@@ -185,6 +185,18 @@ config INPUT_APMPOWER
To compile this driver as a module, choose M here: the
module will be called apm-power.
+config INPUT_COVER_DETECT
+ tristate "Enable cover attach detection"
+ help
+ Say Y here to enable cover attach detection
+ and send a event when cover is attached/detached.
+ Active gpio state is low and active event value is 0.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cover_detect.
+
comment "Input Device Drivers"
source "drivers/input/keyboard/Kconfig"
@@ -29,3 +29,5 @@ obj-$(CONFIG_INPUT_MISC) += misc/
obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o
obj-$(CONFIG_RMI4_CORE) += rmi4/
+
+obj-$(CONFIG_INPUT_COVER_DETECT)+= cover_detect.o
new file mode 100644
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Support detection for cover attachment
+ *
+ * Copyright (C) 2020 Samsung Electronics Co. Ltd. All Rights Reserved.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/wakelock.h>
+
+struct cover_detect_drvdata {
+ struct input_dev *input;
+ struct delayed_work cover_detect_dwork;
+ struct wakeup_source *ws;
+ int gpio_cover_detect;
+ int irq_cover_detect;
+};
+
+static void cover_detect_work(struct work_struct *work)
+{
+ struct cover_detect_drvdata *ddata =
+ container_of(work, struct cover_detect_drvdata,
+ cover_detect_dwork.work);
+ bool cover_status;
+
+ cover_status = gpio_get_value(ddata->gpio_cover_detect);
+
+ input_report_switch(ddata->input,
+ SW_COVER_ATTACHED, cover_status);
+ input_sync(ddata->input);
+}
+
+static void __cover_detect(struct cover_detect_drvdata *ddata,
+ bool cover_status)
+{
+ cancel_delayed_work_sync(&ddata->cover_detect_dwork);
+ if (cover_status) {
+ __pm_wakeup_event(ddata->ws, jiffies_to_msecs(HZ / 20));
+ schedule_delayed_work(&ddata->cover_detect_dwork, HZ * 1 / 100);
+ } else {
+ __pm_relax(ddata->ws);
+ schedule_delayed_work(&ddata->cover_detect_dwork, 0);
+ }
+}
+
+static irqreturn_t cover_detect_irq(int irq, void *dev_id)
+{
+ bool cover_status;
+ struct cover_detect_drvdata *ddata = dev_id;
+
+ cover_status = gpio_get_value(ddata->gpio_cover_detect);
+
+ __cover_detect(ddata, cover_status);
+
+ return IRQ_HANDLED;
+}
+
+static int cover_detect_open(struct input_dev *input)
+{
+ struct cover_detect_drvdata *ddata = input_get_drvdata(input);
+ /* update the current status */
+ schedule_delayed_work(&ddata->cover_detect_dwork, HZ / 2);
+ /* Report current state of buttons that are connected to GPIOs */
+ input_sync(input);
+
+ return 0;
+}
+
+static void cover_detect_close(struct input_dev *input)
+{
+}
+
+static void init_cover_detect_irq(struct input_dev *input)
+{
+ struct cover_detect_drvdata *ddata = input_get_drvdata(input);
+
+ int ret = 0;
+ int irq = ddata->irq_cover_detect;
+
+ ret = request_threaded_irq(
+ irq, NULL,
+ cover_detect_irq,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "cover_detect", ddata);
+ if (ret < 0)
+ pr_err("keys: failed to request cover detect irq %d gpio %d\n",
+ irq, ddata->gpio_cover_detect);
+}
+
+#ifdef CONFIG_OF
+static int of_cover_detect_data_parsing_dt(struct device *dev,
+ struct cover_detect_drvdata *ddata)
+{
+ struct device_node *np = dev->of_node;
+ int gpio;
+ enum of_gpio_flags flags;
+
+ gpio = of_get_named_gpio_flags(np, "gpio_cover_detect", 0, &flags);
+ ddata->gpio_cover_detect = gpio;
+
+ ddata->irq_cover_detect = gpio_to_irq(gpio);
+
+ return 0;
+}
+#endif
+
+static int cover_detect_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct cover_detect_drvdata *ddata;
+ struct input_dev *input;
+ int error;
+ int wakeup = 0;
+
+ ddata = kzalloc(sizeof(struct cover_detect_drvdata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+#ifdef CONFIG_OF
+ if (dev->of_node) {
+ error = of_cover_detect_data_parsing_dt(dev, ddata);
+ if (error < 0) {
+ dev_err(dev, "fail to get the devicetree, error: %d\n",
+ error);
+ goto fail1;
+ }
+ }
+#endif
+
+ input = input_allocate_device();
+ if (!input) {
+ dev_err(dev, "failed to allocate state\n");
+ error = -ENOMEM;
+ goto fail1;
+ }
+
+ ddata->input = input;
+
+ ddata->ws = wakeup_source_register(NULL, "cover_detect");
+
+ platform_set_drvdata(pdev, ddata);
+ input_set_drvdata(input, ddata);
+
+ input->name = "cover_detect";
+ input->phys = "cover_detect";
+ input->dev.parent = &pdev->dev;
+
+ input->evbit[0] |= BIT_MASK(EV_SW);
+ input_set_capability(input, EV_SW, SW_COVER_ATTACHED);
+
+ input->open = cover_detect_open;
+ input->close = cover_detect_close;
+
+ /* Enable auto repeat feature of Linux input subsystem */
+ __set_bit(EV_REP, input->evbit);
+
+ INIT_DELAYED_WORK(&ddata->cover_detect_dwork, cover_detect_work);
+
+ init_cover_detect_irq(input);
+
+ if (ddata->gpio_cover_detect != 0) {
+ error = input_register_device(input);
+ if (error) {
+ dev_err(dev, "Unable to register input device, error: %d\n",
+ error);
+ goto fail1;
+ }
+ }
+
+ device_init_wakeup(&pdev->dev, wakeup);
+
+ return 0;
+
+ fail1:
+ kfree(ddata);
+
+ return error;
+}
+
+static int cover_detect_remove(struct platform_device *pdev)
+{
+ struct cover_detect_drvdata *ddata = platform_get_drvdata(pdev);
+ struct input_dev *input = ddata->input;
+
+ device_init_wakeup(&pdev->dev, 0);
+
+ input_unregister_device(input);
+
+ wakeup_source_unregister(ddata->ws);
+
+ kfree(ddata);
+
+ return 0;
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id cover_detect_dt_ids[] = {
+ { .compatible = "cover_detect" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, cover_detect_dt_ids);
+#endif /* CONFIG_OF */
+
+static struct platform_driver cover_detect_device_driver = {
+ .probe = cover_detect_probe,
+ .remove = cover_detect_remove,
+ .driver = {
+ .name = "cover_detect",
+ .owner = THIS_MODULE,
+#if defined(CONFIG_OF)
+ .of_match_table = cover_detect_dt_ids,
+#endif /* CONFIG_OF */
+ }
+};
+
+static int __init cover_detect_init(void)
+{
+ return platform_driver_register(&cover_detect_device_driver);
+}
+
+static void __exit cover_detect_exit(void)
+{
+ platform_driver_unregister(&cover_detect_device_driver);
+}
+
+module_init(cover_detect_init);
+module_exit(cover_detect_exit);
@@ -320,7 +320,7 @@ struct pcmcia_device_id {
#define INPUT_DEVICE_ID_LED_MAX 0x0f
#define INPUT_DEVICE_ID_SND_MAX 0x07
#define INPUT_DEVICE_ID_FF_MAX 0x7f
-#define INPUT_DEVICE_ID_SW_MAX 0x10
+#define INPUT_DEVICE_ID_SW_MAX 0x11
#define INPUT_DEVICE_ID_PROP_MAX 0x1f
#define INPUT_DEVICE_ID_MATCH_BUS 1
@@ -889,7 +889,8 @@
#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_PEN_INSERTED 0x0f /* set = pen inserted */
#define SW_MACHINE_COVER 0x10 /* set = cover closed */
-#define SW_MAX 0x10
+#define SW_COVER_ATTACHED 0x11 /* set = cover attached */
+#define SW_MAX 0x11
#define SW_CNT (SW_MAX+1)
/*
We need support to various accessories on the device, some requiring switch does not exist in switch list. So added switch for the following purpose. SW_COVER_ATTACHED is for the checking the cover attached or not on the device. We also added driver that uses such event. Signed-off-by: Hyungjae Im <hj2.im@samsung.com> --- drivers/input/Kconfig | 12 ++ drivers/input/Makefile | 2 + drivers/input/cover_detect.c | 236 +++++++++++++++++++++++++ include/linux/mod_devicetable.h | 2 +- include/uapi/linux/input-event-codes.h | 3 +- 5 files changed, 253 insertions(+), 2 deletions(-) create mode 100644 drivers/input/cover_detect.c