| Message ID | 1604511921-24840-1-git-send-email-periyasa@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | ath11k: Fix the hal descriptor mask | expand |
Karthikeyan Periyasamy <periyasa@codeaurora.org> wrote: > Below listed hal descriptor mask are incorrect, so modify it to correct one > - CE destination status description meta info mask is increased from > 8 bits to 16 bits from the 0th bit position > - Rx Reo queue duplicate count mask is decreased from 22 bits to 16 bits > - Reo threshold status counter sum mask is increased from 24 bits to 26 bits > > No functionality impact, these descriptors are currently not used in any > supported platform. But in future if someone referred these descriptor then > ended with wrong values. > > Found this during code review. > > Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 > > Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> > Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Patch applied to ath-next branch of ath.git, thanks. ab041d060ee6 ath11k: Fix the hal descriptor mask -- https://patchwork.kernel.org/project/linux-wireless/patch/1604511921-24840-1-git-send-email-periyasa@codeaurora.org/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
diff --git a/drivers/net/wireless/ath/ath11k/hal_desc.h b/drivers/net/wireless/ath/ath11k/hal_desc.h index ceebdc2..1b713cb 100644 --- a/drivers/net/wireless/ath/ath11k/hal_desc.h +++ b/drivers/net/wireless/ath/ath11k/hal_desc.h @@ -1425,7 +1425,7 @@ struct hal_ce_srng_dest_desc { #define HAL_CE_DST_STATUS_DESC_FLAGS_GATHER BIT(11) #define HAL_CE_DST_STATUS_DESC_FLAGS_LEN GENMASK(31, 16) -#define HAL_CE_DST_STATUS_DESC_META_INFO_DATA GENMASK(7, 0) +#define HAL_CE_DST_STATUS_DESC_META_INFO_DATA GENMASK(15, 0) #define HAL_CE_DST_STATUS_DESC_META_INFO_RING_ID GENMASK(27, 20) #define HAL_CE_DST_STATUS_DESC_META_INFO_LOOP_CNT HAL_SRNG_DESC_LOOP_CNT @@ -1946,7 +1946,7 @@ enum hal_rx_reo_queue_pn_size { #define HAL_RX_REO_QUEUE_INFO3_TIMEOUT_COUNT GENMASK(9, 4) #define HAL_RX_REO_QUEUE_INFO3_FWD_DUE_TO_BAR_CNT GENMASK(15, 10) -#define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT GENMASK(31, 10) +#define HAL_RX_REO_QUEUE_INFO3_DUPLICATE_COUNT GENMASK(31, 16) #define HAL_RX_REO_QUEUE_INFO4_FRAME_IN_ORD_COUNT GENMASK(23, 0) #define HAL_RX_REO_QUEUE_INFO4_BAR_RECVD_COUNT GENMASK(31, 24) @@ -2432,7 +2432,7 @@ struct hal_reo_flush_timeout_list_status { #define HAL_REO_DESC_THRESH_STATUS_INFO1_LINK_DESC_COUNTER0 GENMASK(23, 0) #define HAL_REO_DESC_THRESH_STATUS_INFO2_LINK_DESC_COUNTER1 GENMASK(23, 0) #define HAL_REO_DESC_THRESH_STATUS_INFO3_LINK_DESC_COUNTER2 GENMASK(23, 0) -#define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM GENMASK(23, 0) +#define HAL_REO_DESC_THRESH_STATUS_INFO4_LINK_DESC_COUNTER_SUM GENMASK(25, 0) struct hal_reo_desc_thresh_reached_status { struct hal_reo_status_hdr hdr;
Below listed hal descriptor mask are incorrect, so modify it to correct one - CE destination status description meta info mask is increased from 8 bits to 16 bits from the 0th bit position - Rx Reo queue duplicate count mask is decreased from 22 bits to 16 bits - Reo threshold status counter sum mask is increased from 24 bits to 26 bits No functionality impact, these descriptors are currently not used in any supported platform. But in future if someone referred these descriptor then ended with wrong values. Found this during code review. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> --- drivers/net/wireless/ath/ath11k/hal_desc.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)