@@ -221,7 +221,7 @@ static const struct ieee80211_iface_combination if_comb_radar[] = {
{
.limits = if_limits,
.n_limits = ARRAY_SIZE(if_limits),
- .max_interfaces = 4,
+ .max_interfaces = MT7615_MAX_INTERFACES,
.num_different_channels = 1,
.beacon_int_infra_match = true,
.radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) |
@@ -237,7 +237,7 @@ static const struct ieee80211_iface_combination if_comb[] = {
{
.limits = if_limits,
.n_limits = ARRAY_SIZE(if_limits),
- .max_interfaces = 4,
+ .max_interfaces = MT7615_MAX_INTERFACES,
.num_different_channels = 1,
.beacon_int_infra_match = true,
}
@@ -115,29 +115,50 @@ static void mt7615_stop(struct ieee80211_hw *hw)
mt7615_mutex_release(dev);
}
-static int get_omac_idx(enum nl80211_iftype type, u32 mask)
+static inline int get_free_idx(u32 mask, u8 start, u8 end)
+{
+ return ffs(~mask & GENMASK(end, start));
+}
+
+static int get_omac_idx(enum nl80211_iftype type, u64 mask)
{
int i;
switch (type) {
- case NL80211_IFTYPE_MONITOR:
- case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_ADHOC:
- /* ap use hw bssid 0 and ext bssid */
+ case NL80211_IFTYPE_STATION:
+ /* prefer hw bssid slot 1-3 */
+ i = get_free_idx(mask, HW_BSSID_1, HW_BSSID_3);
+ if (i)
+ return i - 1;
+
+ if (type != NL80211_IFTYPE_STATION)
+ break;
+
+ /* next, try to find a free repeater entry for the sta */
+ i = get_free_idx(mask >> REPEATER_BSSID_START, 0,
+ REPEATER_BSSID_MAX - REPEATER_BSSID_START);
+ if (i)
+ return i + 32 - 1;
+
+ i = get_free_idx(mask, EXT_BSSID_1, EXT_BSSID_MAX);
+ if (i)
+ return i - 1;
+
if (~mask & BIT(HW_BSSID_0))
return HW_BSSID_0;
- for (i = EXT_BSSID_1; i < EXT_BSSID_END; i++)
- if (~mask & BIT(i))
- return i;
-
break;
- case NL80211_IFTYPE_STATION:
- /* sta use hw bssid other than 0 */
- for (i = HW_BSSID_1; i < HW_BSSID_MAX; i++)
- if (~mask & BIT(i))
- return i;
+ case NL80211_IFTYPE_MONITOR:
+ case NL80211_IFTYPE_AP:
+ /* ap uses hw bssid 0 and ext bssid */
+ if (~mask & BIT(HW_BSSID_0))
+ return HW_BSSID_0;
+
+ i = get_free_idx(mask, EXT_BSSID_1, EXT_BSSID_MAX);
+ if (i)
+ return i - 1;
break;
default:
@@ -187,8 +208,8 @@ static int mt7615_add_interface(struct ieee80211_hw *hw,
mvif->wmm_idx = mvif->idx % MT7615_MAX_WMM_SETS;
dev->mphy.vif_mask |= BIT(mvif->idx);
- dev->omac_mask |= BIT(mvif->omac_idx);
- phy->omac_mask |= BIT(mvif->omac_idx);
+ dev->omac_mask |= BIT_ULL(mvif->omac_idx);
+ phy->omac_mask |= BIT_ULL(mvif->omac_idx);
mt7615_mcu_set_dbdc(dev);
@@ -257,8 +278,8 @@ static void mt7615_remove_interface(struct ieee80211_hw *hw,
rcu_assign_pointer(dev->mt76.wcid[idx], NULL);
dev->mphy.vif_mask &= ~BIT(mvif->idx);
- dev->omac_mask &= ~BIT(mvif->omac_idx);
- phy->omac_mask &= ~BIT(mvif->omac_idx);
+ dev->omac_mask &= ~BIT_ULL(mvif->omac_idx);
+ phy->omac_mask &= ~BIT_ULL(mvif->omac_idx);
mt7615_mutex_release(dev);
@@ -599,6 +599,42 @@ static int mt7615_mcu_init_download(struct mt7615_dev *dev, u32 addr,
&req, sizeof(req), true);
}
+static int
+mt7615_mcu_muar_config(struct mt7615_dev *dev, struct ieee80211_vif *vif,
+ bool bssid, bool enable)
+{
+ struct mt7615_vif *mvif = (struct mt7615_vif *)vif->drv_priv;
+ u32 idx = mvif->omac_idx - REPEATER_BSSID_START;
+ u32 mask = dev->omac_mask >> 32 & ~BIT(idx);
+ const u8 *addr = vif->addr;
+ struct {
+ u8 mode;
+ u8 force_clear;
+ u8 clear_bitmap[8];
+ u8 entry_count;
+ u8 write;
+
+ u8 index;
+ u8 bssid;
+ u8 addr[ETH_ALEN];
+ } __packed req = {
+ .mode = !!mask || enable,
+ .entry_count = 1,
+ .write = 1,
+
+ .index = idx * 2 + bssid,
+ };
+
+ if (bssid)
+ addr = vif->bss_conf.bssid;
+
+ if (enable)
+ ether_addr_copy(req.addr, addr);
+
+ return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_MUAR_UPDATE, &req,
+ sizeof(req), true);
+}
+
static int
mt7615_mcu_add_dev(struct mt7615_dev *dev, struct ieee80211_vif *vif,
bool enable)
@@ -634,6 +670,9 @@ mt7615_mcu_add_dev(struct mt7615_dev *dev, struct ieee80211_vif *vif,
},
};
+ if (mvif->omac_idx >= REPEATER_BSSID_START)
+ return mt7615_mcu_muar_config(dev, vif, false, enable);
+
memcpy(data.tlv.omac_addr, vif->addr, ETH_ALEN);
return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_DEV_INFO_UPDATE,
&data, sizeof(data), true);
@@ -1216,6 +1255,9 @@ mt7615_mcu_add_bss(struct mt7615_phy *phy, struct ieee80211_vif *vif,
struct mt7615_dev *dev = phy->dev;
struct sk_buff *skb;
+ if (mvif->omac_idx >= REPEATER_BSSID_START)
+ mt7615_mcu_muar_config(dev, vif, true, enable);
+
skb = mt7615_mcu_alloc_sta_req(dev, mvif, NULL);
if (IS_ERR(skb))
return PTR_ERR(skb);
@@ -1225,7 +1267,8 @@ mt7615_mcu_add_bss(struct mt7615_phy *phy, struct ieee80211_vif *vif,
mt7615_mcu_bss_basic_tlv(skb, vif, sta, enable);
- if (enable && mvif->omac_idx > EXT_BSSID_START)
+ if (enable && mvif->omac_idx >= EXT_BSSID_START &&
+ mvif->omac_idx < REPEATER_BSSID_START)
mt7615_mcu_bss_ext_tlv(skb, mvif);
return mt76_mcu_skb_send_msg(&dev->mt76, skb,
@@ -2603,13 +2646,13 @@ int mt7615_mcu_set_dbdc(struct mt7615_dev *dev)
} while (0)
for (i = 0; i < 4; i++) {
- bool band = !!(ext_phy->omac_mask & BIT(i));
+ bool band = !!(ext_phy->omac_mask & BIT_ULL(i));
ADD_DBDC_ENTRY(DBDC_TYPE_BSS, i, band);
}
for (i = 0; i < 14; i++) {
- bool band = !!(ext_phy->omac_mask & BIT(0x11 + i));
+ bool band = !!(ext_phy->omac_mask & BIT_ULL(0x11 + i));
ADD_DBDC_ENTRY(DBDC_TYPE_MBSS, i, band);
}
@@ -275,6 +275,7 @@ enum {
MCU_EXT_CMD_PROTECT_CTRL = 0x3e,
MCU_EXT_CMD_DBDC_CTRL = 0x45,
MCU_EXT_CMD_MAC_INIT_CTRL = 0x46,
+ MCU_EXT_CMD_MUAR_UPDATE = 0x48,
MCU_EXT_CMD_BCN_OFFLOAD = 0x49,
MCU_EXT_CMD_SET_RX_PATH = 0x4e,
MCU_EXT_CMD_TX_POWER_FEATURE_CTRL = 0x58,
@@ -11,7 +11,7 @@
#include "../mt76.h"
#include "regs.h"
-#define MT7615_MAX_INTERFACES 4
+#define MT7615_MAX_INTERFACES 16
#define MT7615_MAX_WMM_SETS 4
#define MT7663_WTBL_SIZE 32
#define MT7615_WTBL_SIZE 128
@@ -176,7 +176,7 @@ struct mt7615_phy {
struct ieee80211_vif *monitor_vif;
u32 rxfilter;
- u32 omac_mask;
+ u64 omac_mask;
u16 noise;
@@ -346,24 +346,13 @@ enum {
HW_BSSID_1,
HW_BSSID_2,
HW_BSSID_3,
- HW_BSSID_MAX,
+ HW_BSSID_MAX = HW_BSSID_3,
EXT_BSSID_START = 0x10,
EXT_BSSID_1,
- EXT_BSSID_2,
- EXT_BSSID_3,
- EXT_BSSID_4,
- EXT_BSSID_5,
- EXT_BSSID_6,
- EXT_BSSID_7,
- EXT_BSSID_8,
- EXT_BSSID_9,
- EXT_BSSID_10,
- EXT_BSSID_11,
- EXT_BSSID_12,
- EXT_BSSID_13,
- EXT_BSSID_14,
- EXT_BSSID_15,
- EXT_BSSID_END
+ EXT_BSSID_15 = 0x1f,
+ EXT_BSSID_MAX = EXT_BSSID_15,
+ REPEATER_BSSID_START = 0x20,
+ REPEATER_BSSID_MAX = 0x3f,
};
enum {
When looking for a MAC address slot, start by using main BSSID slots 1-3, afterwards use 16 repeater mode BSSID slots, then start using the slots usually used for AP mode. This search order should prevent unnecessary conflicts with AP mode interfaces on the same PHY. Note that two PHYs share global 32 omac slots with each other. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> --- .../net/wireless/mediatek/mt76/mt7615/init.c | 4 +- .../net/wireless/mediatek/mt76/mt7615/main.c | 55 +++++++++++++------ .../net/wireless/mediatek/mt76/mt7615/mcu.c | 49 ++++++++++++++++- .../net/wireless/mediatek/mt76/mt7615/mcu.h | 1 + .../wireless/mediatek/mt76/mt7615/mt7615.h | 25 +++------ 5 files changed, 94 insertions(+), 40 deletions(-) -- 2.18.0