diff mbox series

[v2,3/3] wcn36xx: Enable firmware offloaded keepalive

Message ID 20201103121735.291324-4-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series wcn36xx: Firmware link monitor/keepalive offload | expand

Commit Message

Bryan O'Donoghue Nov. 3, 2020, 12:17 p.m. UTC
This patch calls wcn36xx_smd_keep_alive_req() on the STA patch immediately
after associating with an AP.

This will cause the firmware to send a NULL packet out to the AP every 30
seconds, thus offloading keep-alive processing from the SoC to the
firmware.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/main.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index e924cc4acde0..5867bd9c2f64 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -910,6 +910,7 @@  static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw,
 			 * place where AID is available.
 			 */
 			wcn36xx_smd_config_sta(wcn, vif, sta);
+			wcn36xx_enable_keep_alive_null_packet(wcn, vif);
 		} else {
 			wcn36xx_dbg(WCN36XX_DBG_MAC,
 				    "disassociated bss %pM vif %pM AID=%d\n",