| Message ID | 1604687907-25712-1-git-send-email-tdas@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v1] arm64: dts: sc7180: Add camera clock controller node | expand |
On Fri 06 Nov 12:38 CST 2020, Taniya Das wrote: > Add the camera clock controller node supported on SC7180. > > Signed-off-by: Taniya Das <tdas@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index f5ef2cb..e795dba 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -5,6 +5,7 @@ > * Copyright (c) 2019, The Linux Foundation. All rights reserved. > */ > > +#include <dt-bindings/clock/qcom,camcc-sc7180.h> Applied the patch without this include, as it was not available in the tag I branched off my 5.11 branch off. Regards, Bjorn > #include <dt-bindings/clock/qcom,dispcc-sc7180.h> > #include <dt-bindings/clock/qcom,gcc-sc7180.h> > #include <dt-bindings/clock/qcom,gpucc-sc7180.h> > @@ -2896,6 +2897,18 @@ > qcom,bcm-voters = <&apps_bcm_voter>; > }; > > + camcc: clock-controller@ad00000 { > + compatible = "qcom,sc7180-camcc"; > + reg = <0 0x0ad00000 0 0x10000>; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&gcc GCC_CAMERA_AHB_CLK>, > + <&gcc GCC_CAMERA_XO_CLK>; > + clock-names = "bi_tcxo", "iface", "xo"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > mdss: mdss@ae00000 { > compatible = "qcom,sc7180-mdss"; > reg = <0 0x0ae00000 0 0x1000>; > -- > Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member > of the Code Aurora Forum, hosted by the Linux Foundation. >
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index f5ef2cb..e795dba 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -5,6 +5,7 @@ * Copyright (c) 2019, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,camcc-sc7180.h> #include <dt-bindings/clock/qcom,dispcc-sc7180.h> #include <dt-bindings/clock/qcom,gcc-sc7180.h> #include <dt-bindings/clock/qcom,gpucc-sc7180.h> @@ -2896,6 +2897,18 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sc7180-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_XO_CLK>; + clock-names = "bi_tcxo", "iface", "xo"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sc7180-mdss"; reg = <0 0x0ae00000 0 0x1000>;
Add the camera clock controller node supported on SC7180. Signed-off-by: Taniya Das <tdas@codeaurora.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) -- Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member of the Code Aurora Forum, hosted by the Linux Foundation.