diff mbox

[2/3] ARM: sti: stih416: Enable board LED support for B2020 RevE

Message ID 1400660415-14720-2-git-send-email-lee.jones@linaro.org
State New
Headers show

Commit Message

Lee Jones May 21, 2014, 8:20 a.m. UTC
There are two LEDs available on the B2020 RevE board, one red, one
green.  In this patch we enable the red one for "heartbeat" and turn
the green one off.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih416-b2020-revE.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
index 202919a..0a33739 100644
--- a/arch/arm/boot/dts/stih416-b2020-revE.dts
+++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
@@ -14,6 +14,20 @@ 
 	compatible = "st,stih416-b2020", "st,stih416";
 
 	soc {
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells		= <1>;
+				label			= "Front Panel LED";
+				gpios			= <&PIO4 1>;
+				linux,default-trigger	= "heartbeat";
+			};
+			green {
+				gpios			= <&PIO1 3>;
+				default-state 		= "off";
+			};
+		};
+
 		ethernet1: ethernet@fef08000 {
 			snps,reset-gpio = <&PIO0 7>;
 		};