diff mbox series

[net-next] net: phy: don't duplicate driver name in phy_attached_print

Message ID 8ab72586-f079-41d8-84ee-9f6a5bd97b2a@gmail.com
State New
Headers show
Series [net-next] net: phy: don't duplicate driver name in phy_attached_print | expand

Commit Message

Heiner Kallweit Nov. 15, 2020, 3:03 p.m. UTC
Currently we print the driver name twice in phy_attached_print():
- phy_dev_info() prints it as part of the device info
- and we print it as part of the info string

This is a little bit ugly, it makes the info harder to read,
especially if the driver name is a little bit longer.
Therefore omit the driver name (if set) in the info string.

Example from r8169 that uses phylib:

old: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \
   [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
new: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \
   (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/phy_device.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

Comments

Jakub Kicinski Nov. 17, 2020, 6:35 p.m. UTC | #1
On Tue, 17 Nov 2020 03:53:54 +0100 Andrew Lunn wrote:
> On Sun, Nov 15, 2020 at 04:03:10PM +0100, Heiner Kallweit wrote:

> > Currently we print the driver name twice in phy_attached_print():

> > - phy_dev_info() prints it as part of the device info

> > - and we print it as part of the info string

> > 

> > This is a little bit ugly, it makes the info harder to read,

> > especially if the driver name is a little bit longer.

> > Therefore omit the driver name (if set) in the info string.

> > 

> > Example from r8169 that uses phylib:

> > 

> > old: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \

> >    [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)

> > new: Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver \

> >    (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)

> > 

> > Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>  

> 

> Reviewed-by: Andrew Lunn <andrew@lunn.ch>


Applied, thanks!
diff mbox series

Patch

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e13a46c25..04652603a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1156,7 +1156,7 @@  void phy_attached_info(struct phy_device *phydev)
 }
 EXPORT_SYMBOL(phy_attached_info);
 
-#define ATTACHED_FMT "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%s)"
+#define ATTACHED_FMT "attached PHY driver %s(mii_bus:phy_addr=%s, irq=%s)"
 char *phy_attached_info_irq(struct phy_device *phydev)
 {
 	char *irq_str;
@@ -1181,19 +1181,17 @@  EXPORT_SYMBOL(phy_attached_info_irq);
 
 void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
 {
-	const char *drv_name = phydev->drv ? phydev->drv->name : "unbound";
+	const char *unbound = phydev->drv ? "" : "[unbound] ";
 	char *irq_str = phy_attached_info_irq(phydev);
 
 	if (!fmt) {
-		phydev_info(phydev, ATTACHED_FMT "\n",
-			 drv_name, phydev_name(phydev),
-			 irq_str);
+		phydev_info(phydev, ATTACHED_FMT "\n", unbound,
+			    phydev_name(phydev), irq_str);
 	} else {
 		va_list ap;
 
-		phydev_info(phydev, ATTACHED_FMT,
-			 drv_name, phydev_name(phydev),
-			 irq_str);
+		phydev_info(phydev, ATTACHED_FMT, unbound,
+			    phydev_name(phydev), irq_str);
 
 		va_start(ap, fmt);
 		vprintk(fmt, ap);