diff mbox series

[4.14,123/125] staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice

Message ID 20201103203215.240028225@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH Nov. 3, 2020, 8:38 p.m. UTC 
From: Ian Abbott <abbotti@mev.co.uk>

commit 647a6002cb41d358d9ac5de101a8a6dc74748a59 upstream.

The "cb_pcidas" driver supports asynchronous commands on the analog
output (AO) subdevice for those boards that have an AO FIFO.  The code
(in `cb_pcidas_ao_check_chanlist()` and `cb_pcidas_ao_cmd()`) to
validate and set up the command supports output to a single channel or
to two channels simultaneously (the boards have two AO channels).
However, the code in `cb_pcidas_auto_attach()` that initializes the
subdevices neglects to initialize the AO subdevice's `len_chanlist`
member, leaving it set to 0, but the Comedi core will "correct" it to 1
if the driver neglected to set it.  This limits commands to use a single
channel (either channel 0 or 1), but the limit should be two channels.
Set the AO subdevice's `len_chanlist` member to be the same value as the
`n_chan` member, which will be 2.

Cc: <stable@vger.kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20201021122142.81628-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/cb_pcidas.c |    1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -1351,6 +1351,7 @@  static int cb_pcidas_auto_attach(struct
 		if (dev->irq && board->has_ao_fifo) {
 			dev->write_subdev = s;
 			s->subdev_flags	|= SDF_CMD_WRITE;
+			s->len_chanlist	= s->n_chan;
 			s->do_cmdtest	= cb_pcidas_ao_cmdtest;
 			s->do_cmd	= cb_pcidas_ao_cmd;
 			s->cancel	= cb_pcidas_ao_cancel;