diff mbox series

arm64: tegra: Fix Tegra234 VDK node names

Message ID 20201118160458.659517-1-jonathanh@nvidia.com
State Accepted
Commit d98bccf10dd0f36cabee71a425381fce0908de3b
Headers show
Series arm64: tegra: Fix Tegra234 VDK node names | expand

Commit Message

Jon Hunter Nov. 18, 2020, 4:04 p.m. UTC
When the device-tree board file was added for the Tegra234 VDK simulator
it incorrectly used the names 'cbb' and 'sdhci' instead of 'bus' and
'mmc', respectively. The names 'bus' and 'mmc' are required by the
device-tree json-schema validation tools. Therefore, fix this by
renaming these nodes accordingly.

Fixes: 639448912ba1 ("arm64: tegra: Initial Tegra234 VDK support")

Reported-by: Ashish Singhal <ashishsingha@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Thierry Reding Nov. 19, 2020, 10:42 a.m. UTC | #1
On Wed, Nov 18, 2020 at 04:04:58PM +0000, Jon Hunter wrote:
> When the device-tree board file was added for the Tegra234 VDK simulator
> it incorrectly used the names 'cbb' and 'sdhci' instead of 'bus' and
> 'mmc', respectively. The names 'bus' and 'mmc' are required by the
> device-tree json-schema validation tools. Therefore, fix this by
> renaming these nodes accordingly.
> 
> Fixes: 639448912ba1 ("arm64: tegra: Initial Tegra234 VDK support")
> 
> Reported-by: Ashish Singhal <ashishsingha@nvidia.com>
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> ---
>  arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

Thierry
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
index f6e6a24829af..b5d9a5526272 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-sim-vdk.dts
@@ -8,7 +8,7 @@  / {
 	compatible = "nvidia,tegra234-vdk", "nvidia,tegra234";
 
 	aliases {
-		sdhci3 = "/cbb@0/sdhci@3460000";
+		mmc3 = "/bus@0/mmc@3460000";
 		serial0 = &uarta;
 	};
 
@@ -17,12 +17,12 @@  chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	cbb@0 {
+	bus@0 {
 		serial@3100000 {
 			status = "okay";
 		};
 
-		sdhci@3460000 {
+		mmc@3460000 {
 			status = "okay";
 			bus-width = <8>;
 			non-removable;