diff mbox series

[v1,1/4] bus: mhi: core: Allow receiving a STOP channel command response

Message ID 1604961850-27671-2-git-send-email-bbhatt@codeaurora.org
State New
Headers show
Series [v1,1/4] bus: mhi: core: Allow receiving a STOP channel command response | expand

Commit Message

Bhaumik Bhatt Nov. 9, 2020, 10:44 p.m. UTC 
Add support to receive the response to a STOP channel command to the
MHI bus. If a client would like to STOP a channel instead of issuing
a RESET to it, this would provide support for it.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/init.c | 5 +++--
 drivers/bus/mhi/core/main.c | 5 +++++
 2 files changed, 8 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 8cefa35..4d34d62 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -1267,8 +1267,9 @@  static int mhi_driver_remove(struct device *dev)
 
 		mutex_lock(&mhi_chan->mutex);
 
-		if (ch_state[dir] == MHI_CH_STATE_ENABLED &&
-		    !mhi_chan->offload_ch)
+		if ((ch_state[dir] == MHI_CH_STATE_ENABLED ||
+		     ch_state[dir] == MHI_CH_STATE_STOP) &&
+		     !mhi_chan->offload_ch)
 			mhi_deinit_chan_ctxt(mhi_cntrl, mhi_chan);
 
 		mhi_chan->ch_state = MHI_CH_STATE_DISABLED;
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index f953e2a..ad881a1 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -1194,6 +1194,11 @@  int mhi_send_cmd(struct mhi_controller *mhi_cntrl,
 		cmd_tre->dword[0] = MHI_TRE_CMD_RESET_DWORD0;
 		cmd_tre->dword[1] = MHI_TRE_CMD_RESET_DWORD1(chan);
 		break;
+	case MHI_CMD_STOP_CHAN:
+		cmd_tre->ptr = MHI_TRE_CMD_STOP_PTR;
+		cmd_tre->dword[0] = MHI_TRE_CMD_STOP_DWORD0;
+		cmd_tre->dword[1] = MHI_TRE_CMD_STOP_DWORD1(chan);
+		break;
 	case MHI_CMD_START_CHAN:
 		cmd_tre->ptr = MHI_TRE_CMD_START_PTR;
 		cmd_tre->dword[0] = MHI_TRE_CMD_START_DWORD0;