| Message ID | b5b53bfe-35ac-3768-85bf-74d1290cf394@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [net] r8169: fix issue with forced threading in combination with shared interrupts | expand |
> As reported by Serge flag IRQF_NO_THREAD causes an error if the > interrupt is actually shared and the other driver(s) don't have this > flag set. This situation can occur if a PCI(e) legacy interrupt is > used in combination with forced threading. > There's no good way to deal with this properly, therefore we have to > remove flag IRQF_NO_THREAD. For fixing the original forced threading > issue switch to napi_schedule(). > > Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading") > Link: https://www.spinics.net/lists/netdev/msg694960.html > Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > --- Thanks, that works for me. Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru>
On Thu, 29 Oct 2020 14:37:35 +0300 Serge Belyshev wrote: > > As reported by Serge flag IRQF_NO_THREAD causes an error if the > > interrupt is actually shared and the other driver(s) don't have this > > flag set. This situation can occur if a PCI(e) legacy interrupt is > > used in combination with forced threading. > > There's no good way to deal with this properly, therefore we have to > > remove flag IRQF_NO_THREAD. For fixing the original forced threading > > issue switch to napi_schedule(). > > > > Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading") > > Link: https://www.spinics.net/lists/netdev/msg694960.html > > Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> > > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> > > Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Applied, thanks!
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 3b6ddc706..00f13805c 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -4573,7 +4573,7 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) } rtl_irq_disable(tp); - napi_schedule_irqoff(&tp->napi); + napi_schedule(&tp->napi); out: rtl_ack_events(tp, status); @@ -4746,7 +4746,7 @@ static int rtl_open(struct net_device *dev) rtl_request_firmware(tp); retval = request_irq(pci_irq_vector(pdev, 0), rtl8169_interrupt, - IRQF_NO_THREAD | IRQF_SHARED, dev->name, tp); + IRQF_SHARED, dev->name, tp); if (retval < 0) goto err_release_fw_2;
As reported by Serge flag IRQF_NO_THREAD causes an error if the interrupt is actually shared and the other driver(s) don't have this flag set. This situation can occur if a PCI(e) legacy interrupt is used in combination with forced threading. There's no good way to deal with this properly, therefore we have to remove flag IRQF_NO_THREAD. For fixing the original forced threading issue switch to napi_schedule(). Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading") Link: https://www.spinics.net/lists/netdev/msg694960.html Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/net/ethernet/realtek/r8169_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)