| Message ID | 20201102075821.26873-1-dqfext@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v2,net-next] net: dsa: mt7530: support setting MTU | expand |
On Mon, Nov 02, 2020 at 03:58:21PM +0800, DENG Qingfang wrote: > MT7530/7531 has a global RX packet length register, which can be used > to set MTU. > > Supported packet length values are 1522 (1518 if untagged), 1536, 1552, > and multiple of 1024 (from 2048 to 15360). > > Signed-off-by: DENG Qingfang <dqfext@gmail.com> > --- > v1 -> v2: > Avoid duplication of mt7530_rmw() > Fix code wrapping > --- > drivers/net/dsa/mt7530.c | 49 ++++++++++++++++++++++++++++++++++++++++ > drivers/net/dsa/mt7530.h | 12 ++++++++++ > 2 files changed, 61 insertions(+) > > diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c > index de7692b763d8..ca39f81de75a 100644 > --- a/drivers/net/dsa/mt7530.c > +++ b/drivers/net/dsa/mt7530.c > @@ -1021,6 +1021,53 @@ mt7530_port_disable(struct dsa_switch *ds, int port) > mutex_unlock(&priv->reg_mutex); > } > > +static int > +mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) > +{ > + struct mt7530_priv *priv = ds->priv; > + struct mii_bus *bus = priv->bus; > + int length; > + u32 val; > + > + /* When a new MTU is set, DSA always set the CPU port's MTU to the > + * largest MTU of the slave ports. Because the switch only has a global > + * RX length register, only allowing CPU port here is enough. > + */ > + if (!dsa_is_cpu_port(ds, port)) > + return 0; > + > + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); > + > + val = mt7530_mii_read(priv, MT7530_GMACCR); > + val &= ~MAX_RX_PKT_LEN_MASK; > + > + /* RX length also includes Ethernet header, MTK tag, and FCS length */ > + length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN; > + if (length <= 1522) > + val |= MAX_RX_PKT_LEN_1522; Could you please fix the checkpatch warnings here? > + else if (length <= 1536) > + val |= MAX_RX_PKT_LEN_1536; > + else if (length <= 1552) > + val |= MAX_RX_PKT_LEN_1552; > + else { > + val &= ~MAX_RX_JUMBO_MASK; > + val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024)); > + val |= MAX_RX_PKT_LEN_JUMBO; > + } > + > + mt7530_mii_write(priv, MT7530_GMACCR, val); > + > + mutex_unlock(&bus->mdio_lock); > + > + return 0; > +} > +
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index de7692b763d8..ca39f81de75a 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1021,6 +1021,53 @@ mt7530_port_disable(struct dsa_switch *ds, int port) mutex_unlock(&priv->reg_mutex); } +static int +mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct mt7530_priv *priv = ds->priv; + struct mii_bus *bus = priv->bus; + int length; + u32 val; + + /* When a new MTU is set, DSA always set the CPU port's MTU to the + * largest MTU of the slave ports. Because the switch only has a global + * RX length register, only allowing CPU port here is enough. + */ + if (!dsa_is_cpu_port(ds, port)) + return 0; + + mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); + + val = mt7530_mii_read(priv, MT7530_GMACCR); + val &= ~MAX_RX_PKT_LEN_MASK; + + /* RX length also includes Ethernet header, MTK tag, and FCS length */ + length = new_mtu + ETH_HLEN + MTK_HDR_LEN + ETH_FCS_LEN; + if (length <= 1522) + val |= MAX_RX_PKT_LEN_1522; + else if (length <= 1536) + val |= MAX_RX_PKT_LEN_1536; + else if (length <= 1552) + val |= MAX_RX_PKT_LEN_1552; + else { + val &= ~MAX_RX_JUMBO_MASK; + val |= MAX_RX_JUMBO(DIV_ROUND_UP(length, 1024)); + val |= MAX_RX_PKT_LEN_JUMBO; + } + + mt7530_mii_write(priv, MT7530_GMACCR, val); + + mutex_unlock(&bus->mdio_lock); + + return 0; +} + +static int +mt7530_port_max_mtu(struct dsa_switch *ds, int port) +{ + return MT7530_MAX_MTU; +} + static void mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state) { @@ -2519,6 +2566,8 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .get_sset_count = mt7530_get_sset_count, .port_enable = mt7530_port_enable, .port_disable = mt7530_port_disable, + .port_change_mtu = mt7530_port_change_mtu, + .port_max_mtu = mt7530_port_max_mtu, .port_stp_state_set = mt7530_stp_state_set, .port_bridge_join = mt7530_port_bridge_join, .port_bridge_leave = mt7530_port_bridge_leave, diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 9278a8e3d04e..77a6222d2635 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -11,6 +11,9 @@ #define MT7530_NUM_FDB_RECORDS 2048 #define MT7530_ALL_MEMBERS 0xff +#define MTK_HDR_LEN 4 +#define MT7530_MAX_MTU (15 * 1024 - ETH_HLEN - ETH_FCS_LEN - MTK_HDR_LEN) + enum mt753x_id { ID_MT7530 = 0, ID_MT7621 = 1, @@ -289,6 +292,15 @@ enum mt7530_vlan_port_attr { #define MT7531_DBG_CNT(x) (0x3018 + (x) * 0x100) #define MT7531_DIS_CLR BIT(31) +#define MT7530_GMACCR 0x30e0 +#define MAX_RX_JUMBO(x) ((x) << 2) +#define MAX_RX_JUMBO_MASK GENMASK(5, 2) +#define MAX_RX_PKT_LEN_MASK GENMASK(1, 0) +#define MAX_RX_PKT_LEN_1522 0x0 +#define MAX_RX_PKT_LEN_1536 0x1 +#define MAX_RX_PKT_LEN_1552 0x2 +#define MAX_RX_PKT_LEN_JUMBO 0x3 + /* Register for MIB */ #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100) #define MT7530_MIB_CCR 0x4fe0
MT7530/7531 has a global RX packet length register, which can be used to set MTU. Supported packet length values are 1522 (1518 if untagged), 1536, 1552, and multiple of 1024 (from 2048 to 15360). Signed-off-by: DENG Qingfang <dqfext@gmail.com> --- v1 -> v2: Avoid duplication of mt7530_rmw() Fix code wrapping --- drivers/net/dsa/mt7530.c | 49 ++++++++++++++++++++++++++++++++++++++++ drivers/net/dsa/mt7530.h | 12 ++++++++++ 2 files changed, 61 insertions(+)