| Message ID | 1403103172-19856-3-git-send-email-lee.jones@linaro.org |
|---|---|
| State | New |
| Headers | show |
Hi Lee, minor remark below.. On 18 June 2014 16:52, Lee Jones <lee.jones@linaro.org> wrote: > Supply top level nodes for the STiH416 based development boards. > The Pinctrl configuration has already been applied, so the only > missing piece of the DT puzzle is for a board's DTB to enable > the nodes. > > Signed-off-by: Lee Jones <lee.jones@linaro.org> > --- > arch/arm/boot/dts/stih416.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 40 insertions(+) > > diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi > index 06473c5..8af159e 100644 > --- a/arch/arm/boot/dts/stih416.dtsi > +++ b/arch/arm/boot/dts/stih416.dtsi > @@ -236,5 +236,45 @@ > resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, > <&softreset STIH416_KEYSCAN_SOFTRESET>; > }; > + > + /* SAS PWM Module */ > + pwm0: pwm@fed10000 { > + compatible = "st,sti-pwm"; > + status = "disabled"; > + #pwm-cells = <2>; > + reg = <0xfed10000 0x68>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_chan0_default del space > + &pinctrl_pwm0_chan1_default > + &pinctrl_pwm0_chan2_default > + &pinctrl_pwm0_chan3_default>; > + > + clock-names = "pwm"; > + clocks = <&clk_sysin>; > + }; > + > + /* SBC PWM Module */ > + pwm1: pwm@fe510000 { > + compatible = "st,sti-pwm"; > + status = "disabled"; > + #pwm-cells = <2>; > + reg = <0xfe510000 0x68>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm1_chan0_default > + /* > + * Shared with SBC_OBS_NOTRST. Don't > + * enable unless you really know what > + * you're doing. > + * > + * &pinctrl_pwm1_chan1_default > + */ > + &pinctrl_pwm1_chan2_default > + &pinctrl_pwm1_chan3_default>; > + > + clock-names = "pwm"; > + clocks = <&clk_sysin>; > + }; > }; > }; > -- > 1.8.3.2 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
On Wed, 18 Jun 2014, Gabriel Fernandez wrote: > Hi Lee, > minor remark below.. > > On 18 June 2014 16:52, Lee Jones <lee.jones@linaro.org> wrote: > > Supply top level nodes for the STiH416 based development boards. > > The Pinctrl configuration has already been applied, so the only > > missing piece of the DT puzzle is for a board's DTB to enable > > the nodes. > > > > Signed-off-by: Lee Jones <lee.jones@linaro.org> > > --- > > arch/arm/boot/dts/stih416.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ > > 1 file changed, 40 insertions(+) > > > > diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi > > index 06473c5..8af159e 100644 > > --- a/arch/arm/boot/dts/stih416.dtsi > > +++ b/arch/arm/boot/dts/stih416.dtsi > > @@ -236,5 +236,45 @@ > > resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, > > <&softreset STIH416_KEYSCAN_SOFTRESET>; > > }; > > + > > + /* SAS PWM Module */ > > + pwm0: pwm@fed10000 { > > + compatible = "st,sti-pwm"; > > + status = "disabled"; > > + #pwm-cells = <2>; > > + reg = <0xfed10000 0x68>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_pwm0_chan0_default > del space Thanks. > > + &pinctrl_pwm0_chan1_default > > + &pinctrl_pwm0_chan2_default > > + &pinctrl_pwm0_chan3_default>; > > + > > + clock-names = "pwm"; > > + clocks = <&clk_sysin>; > > + }; > > + > > + /* SBC PWM Module */ > > + pwm1: pwm@fe510000 { > > + compatible = "st,sti-pwm"; > > + status = "disabled"; > > + #pwm-cells = <2>; > > + reg = <0xfe510000 0x68>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_pwm1_chan0_default > > + /* > > + * Shared with SBC_OBS_NOTRST. Don't > > + * enable unless you really know what > > + * you're doing. > > + * > > + * &pinctrl_pwm1_chan1_default > > + */ > > + &pinctrl_pwm1_chan2_default > > + &pinctrl_pwm1_chan3_default>; > > + > > + clock-names = "pwm"; > > + clocks = <&clk_sysin>; > > + }; > > }; > > }; > > > > > > _______________________________________________ > > linux-arm-kernel mailing list > > linux-arm-kernel@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 06473c5..8af159e 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -236,5 +236,45 @@ resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, <&softreset STIH416_KEYSCAN_SOFTRESET>; }; + + /* SAS PWM Module */ + pwm0: pwm@fed10000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfed10000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default + &pinctrl_pwm0_chan1_default + &pinctrl_pwm0_chan2_default + &pinctrl_pwm0_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + }; + + /* SBC PWM Module */ + pwm1: pwm@fe510000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfe510000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + /* + * Shared with SBC_OBS_NOTRST. Don't + * enable unless you really know what + * you're doing. + * + * &pinctrl_pwm1_chan1_default + */ + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + }; }; };
Supply top level nodes for the STiH416 based development boards. The Pinctrl configuration has already been applied, so the only missing piece of the DT puzzle is for a board's DTB to enable the nodes. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/stih416.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)