SSISlave *d, int inputs)
+static int max111x_init(SSIPeripheral *d, int inputs)
{
DeviceState *dev = DEVICE(d);
MAX111xState *s = MAX_111X(dev);
@@ -130,12 +130,12 @@ static int max111x_init(SSISlave *d, int inputs)
return 0;
}
-static void max1110_realize(SSISlave *dev, Error **errp)
+static void max1110_realize(SSIPeripheral *dev, Error **errp)
{
max111x_init(dev, 8);
}
-static void max1111_realize(SSISlave *dev, Error **errp)
+static void max1111_realize(SSIPeripheral *dev, Error **errp)
{
max111x_init(dev, 4);
}
@@ -179,7 +179,7 @@ static Property max1111_properties[] = {
static void max111x_class_init(ObjectClass *klass, void *data)
{
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
k->transfer = max111x_transfer;
@@ -189,7 +189,7 @@ static void max111x_class_init(ObjectClass *klass, void *data)
static const TypeInfo max111x_info = {
.name = TYPE_MAX_111X,
- .parent = TYPE_SSI_SLAVE,
+ .parent = TYPE_SSI_PERIPHERAL,
.instance_size = sizeof(MAX111xState),
.class_init = max111x_class_init,
.abstract = true,
@@ -197,7 +197,7 @@ static const TypeInfo max111x_info = {
static void max1110_class_init(ObjectClass *klass, void *data)
{
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
k->realize = max1110_realize;
@@ -212,7 +212,7 @@ static const TypeInfo max1110_info = {
static void max1111_class_init(ObjectClass *klass, void *data)
{
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
k->realize = max1111_realize;
@@ -42,7 +42,7 @@ typedef enum {
} ssi_sd_mode;
struct ssi_sd_state {
- SSISlave ssidev;
+ SSIPeripheral ssidev;
uint32_t mode;
int cmd;
uint8_t cmdarg[4];
@@ -73,7 +73,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(ssi_sd_state, SSI_SD)
#define SSI_SDR_ADDRESS_ERROR 0x2000
#define SSI_SDR_PARAMETER_ERROR 0x4000
-static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val)
+static uint32_t ssi_sd_transfer(SSIPeripheral *dev, uint32_t val)
{
ssi_sd_state *s = SSI_SD(dev);
@@ -235,12 +235,12 @@ static const VMStateDescription vmstate_ssi_sd = {
VMSTATE_INT32(arglen, ssi_sd_state),
VMSTATE_INT32(response_pos, ssi_sd_state),
VMSTATE_INT32(stopping, ssi_sd_state),
- VMSTATE_SSI_SLAVE(ssidev, ssi_sd_state),
+ VMSTATE_SSI_PERIPHERAL(ssidev, ssi_sd_state),
VMSTATE_END_OF_LIST()
}
};
-static void ssi_sd_realize(SSISlave *d, Error **errp)
+static void ssi_sd_realize(SSIPeripheral *d, Error **errp)
{
ERRP_GUARD();
ssi_sd_state *s = SSI_SD(d);
@@ -291,7 +291,7 @@ static void ssi_sd_reset(DeviceState *dev)
static void ssi_sd_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
- SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
k->realize = ssi_sd_realize;
k->transfer = ssi_sd_transfer;
@@ -304,7 +304,7 @@ static void ssi_sd_class_init(ObjectClass *klass, void *data)
static const TypeInfo ssi_sd_info = {
.name = TYPE_SSI_SD,
- .parent = TYPE_SSI_SLAVE,
+ .parent = TYPE_SSI_PERIPHERAL,
.instance_size = sizeof(ssi_sd_state),
.class_init = ssi_sd_class_init,
};
@@ -174,7 +174,7 @@ static void pl022_write(void *opaque, hwaddr offset,
s->cr1 = value;
if ((s->cr1 & (PL022_CR1_MS | PL022_CR1_SSE))
== (PL022_CR1_MS | PL022_CR1_SSE)) {
- BADF("SPI slave mode not implemented\n");
+ BADF("SPI peripheral mode not implemented\n");
}
pl022_xfer(s);
break;
@@ -34,11 +34,11 @@ static const TypeInfo ssi_bus_info = {
static void ssi_cs_default(void *opaque, int n, int level)
{
- SSISlave *s = SSI_SLAVE(opaque);
+ SSIPeripheral *s = SSI_PERIPHERAL(opaque);
bool cs = !!level;
assert(n == 0);
if (s->cs != cs) {
- SSISlaveClass *ssc = SSI_SLAVE_GET_CLASS(s);
+ SSIPeripheralClass *ssc = SSI_PERIPHERAL_GET_CLASS(s);
if (ssc->set_cs) {
ssc->set_cs(s, cs);
}
@@ -46,9 +46,9 @@ static void ssi_cs_default(void *opaque, int n, int level)
s->cs = cs;
}
-static uint32_t ssi_transfer_raw_default(SSISlave *dev, uint32_t val)
+static uint32_t ssi_transfer_raw_default(SSIPeripheral *dev, uint32_t val)
{
- SSISlaveClass *ssc = SSI_SLAVE_GET_CLASS(dev);
+ SSIPeripheralClass *ssc = SSI_PERIPHERAL_GET_CLASS(dev);
if ((dev->cs && ssc->cs_polarity == SSI_CS_HIGH) ||
(!dev->cs && ssc->cs_polarity == SSI_CS_LOW) ||
@@ -58,10 +58,10 @@ static uint32_t ssi_transfer_raw_default(SSISlave *dev, uint32_t val)
return 0;
}
-static void ssi_slave_realize(DeviceState *dev, Error **errp)
+static void ssi_peripheral_realize(DeviceState *dev, Error **errp)
{
- SSISlave *s = SSI_SLAVE(dev);
- SSISlaveClass *ssc = SSI_SLAVE_GET_CLASS(s);
+ SSIPeripheral *s = SSI_PERIPHERAL(dev);
+ SSIPeripheralClass *ssc = SSI_PERIPHERAL_GET_CLASS(s);
if (ssc->transfer_raw == ssi_transfer_raw_default &&
ssc->cs_polarity != SSI_CS_NONE) {
@@ -71,23 +71,23 @@ static void ssi_slave_realize(DeviceState *dev, Error **errp)
ssc->realize(s, errp);
}
-static void ssi_slave_class_init(ObjectClass *klass, void *data)
+static void ssi_peripheral_class_init(ObjectClass *klass, void *data)
{
- SSISlaveClass *ssc = SSI_SLAVE_CLASS(klass);
+ SSIPeripheralClass *ssc = SSI_PERIPHERAL_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
- dc->realize = ssi_slave_realize;
+ dc->realize = ssi_peripheral_realize;
dc->bus_type = TYPE_SSI_BUS;
if (!ssc->transfer_raw) {
ssc->transfer_raw = ssi_transfer_raw_default;
}
}
-static const TypeInfo ssi_slave_info = {
- .name = TYPE_SSI_SLAVE,
+static const TypeInfo ssi_peripheral_info = {
+ .name = TYPE_SSI_PERIPHERAL,
.parent = TYPE_DEVICE,
- .class_init = ssi_slave_class_init,
- .class_size = sizeof(SSISlaveClass),
+ .class_init = ssi_peripheral_class_init,
+ .class_size = sizeof(SSIPeripheralClass),
.abstract = true,
};
@@ -96,7 +96,7 @@ bool ssi_realize_and_unref(DeviceState *dev, SSIBus *bus, Error **errp)
return qdev_realize_and_unref(dev, &bus->parent_obj, errp);
}
-DeviceState *ssi_create_slave(SSIBus *bus, const char *name)
+DeviceState *ssi_create_peripheral(SSIBus *bus, const char *name)
{
DeviceState *dev = qdev_new(name);
@@ -115,32 +115,32 @@ uint32_t ssi_transfer(SSIBus *bus, uint32_t val)
{
BusState *b = BUS(bus);
BusChild *kid;
- SSISlaveClass *ssc;
+ SSIPeripheralClass *ssc;
uint32_t r = 0;
QTAILQ_FOREACH(kid, &b->children, sibling) {
- SSISlave *slave = SSI_SLAVE(kid->child);
- ssc = SSI_SLAVE_GET_CLASS(slave);
- r |= ssc->transfer_raw(slave, val);
+ SSIPeripheral *peripheral = SSI_PERIPHERAL(kid->child);
+ ssc = SSI_PERIPHERAL_GET_CLASS(peripheral);
+ r |= ssc->transfer_raw(peripheral, val);
}
return r;
}
-const VMStateDescription vmstate_ssi_slave = {
+const VMStateDescription vmstate_ssi_peripheral = {
.name = "SSISlave",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
- VMSTATE_BOOL(cs, SSISlave),
+ VMSTATE_BOOL(cs, SSIPeripheral),
VMSTATE_END_OF_LIST()
}
};
-static void ssi_slave_register_types(void)
+static void ssi_peripheral_register_types(void)
{
type_register_static(&ssi_bus_info);
- type_register_static(&ssi_slave_info);
+ type_register_static(&ssi_peripheral_info);
}
-type_init(ssi_slave_register_types)
+type_init(ssi_peripheral_register_types)
@@ -236,7 +236,8 @@ static void xilinx_spips_update_cs(XilinxSPIPS *s, int field)
if (old_state != new_state) {
s->cs_lines_state[i] = new_state;
s->rx_discard = ARRAY_FIELD_EX32(s->regs, CMND, RX_DISCARD);
- DB_PRINT_L(1, "%sselecting slave %d\n", new_state ? "" : "de", i);
+ DB_PRINT_L(1, "%sselecting peripheral %d\n",
+ new_state ? "" : "de", i);
}
qemu_set_irq(s->cs_lines[i], !new_state);
}
@@ -1154,7 +1155,7 @@ static void lqspi_load_cache(void *opaque, hwaddr addr)
int i;
int flash_addr = ((addr & ~(LQSPI_CACHE_SIZE - 1))
/ num_effective_busses(s));
- int slave = flash_addr >> LQSPI_ADDRESS_BITS;
+ int peripheral = flash_addr >> LQSPI_ADDRESS_BITS;
int cache_entry = 0;
uint32_t u_page_save = s->regs[R_LQSPI_STS] & ~LQSPI_CFG_U_PAGE;
@@ -1162,7 +1163,7 @@ static void lqspi_load_cache(void *opaque, hwaddr addr)
addr > q->lqspi_cached_addr + LQSPI_CACHE_SIZE - 4) {
xilinx_qspips_invalidate_mmio_ptr(q);
s->regs[R_LQSPI_STS] &= ~LQSPI_CFG_U_PAGE;
- s->regs[R_LQSPI_STS] |= slave ? LQSPI_CFG_U_PAGE : 0;
+ s->regs[R_LQSPI_STS] |= peripheral ? LQSPI_CFG_U_PAGE : 0;
DB_PRINT_L(0, "config reg status: %08x\n", s->regs[R_LQSPI_CFG]);
In order to use inclusive terminology, rename SSI 'slave' as 'peripheral', following the specification resolution: https://www.oshwa.org/a-resolution-to-redefine-spi-signal-names/ Patch created mechanically using: $ sed -i s/SSISlave/SSIPeripheral/ $(git grep -l SSISlave) $ sed -i s/SSI_SLAVE/SSI_PERIPHERAL/ $(git grep -l SSI_SLAVE) $ sed -i s/ssi-slave/ssi-peripheral/ $(git grep -l ssi-slave) $ sed -i s/ssi_slave/ssi_peripheral/ $(git grep -l ssi_slave) $ sed -i s/ssi_create_slave/ssi_create_peripheral/ \ $(git grep -l ssi_create_slave) Then in VMStateDescription vmstate_ssi_peripheral we restored the "SSISlave" migration stream name (to avoid breaking migration). Finally the following files have been manually tweaked: - hw/ssi/pl022.c - hw/ssi/xilinx_spips.c Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- include/hw/misc/max111x.h | 2 +- include/hw/ssi/ssi.h | 46 ++++++++++++++++++------------------- hw/arm/spitz.c | 32 +++++++++++++------------- hw/arm/stellaris.c | 4 ++-- hw/arm/tosa.c | 12 +++++----- hw/arm/z2.c | 14 ++++++------ hw/block/m25p80.c | 14 ++++++------ hw/display/ads7846.c | 12 +++++----- hw/display/ssd0323.c | 12 +++++----- hw/misc/max111x.c | 18 +++++++-------- hw/sd/ssi-sd.c | 12 +++++----- hw/ssi/pl022.c | 2 +- hw/ssi/ssi.c | 48 +++++++++++++++++++-------------------- hw/ssi/xilinx_spips.c | 7 +++--- 14 files changed, 118 insertions(+), 117 deletions(-)