[net,08/27] can: j1939: rename jacd tool

Message ID	20201103220636.972106-9-mkl@pengutronix.de
State	New
Headers	show Return-Path: <SRS0=3IIy=EJ=vger.kernel.org=netdev-owner@kernel.org> From: Marc Kleine-Budde <mkl@pengutronix.de> To: netdev@vger.kernel.org Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org, kernel@pengutronix.de, Yegor Yefremov <yegorslists@googlemail.com>, Marc Kleine-Budde <mkl@pengutronix.de> Subject: [net 08/27] can: j1939: rename jacd tool Date: Tue, 3 Nov 2020 23:06:17 +0100 Message-Id: <20201103220636.972106-9-mkl@pengutronix.de> In-Reply-To: <20201103220636.972106-1-mkl@pengutronix.de> References: <20201103220636.972106-1-mkl@pengutronix.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	None \| expand [net,02/27] dt-bindings: can: flexcan: convert fsl,*flexcan bindings to yaml [net,04/27] can: rx-offload: don't call kfree_skb() from IRQ context [net,05/27] can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ context [net,06/27] can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames [net,08/27] can: j1939: rename jacd tool [net,10/27] can: j1939: swap addr and pgn in the send example [net,12/27] can: j1939: j1939_sk_bind(): return failure if netdev is down [net,14/27] can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode [net,16/27] can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path [net,18/27] can: peak_usb: add range checking in decode operations [net,20/27] can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on [net,21/27] can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error mess... [net,26/27] can: flexcan: add ECC initialization for VF610 [net,27/27] can: flexcan: flexcan_remove(): disable wakeup completely

Message ID

20201103220636.972106-9-mkl@pengutronix.de

State

New

Headers

From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
	kernel@pengutronix.de, Yegor Yefremov <yegorslists@googlemail.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [net 08/27] can: j1939: rename jacd tool
Date: Tue,  3 Nov 2020 23:06:17 +0100
Message-Id: <20201103220636.972106-9-mkl@pengutronix.de>
In-Reply-To: <20201103220636.972106-1-mkl@pengutronix.de>
References: <20201103220636.972106-1-mkl@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Series

None | expand

Commit Message

Marc Kleine-Budde Nov. 3, 2020, 10:06 p.m. UTC

From: Yegor Yefremov <yegorslists@googlemail.com>

Due to naming conflicts, jacd was renamed to j1939acd in:

    https://github.com/linux-can/can-utils/pull/199

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Link: https://lore.kernel.org/r/20201020081134.3597-1-yegorslists@googlemail.com
Link: https://github.com/linux-can/can-utils/pull/199
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 Documentation/networking/j1939.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/networking/j1939.rst b/Documentation/networking/j1939.rst
index f5be243d250a..081dfc2e0452 100644
--- a/Documentation/networking/j1939.rst
+++ b/Documentation/networking/j1939.rst
@@ -376,7 +376,7 @@  only j1939.addr changed to the new SA, and must then send a valid address claim
 packet. This restarts the state machine in the kernel (and any other
 participant on the bus) for this NAME.
 
-can-utils also include the jacd tool, so it can be used as code example or as
+can-utils also include the j1939acd tool, so it can be used as code example or as
 default Address Claiming daemon.
 
 Send Examples

[net,08/27] can: j1939: rename jacd tool

Commit Message

Patch