deleted file mode 100644
@@ -1,337 +0,0 @@
-Audio Graph Card:
-
-Audio Graph Card specifies audio DAI connections of SoC <-> codec.
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
-
-Below are same as Simple-Card.
-
-- label
-- widgets
-- routing
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- mclk-fs
-- hp-det-gpio
-- mic-det-gpio
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Required properties:
-
-- compatible : "audio-graph-card";
-- dais : list of CPU DAI port{s}
-
-Optional properties:
-- pa-gpios: GPIO used to control external amplifier.
-
------------------------
-Example: Single DAI case
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- dais = <&cpu_port>;
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
- audio-codec {
- ...
- port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
- };
-
------------------------
-Example: Multi DAI case
------------------------
-
- sound-card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
-
- dais = <&cpu_port0
- &cpu_port1
- &cpu_port2>;
- };
-
- audio-codec@0 {
- ...
- port {
- codec0_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint0>;
- };
- };
- };
-
- audio-codec@1 {
- ...
- port {
- codec1_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint1>;
- };
- };
- };
-
- audio-codec@2 {
- ...
- port {
- codec2_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint2>;
- };
- };
- };
-
- dai-controller {
- ...
- ports {
- cpu_port0: port@0 {
- cpu_endpoint0: endpoint {
- remote-endpoint = <&codec0_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- cpu_port1: port@1 {
- cpu_endpoint1: endpoint {
- remote-endpoint = <&codec1_endpoint>;
-
- dai-format = "i2s";
- ...
- };
- };
- cpu_port2: port@2 {
- cpu_endpoint2: endpoint {
- remote-endpoint = <&codec2_endpoint>;
-
- dai-format = "i2s";
- ...
- };
- };
- };
- };
-
-
------------------------
-Example: Sampling Rate Conversion
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
- prefix = "codec";
- routing = "codec Playback", "DAI0 Playback",
- "DAI0 Capture", "codec Capture";
- convert-rate = <48000>;
-
- dais = <&cpu_port>;
- };
-
- audio-codec {
- ...
- port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
------------------------
-Example: 2 CPU 1 Codec (Mixing)
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
- routing = "codec Playback", "DAI0 Playback",
- "codec Playback", "DAI1 Playback",
- "DAI0 Capture", "codec Capture";
-
- dais = <&cpu_port>;
- };
-
- audio-codec {
- ...
-
- audio-graph-card,prefix = "codec";
- audio-graph-card,convert-rate = <48000>;
- port {
- reg = <0>;
- codec_endpoint0: endpoint@0 {
- remote-endpoint = <&cpu_endpoint0>;
- };
- codec_endpoint1: endpoint@1 {
- remote-endpoint = <&cpu_endpoint1>;
- };
- };
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint0: endpoint@0 {
- remote-endpoint = <&codec_endpoint0>;
-
- dai-format = "left_j";
- ...
- };
- cpu_endpoint1: endpoint@1 {
- remote-endpoint = <&codec_endpoint1>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
------------------------
-Example: Multi DAI with DPCM
------------------------
-
- CPU0 ------ ak4613
- CPU1 ------ HDMI
- CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */
- CPU3 --/ /* DPCM 3ch/4ch */
- CPU4 --/ /* DPCM 5ch/6ch */
- CPU5 --/ /* DPCM 7ch/8ch */
- CPU6 ------ PCM3168A-c
-
- sound_card: sound {
- compatible = "audio-graph-card";
-
- label = "sound-card";
-
- routing = "pcm3168a Playback", "DAI2 Playback",
- "pcm3168a Playback", "DAI3 Playback",
- "pcm3168a Playback", "DAI4 Playback",
- "pcm3168a Playback", "DAI5 Playback";
-
- dais = <&snd_port0 /* ak4613 */
- &snd_port1 /* HDMI0 */
- &snd_port2 /* pcm3168a playback */
- &snd_port3 /* pcm3168a capture */
- >;
- };
-
- ak4613: codec@10 {
- ...
- port {
- ak4613_endpoint: endpoint {
- remote-endpoint = <&rsnd_endpoint0>;
- };
- };
- };
-
- pcm3168a: audio-codec@44 {
- ...
- audio-graph-card,prefix = "pcm3168a";
- audio-graph-card,convert-channels = <8>; /* TDM Split */
- ports {
- port@0 {
- reg = <0>;
- pcm3168a_endpoint_p1: endpoint@1 {
- remote-endpoint = <&rsnd_endpoint2>;
- ...
- };
- pcm3168a_endpoint_p2: endpoint@2 {
- remote-endpoint = <&rsnd_endpoint3>;
- ...
- };
- pcm3168a_endpoint_p3: endpoint@3 {
- remote-endpoint = <&rsnd_endpoint4>;
- ...
- };
- pcm3168a_endpoint_p4: endpoint@4 {
- remote-endpoint = <&rsnd_endpoint5>;
- ...
- };
- };
- port@1 {
- reg = <1>;
- pcm3168a_endpoint_c: endpoint {
- remote-endpoint = <&rsnd_endpoint6>;
- ...
- };
- };
- };
- };
-
- &sound {
- ports {
- snd_port0: port@0 {
- rsnd_endpoint0: endpoint {
- remote-endpoint = <&ak4613_endpoint>;
- ...
- };
- };
- snd_port1: port@1 {
- rsnd_endpoint1: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
- ...
- };
- };
- snd_port2: port@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- rsnd_endpoint2: endpoint@2 {
- remote-endpoint = <&pcm3168a_endpoint_p1>;
- ...
- };
- rsnd_endpoint3: endpoint@3 {
- remote-endpoint = <&pcm3168a_endpoint_p2>;
- ...
- };
- rsnd_endpoint4: endpoint@4 {
- remote-endpoint = <&pcm3168a_endpoint_p3>;
- ...
- };
- rsnd_endpoint5: endpoint@5 {
- remote-endpoint = <&pcm3168a_endpoint_p4>;
- ...
- };
- };
- snd_port3: port@6 {
- rsnd_endpoint6: endpoint {
- remote-endpoint = <&pcm3168a_endpoint_c>;
- ...
- };
- };
- };
- };
new file mode 100644
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card Driver Device Tree Bindings
+
+maintainers:
+ - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+ compatible:
+ enum:
+ - audio-graph-card
+ - audio-graph-scu-card
+
+ dais:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ label:
+ maxItems: 1
+ prefix:
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ routing:
+ description: |
+ A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's source.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ widgets:
+ description: User specified audio sound widgets.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ pa-gpios:
+ maxItems: 1
+ hp-det-gpio:
+ maxItems: 1
+ mic-det-gpio:
+ maxItems: 1
+
+ port:
+ description: single OF-Graph subnode
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+ prefix:
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ patternProperties:
+ "^endpoint(@[0-9a-f]+)?":
+ type: object
+ properties:
+ remote-endpoint:
+ maxItems: 1
+ mclk-fs:
+ description: |
+ Multiplication factor between stream rate and codec mclk.
+ When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ frame-inversion:
+ description: dai-link uses frame clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ bitclock-inversion:
+ description: dai-link uses bit clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ frame-master:
+ description: Indicates dai-link frame master.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ bitclock-master:
+ description: Indicates dai-link bit clock master
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ dai-format:
+ description: audio format.
+ items:
+ enum:
+ - i2s
+ - right_j
+ - left_j
+ - dsp_a
+ - dsp_b
+ - ac97
+ - pdm
+ - msb
+ - lsb
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ required:
+ - remote-endpoint
+
+ ports:
+ description: multi OF-Graph subnode
+ type: object
+ patternProperties:
+ "^port(@[0-9a-f]+)?":
+ $ref: "#/properties/port"
+
+required:
+ - compatible
+ - dais
+
+additionalProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "audio-graph-card";
+
+ dais = <&cpu_port_a>;
+ };
+
+ cpu {
+ /*
+ * dai-controller own settings
+ */
+
+ port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ dai-format = "left_j";
+ };
+ };
+ };
+
+ codec {
+ /*
+ * codec own settings
+ */
+
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+ };