diff mbox series

[v1,20/30] usb: chipidea: tegra: Support OPP and SoC core voltage scaling

Message ID 20201104234427.26477-21-digetx@gmail.com
State New
Headers show
Series [v1,01/30] dt-bindings: host1x: Document OPP and voltage regulator properties | expand

Commit Message

Dmitry Osipenko Nov. 4, 2020, 11:44 p.m. UTC
Add initial OPP and SoC CORE voltage scaling support to the Tegra UDC
driver. This is required for enabling system-wide DVFS on older Tegra
SoCs.

Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/usb/chipidea/Kconfig         |  1 +
 drivers/usb/chipidea/ci_hdrc_tegra.c | 79 ++++++++++++++++++++++++++++
 2 files changed, 80 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig
index 8bafcfc6080d..6a5bc08711d6 100644
--- a/drivers/usb/chipidea/Kconfig
+++ b/drivers/usb/chipidea/Kconfig
@@ -56,6 +56,7 @@  config USB_CHIPIDEA_TEGRA
 	tristate "Enable Tegra UDC glue driver" if EMBEDDED
 	depends on OF
 	depends on USB_CHIPIDEA_UDC
+	select PM_OPP
 	default USB_CHIPIDEA
 
 endif
diff --git a/drivers/usb/chipidea/ci_hdrc_tegra.c b/drivers/usb/chipidea/ci_hdrc_tegra.c
index 7455df0ede49..7f0403e810fe 100644
--- a/drivers/usb/chipidea/ci_hdrc_tegra.c
+++ b/drivers/usb/chipidea/ci_hdrc_tegra.c
@@ -6,6 +6,7 @@ 
 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/pm_opp.h>
 #include <linux/reset.h>
 
 #include <linux/usb/chipidea.h>
@@ -47,6 +48,79 @@  static const struct of_device_id tegra_udc_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, tegra_udc_of_match);
 
+static void tegra_udc_deinit_opp_table(void *data)
+{
+	struct device *dev = data;
+	struct opp_table *opp_table;
+
+	opp_table = dev_pm_opp_get_opp_table(dev);
+	dev_pm_opp_of_remove_table(dev);
+	dev_pm_opp_put_regulators(opp_table);
+	dev_pm_opp_put_opp_table(opp_table);
+}
+
+static int devm_tegra_udc_init_opp_table(struct device *dev)
+{
+	unsigned long rate = ULONG_MAX;
+	struct opp_table *opp_table;
+	const char *rname = "core";
+	struct dev_pm_opp *opp;
+	int err;
+
+	/* legacy device-trees don't have OPP table */
+	if (!device_property_present(dev, "operating-points-v2"))
+		return 0;
+
+	/* voltage scaling is optional */
+	if (device_property_present(dev, "core-supply"))
+		opp_table = dev_pm_opp_set_regulators(dev, &rname, 1);
+	else
+		opp_table = dev_pm_opp_get_opp_table(dev);
+
+	if (IS_ERR(opp_table))
+		return dev_err_probe(dev, PTR_ERR(opp_table),
+				     "failed to prepare OPP table\n");
+
+	err = dev_pm_opp_of_add_table(dev);
+	if (err) {
+		dev_err(dev, "failed to add OPP table: %d\n", err);
+		goto put_table;
+	}
+
+	/* find suitable OPP for the maximum clock rate */
+	opp = dev_pm_opp_find_freq_floor(dev, &rate);
+	err = PTR_ERR_OR_ZERO(opp);
+	if (err) {
+		dev_err(dev, "failed to get OPP: %d\n", err);
+		goto remove_table;
+	}
+
+	dev_pm_opp_put(opp);
+
+	/*
+	 * First dummy rate-set initializes voltage vote by setting voltage
+	 * in accordance to the clock rate.
+	 */
+	err = dev_pm_opp_set_rate(dev, rate);
+	if (err) {
+		dev_err(dev, "failed to initialize OPP clock: %d\n", err);
+		goto remove_table;
+	}
+
+	err = devm_add_action(dev, tegra_udc_deinit_opp_table, dev);
+	if (err)
+		goto remove_table;
+
+	return 0;
+
+remove_table:
+	dev_pm_opp_of_remove_table(dev);
+put_table:
+	dev_pm_opp_put_regulators(opp_table);
+
+	return err;
+}
+
 static int tegra_udc_probe(struct platform_device *pdev)
 {
 	const struct tegra_udc_soc_info *soc;
@@ -77,6 +151,11 @@  static int tegra_udc_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	err = devm_tegra_udc_init_opp_table(&pdev->dev);
+	if (err)
+		return dev_err_probe(&pdev->dev, err,
+				     "failed to initialize OPP\n");
+
 	err = clk_prepare_enable(udc->clk);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to enable clock: %d\n", err);