diff mbox series

[03/11] board/freescale: Remove P1025RDB board support

Message ID 20200921062645.21272-4-priyanka.jain@nxp.com
State New
Headers show
Series powerpc: Remove some platforms support | expand

Commit Message

Priyanka Jain Sept. 21, 2020, 6:26 a.m. UTC 
Remove NXP powerpc P1025RDB board support as it is no
longer maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>

---
 arch/powerpc/cpu/mpc85xx/Kconfig            |  9 ---
 board/freescale/p1_p2_rdb_pc/Kconfig        |  1 -
 board/freescale/p1_p2_rdb_pc/MAINTAINERS    |  5 --
 board/freescale/p1_p2_rdb_pc/README         |  1 -
 board/freescale/p1_p2_rdb_pc/ddr.c          |  3 +-
 board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 43 +----------
 configs/P1025RDB_36BIT_defconfig            | 65 -----------------
 configs/P1025RDB_NAND_defconfig             | 81 ---------------------
 configs/P1025RDB_SDCARD_defconfig           | 74 -------------------
 configs/P1025RDB_SPIFLASH_defconfig         | 77 --------------------
 configs/P1025RDB_defconfig                  | 63 ----------------
 include/configs/p1_p2_rdb_pc.h              | 51 -------------
 12 files changed, 4 insertions(+), 469 deletions(-)
 delete mode 100644 configs/P1025RDB_36BIT_defconfig
 delete mode 100644 configs/P1025RDB_NAND_defconfig
 delete mode 100644 configs/P1025RDB_SDCARD_defconfig
 delete mode 100644 configs/P1025RDB_SPIFLASH_defconfig
 delete mode 100644 configs/P1025RDB_defconfig

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 0707beebf8..eade333ef4 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -163,15 +163,6 @@  config TARGET_P1024RDB
 	imply CMD_SATA
 	imply PANIC_HANG
 
-config TARGET_P1025RDB
-	bool "Support P1025RDB"
-	select SUPPORT_SPL
-	select SUPPORT_TPL
-	select ARCH_P1025
-	imply CMD_EEPROM
-	imply CMD_SATA
-	imply SATA_SIL
-
 config TARGET_P2020RDB
 	bool "Support P2020RDB-PC"
 	select SUPPORT_SPL
diff --git a/board/freescale/p1_p2_rdb_pc/Kconfig b/board/freescale/p1_p2_rdb_pc/Kconfig
index 2f9640b67c..8797b41e2a 100644
--- a/board/freescale/p1_p2_rdb_pc/Kconfig
+++ b/board/freescale/p1_p2_rdb_pc/Kconfig
@@ -4,7 +4,6 @@  if TARGET_P1020MBG		|| \
 	TARGET_P1020UTM		|| \
 	TARGET_P1021RDB		|| \
 	TARGET_P1024RDB		|| \
-	TARGET_P1025RDB		|| \
 	TARGET_P2020RDB
 
 config SYS_BOARD
diff --git a/board/freescale/p1_p2_rdb_pc/MAINTAINERS b/board/freescale/p1_p2_rdb_pc/MAINTAINERS
index c2e924798e..b57af344c7 100644
--- a/board/freescale/p1_p2_rdb_pc/MAINTAINERS
+++ b/board/freescale/p1_p2_rdb_pc/MAINTAINERS
@@ -36,11 +36,6 @@  F:	configs/P1024RDB_36BIT_defconfig
 F:	configs/P1024RDB_NAND_defconfig
 F:	configs/P1024RDB_SDCARD_defconfig
 F:	configs/P1024RDB_SPIFLASH_defconfig
-F:	configs/P1025RDB_defconfig
-F:	configs/P1025RDB_36BIT_defconfig
-F:	configs/P1025RDB_NAND_defconfig
-F:	configs/P1025RDB_SDCARD_defconfig
-F:	configs/P1025RDB_SPIFLASH_defconfig
 F:	configs/P2020RDB-PC_defconfig
 F:	configs/P2020RDB-PC_36BIT_defconfig
 F:	configs/P2020RDB-PC_36BIT_NAND_defconfig
diff --git a/board/freescale/p1_p2_rdb_pc/README b/board/freescale/p1_p2_rdb_pc/README
index b85cf0209e..adc273eb32 100644
--- a/board/freescale/p1_p2_rdb_pc/README
+++ b/board/freescale/p1_p2_rdb_pc/README
@@ -7,7 +7,6 @@  P1_P2_RDB_PC represents a set of boards including
     P1020UTM-PC
     P1021RDB-PC
     P1024RDB
-    P1025RDB
     P2020RDB-PC
 
 They have similar design of P1020RDB but have DDR3 instead of DDR2. P2020RDB-PC
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 2346f6a0c2..850e1c7103 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -146,8 +146,7 @@  dimm_params_t ddr_raw_timing = {
 	.refresh_rate_ps = 7800000,
 	.tfaw_ps = 37500,
 };
-#elif	defined(CONFIG_TARGET_P1024RDB) || \
-	defined(CONFIG_TARGET_P1025RDB)
+#elif	defined(CONFIG_TARGET_P1024RDB)
 /*
  * Samsung K4B2G0846C-HCH9
  * The following timing are for "downshift"
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 7c703b354f..ce111a9fad 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -53,7 +53,7 @@ 
 #define GPIO_2BIT_MASK		(0x3 << (32 - (GPIO_DDR_RST_PIN + 1) * 2))
 #endif
 
-#if defined(CONFIG_TARGET_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
+#if defined(CONFIG_TARGET_P1021RDB)
 #define PCA_IOPORT_I2C_ADDR		0x23
 #define PCA_IOPORT_OUTPUT_CMD		0x2
 #define PCA_IOPORT_CFG_CMD		0x6
@@ -70,43 +70,6 @@  const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{0,  15, 1, 0, 0}, /* GPIO11/A15  - WDI */
 	{GPIO_GETH_SW_PORT, GPIO_GETH_SW_PIN, 1, 0, 0},	/* RST_GETH_SW_N */
 	{GPIO_SLIC_PORT, GPIO_SLIC_PIN, 1, 0, 0},	/* RST_SLIC_N */
-
-#ifdef CONFIG_TARGET_P1025RDB
-	/* QE_MUX_MDC */
-	{1,  19, 1, 0, 1}, /* QE_MUX_MDC               */
-
-	/* QE_MUX_MDIO */
-	{1,  20, 3, 0, 1}, /* QE_MUX_MDIO              */
-
-	/* UCC_1_MII */
-	{0, 23, 2, 0, 2}, /* CLK12 */
-	{0, 24, 2, 0, 1}, /* CLK9 */
-	{0,  7, 1, 0, 2}, /* ENET1_TXD0_SER1_TXD0      */
-	{0,  9, 1, 0, 2}, /* ENET1_TXD1_SER1_TXD1      */
-	{0, 11, 1, 0, 2}, /* ENET1_TXD2_SER1_TXD2      */
-	{0, 12, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3      */
-	{0,  6, 2, 0, 2}, /* ENET1_RXD0_SER1_RXD0      */
-	{0, 10, 2, 0, 2}, /* ENET1_RXD1_SER1_RXD1      */
-	{0, 14, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2      */
-	{0, 15, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3      */
-	{0,  5, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B    */
-	{0, 13, 1, 0, 2}, /* ENET1_TX_ER               */
-	{0,  4, 2, 0, 2}, /* ENET1_RX_DV_SER1_CTS_B    */
-	{0,  8, 2, 0, 2}, /* ENET1_RX_ER_SER1_CD_B    */
-	{0, 17, 2, 0, 2}, /* ENET1_CRS    */
-	{0, 16, 2, 0, 2}, /* ENET1_COL    */
-
-	/* UCC_5_RMII */
-	{1, 11, 2, 0, 1}, /* CLK13 */
-	{1, 7,  1, 0, 2}, /* ENET5_TXD0_SER5_TXD0      */
-	{1, 10, 1, 0, 2}, /* ENET5_TXD1_SER5_TXD1      */
-	{1, 6, 2, 0, 2}, /* ENET5_RXD0_SER5_RXD0      */
-	{1, 9, 2, 0, 2}, /* ENET5_RXD1_SER5_RXD1      */
-	{1, 5, 1, 0, 2}, /* ENET5_TX_EN_SER5_RTS_B    */
-	{1, 4, 2, 0, 2}, /* ENET5_RX_DV_SER5_CTS_B    */
-	{1, 8, 2, 0, 2}, /* ENET5_RX_ER_SER5_CD_B    */
-#endif
-
 	{0,  0, 0, 0, QE_IOP_TAB_END} /* END of table */
 };
 #endif
@@ -407,7 +370,7 @@  int board_eth_init(struct bd_info *bis)
 }
 
 #if defined(CONFIG_QE) && \
-	(defined(CONFIG_TARGET_P1025RDB) || defined(CONFIG_TARGET_P1021RDB))
+	(defined(CONFIG_TARGET_P1021RDB))
 static void fdt_board_fixup_qe_pins(void *blob)
 {
 	unsigned int oldbus;
@@ -478,7 +441,7 @@  int ft_board_setup(void *blob, struct bd_info *bd)
 #ifdef CONFIG_QE
 	do_fixup_by_compat(blob, "fsl,qe", "status", "okay",
 			sizeof("okay"), 0);
-#if defined(CONFIG_TARGET_P1025RDB) || defined(CONFIG_TARGET_P1021RDB)
+#if defined(CONFIG_TARGET_P1021RDB)
 	fdt_board_fixup_qe_pins(blob);
 #endif
 #endif
diff --git a/configs/P1025RDB_36BIT_defconfig b/configs/P1025RDB_36BIT_defconfig
deleted file mode 100644
index d0fc144d8f..0000000000
--- a/configs/P1025RDB_36BIT_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@ 
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_P1025RDB=y
-CONFIG_PHYS_64BIT=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1025RDB_NAND_defconfig b/configs/P1025RDB_NAND_defconfig
deleted file mode 100644
index 58efd11e94..0000000000
--- a/configs/P1025RDB_NAND_defconfig
+++ /dev/null
@@ -1,81 +0,0 @@ 
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_ENV_SIZE=0x4000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_TEXT_BASE=0xFF800000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_TPL_LIBCOMMON_SUPPORT=y
-CONFIG_TPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_P1025RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_TPL=y
-CONFIG_TPL_ENV_SUPPORT=y
-CONFIG_TPL_I2C_SUPPORT=y
-CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_TPL_NAND_SUPPORT=y
-CONFIG_TPL_SERIAL_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1025RDB_SDCARD_defconfig b/configs/P1025RDB_SDCARD_defconfig
deleted file mode 100644
index dad06be547..0000000000
--- a/configs/P1025RDB_SDCARD_defconfig
+++ /dev/null
@@ -1,74 +0,0 @@ 
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x0
-CONFIG_SPL_TEXT_BASE=0xf8f81000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_P1025RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SDCARD"
-CONFIG_BOOTDELAY=10
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1025RDB_SPIFLASH_defconfig b/configs/P1025RDB_SPIFLASH_defconfig
deleted file mode 100644
index 48e3540986..0000000000
--- a/configs/P1025RDB_SPIFLASH_defconfig
+++ /dev/null
@@ -1,77 +0,0 @@ 
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x11001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_TEXT_BASE=0xf8f81000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_P1025RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH"
-CONFIG_BOOTDELAY=10
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/P1025RDB_defconfig b/configs/P1025RDB_defconfig
deleted file mode 100644
index 7164526b71..0000000000
--- a/configs/P1025RDB_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@ 
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-# CONFIG_CMD_ERRATA is not set
-CONFIG_TARGET_P1025RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-# CONFIG_MISC_INIT_R is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-# CONFIG_CMD_HASH is not set
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 1b74177b2f..91c2c06be0 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -104,21 +104,6 @@ 
 #define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
-#if defined(CONFIG_TARGET_P1025RDB)
-#define CONFIG_BOARDNAME "P1025RDB"
-#define CONFIG_NAND_FSL_ELBC
-#define CONFIG_SLIC
-
-#define CONFIG_SYS_LBC_LBCR	0x00080000	/* Implement conversion of
-						addresses in the LBC */
-#define __SW_BOOT_MASK		0xf3
-#define __SW_BOOT_NOR		0x00
-#define __SW_BOOT_SPI		0x08
-#define __SW_BOOT_SD		0x04
-#define __SW_BOOT_NAND		0x0c
-#define CONFIG_SYS_L2_SIZE	(256 << 10)
-#endif
-
 #if defined(CONFIG_TARGET_P2020RDB)
 #define CONFIG_BOARDNAME "P2020RDB-PC"
 #define CONFIG_NAND_FSL_ELBC
@@ -654,42 +639,6 @@ 
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #endif /* CONFIG_QE */
 
-#ifdef CONFIG_TARGET_P1025RDB
-/*
- * QE UEC ethernet configuration
- */
-#define CONFIG_MIIM_ADDRESS	(CONFIG_SYS_CCSRBAR + 0x82120)
-
-#undef CONFIG_UEC_ETH
-#define CONFIG_PHY_MODE_NEED_CHANGE
-
-#define CONFIG_UEC_ETH1	/* ETH1 */
-#define CONFIG_HAS_ETH0
-
-#ifdef CONFIG_UEC_ETH1
-#define CONFIG_SYS_UEC1_UCC_NUM	0	/* UCC1 */
-#define CONFIG_SYS_UEC1_RX_CLK	QE_CLK12 /* CLK12 for MII */
-#define CONFIG_SYS_UEC1_TX_CLK	QE_CLK9 /* CLK9 for MII */
-#define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
-#define CONFIG_SYS_UEC1_PHY_ADDR	0x0	/* 0x0 for MII */
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
-#define CONFIG_SYS_UEC1_INTERFACE_SPEED	100
-#endif /* CONFIG_UEC_ETH1 */
-
-#define CONFIG_UEC_ETH5	/* ETH5 */
-#define CONFIG_HAS_ETH1
-
-#ifdef CONFIG_UEC_ETH5
-#define CONFIG_SYS_UEC5_UCC_NUM	4	/* UCC5 */
-#define CONFIG_SYS_UEC5_RX_CLK	QE_CLK_NONE
-#define CONFIG_SYS_UEC5_TX_CLK	QE_CLK13 /* CLK 13 for RMII */
-#define CONFIG_SYS_UEC5_ETH_TYPE	FAST_ETH
-#define CONFIG_SYS_UEC5_PHY_ADDR	0x3	/* 0x3 for RMII */
-#define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
-#define CONFIG_SYS_UEC5_INTERFACE_SPEED	100
-#endif /* CONFIG_UEC_ETH5 */
-#endif /* CONFIG_TARGET_P1025RDB */
-
 /*
  * Environment
  */