| Message ID | 1605703943-25980-1-git-send-email-gubbaven@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | [v2] Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC | expand |
On Wed 18 Nov 06:52 CST 2020, Venkata Lakshmi Narayana Gubba wrote: > Add support to read FW build version for WCN3991 BTSoC Your commit message doesn't describe why you need/want this? Is it somehow required for BT to come up or is it simply 57 lines of code to print a line of build info in the kernel log? Note that most people reading the kernel log won't care about what firmware version their BT chip is running, so if it's only for your own debugging purpose I would prefer if you make this available in sysfs or debugfs. Regards, Bjorn > > Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> > --- > drivers/bluetooth/btqca.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++ > drivers/bluetooth/btqca.h | 3 +++ > 2 files changed, 60 insertions(+) > > diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c > index ce9dcff..dfd7ff7 100644 > --- a/drivers/bluetooth/btqca.c > +++ b/drivers/bluetooth/btqca.c > @@ -101,6 +101,56 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version, > } > EXPORT_SYMBOL_GPL(qca_read_soc_version); > > +static int qca_read_fw_build_info(struct hci_dev *hdev) > +{ > + struct sk_buff *skb; > + struct edl_event_hdr *edl; > + char cmd; > + int err = 0; > + char build_label[QCA_FW_BUILD_VER_LEN]; > + int build_lbl_len; > + > + bt_dev_dbg(hdev, "QCA read fw build info"); > + > + cmd = EDL_GET_BUILD_INFO_CMD; > + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN, > + &cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT); > + if (IS_ERR(skb)) { > + err = PTR_ERR(skb); > + bt_dev_err(hdev, "Reading QCA fw build info failed (%d)", > + err); > + return err; > + } > + > + edl = (struct edl_event_hdr *)(skb->data); > + if (!edl) { > + bt_dev_err(hdev, "QCA read fw build info with no header"); > + err = -EILSEQ; > + goto out; > + } > + > + if (edl->cresp != EDL_CMD_REQ_RES_EVT || > + edl->rtype != EDL_GET_BUILD_INFO_CMD) { > + bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp, > + edl->rtype); > + err = -EIO; > + goto out; > + } > + > + build_lbl_len = edl->data[0]; > + memcpy(build_label, &edl->data[1], build_lbl_len); > + *(build_label + build_lbl_len) = '\0'; > + > + bt_dev_info(hdev, "BT SoC FW Build info: %s", build_label); > + > +out: > + kfree_skb(skb); > + if (err) > + bt_dev_err(hdev, "QCA read fw build info failed (%d)", err); > + > + return err; > +} > + > static int qca_send_reset(struct hci_dev *hdev) > { > struct sk_buff *skb; > @@ -520,6 +570,13 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, > return err; > } > > + if (soc_type == QCA_WCN3991) { > + /* get fw build info */ > + err = qca_read_fw_build_info(hdev); > + if (err < 0) > + return err; > + } > + > bt_dev_info(hdev, "QCA setup on UART is completed"); > > return 0; > diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h > index d81b74c..375c7fc 100644 > --- a/drivers/bluetooth/btqca.h > +++ b/drivers/bluetooth/btqca.h > @@ -11,6 +11,7 @@ > #define EDL_PATCH_CMD_LEN (1) > #define EDL_PATCH_VER_REQ_CMD (0x19) > #define EDL_PATCH_TLV_REQ_CMD (0x1E) > +#define EDL_GET_BUILD_INFO_CMD (0x20) > #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01) > #define MAX_SIZE_PER_TLV_SEGMENT (243) > #define QCA_PRE_SHUTDOWN_CMD (0xFC08) > @@ -34,6 +35,8 @@ > #define QCA_HCI_CC_OPCODE 0xFC00 > #define QCA_HCI_CC_SUCCESS 0x00 > > +#define QCA_FW_BUILD_VER_LEN 255 > + > enum qca_baudrate { > QCA_BAUDRATE_115200 = 0, > QCA_BAUDRATE_57600, > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
Hi Venkata, > Add support to read FW build version for WCN3991 BTSoC > > Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> > --- > drivers/bluetooth/btqca.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++ > drivers/bluetooth/btqca.h | 3 +++ > 2 files changed, 60 insertions(+) please send a version that applies cleanly against bluetooth-next. Regards Marcel
diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c index ce9dcff..dfd7ff7 100644 --- a/drivers/bluetooth/btqca.c +++ b/drivers/bluetooth/btqca.c @@ -101,6 +101,56 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version, } EXPORT_SYMBOL_GPL(qca_read_soc_version); +static int qca_read_fw_build_info(struct hci_dev *hdev) +{ + struct sk_buff *skb; + struct edl_event_hdr *edl; + char cmd; + int err = 0; + char build_label[QCA_FW_BUILD_VER_LEN]; + int build_lbl_len; + + bt_dev_dbg(hdev, "QCA read fw build info"); + + cmd = EDL_GET_BUILD_INFO_CMD; + skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, EDL_PATCH_CMD_LEN, + &cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT); + if (IS_ERR(skb)) { + err = PTR_ERR(skb); + bt_dev_err(hdev, "Reading QCA fw build info failed (%d)", + err); + return err; + } + + edl = (struct edl_event_hdr *)(skb->data); + if (!edl) { + bt_dev_err(hdev, "QCA read fw build info with no header"); + err = -EILSEQ; + goto out; + } + + if (edl->cresp != EDL_CMD_REQ_RES_EVT || + edl->rtype != EDL_GET_BUILD_INFO_CMD) { + bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp, + edl->rtype); + err = -EIO; + goto out; + } + + build_lbl_len = edl->data[0]; + memcpy(build_label, &edl->data[1], build_lbl_len); + *(build_label + build_lbl_len) = '\0'; + + bt_dev_info(hdev, "BT SoC FW Build info: %s", build_label); + +out: + kfree_skb(skb); + if (err) + bt_dev_err(hdev, "QCA read fw build info failed (%d)", err); + + return err; +} + static int qca_send_reset(struct hci_dev *hdev) { struct sk_buff *skb; @@ -520,6 +570,13 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate, return err; } + if (soc_type == QCA_WCN3991) { + /* get fw build info */ + err = qca_read_fw_build_info(hdev); + if (err < 0) + return err; + } + bt_dev_info(hdev, "QCA setup on UART is completed"); return 0; diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h index d81b74c..375c7fc 100644 --- a/drivers/bluetooth/btqca.h +++ b/drivers/bluetooth/btqca.h @@ -11,6 +11,7 @@ #define EDL_PATCH_CMD_LEN (1) #define EDL_PATCH_VER_REQ_CMD (0x19) #define EDL_PATCH_TLV_REQ_CMD (0x1E) +#define EDL_GET_BUILD_INFO_CMD (0x20) #define EDL_NVM_ACCESS_SET_REQ_CMD (0x01) #define MAX_SIZE_PER_TLV_SEGMENT (243) #define QCA_PRE_SHUTDOWN_CMD (0xFC08) @@ -34,6 +35,8 @@ #define QCA_HCI_CC_OPCODE 0xFC00 #define QCA_HCI_CC_SUCCESS 0x00 +#define QCA_FW_BUILD_VER_LEN 255 + enum qca_baudrate { QCA_BAUDRATE_115200 = 0, QCA_BAUDRATE_57600,
Add support to read FW build version for WCN3991 BTSoC Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> --- drivers/bluetooth/btqca.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/bluetooth/btqca.h | 3 +++ 2 files changed, 60 insertions(+)