diff mbox series

[4/4] arm64: dts: ti: k3-am654-base-board: Fix up un-necessary status set to "okay" for USB

Message ID 20201104224356.18040-5-nm@ti.com
State Accepted
Commit 90e6c38848f8e86047e0e758c0725b155e2e349b
Headers show
Series [1/4] arm64: dts: ti: k3-am65*: Cleanup disabled nodes at SoC dtsi level | expand

Commit Message

Nishanth Menon Nov. 4, 2020, 10:43 p.m. UTC 
The default state of a device tree node is "okay". There is no specific
use of explicitly adding status = "okay" in the board dts.

Fixes: 7e7e7dd51d06 ("arm64: dts: ti: k3-am654-base-board: enable USB1")
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 --------
 1 file changed, 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 199c4d4e7539..744efcbb4f7f 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -325,14 +325,6 @@  &sdhci1 {
 	disable-wp;
 };
 
-&dwc3_1 {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins_default>;