diff mbox series

drm/omap: sdi: fix bridge enable/disable

Message ID 20201127085241.848461-1-tomi.valkeinen@ti.com
State New
Headers show
Series drm/omap: sdi: fix bridge enable/disable | expand

Commit Message

Tomi Valkeinen Nov. 27, 2020, 8:52 a.m. UTC
When the SDI output was converted to DRM bridge, the atomic versions of
enable and disable funcs were used. This was not intended, as that would
require implementing other atomic funcs too. This leads to:

WARNING: CPU: 0 PID: 18 at drivers/gpu/drm/drm_bridge.c:708 drm_atomic_helper_commit_modeset_enables+0x134/0x268

and display not working.

Fix this by using the legacy enable/disable funcs.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Fixes: 8bef8a6d5da81b909a190822b96805a47348146f ("drm/omap: sdi: Register a drm_bridge")
Cc: stable@vger.kernel.org # v5.7+
Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
---
 drivers/gpu/drm/omapdrm/dss/sdi.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

Comments

Aaro Koskinen Nov. 28, 2020, 5:45 p.m. UTC | #1
Hi,

On Fri, Nov 27, 2020 at 10:52:41AM +0200, Tomi Valkeinen wrote:
> When the SDI output was converted to DRM bridge, the atomic versions of

> enable and disable funcs were used. This was not intended, as that would

> require implementing other atomic funcs too. This leads to:

> 

> WARNING: CPU: 0 PID: 18 at drivers/gpu/drm/drm_bridge.c:708 drm_atomic_helper_commit_modeset_enables+0x134/0x268

> 

> and display not working.

> 

> Fix this by using the legacy enable/disable funcs.

> 

> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>

> Fixes: 8bef8a6d5da81b909a190822b96805a47348146f ("drm/omap: sdi: Register a drm_bridge")

> Cc: stable@vger.kernel.org # v5.7+

> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>


Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>


Thanks,

A.

> ---

>  drivers/gpu/drm/omapdrm/dss/sdi.c | 10 ++++------

>  1 file changed, 4 insertions(+), 6 deletions(-)

> 

> diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c

> index 033fd30074b0..282e4c837cd9 100644

> --- a/drivers/gpu/drm/omapdrm/dss/sdi.c

> +++ b/drivers/gpu/drm/omapdrm/dss/sdi.c

> @@ -195,8 +195,7 @@ static void sdi_bridge_mode_set(struct drm_bridge *bridge,

>  	sdi->pixelclock = adjusted_mode->clock * 1000;

>  }

>  

> -static void sdi_bridge_enable(struct drm_bridge *bridge,

> -			      struct drm_bridge_state *bridge_state)

> +static void sdi_bridge_enable(struct drm_bridge *bridge)

>  {

>  	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);

>  	struct dispc_clock_info dispc_cinfo;

> @@ -259,8 +258,7 @@ static void sdi_bridge_enable(struct drm_bridge *bridge,

>  	regulator_disable(sdi->vdds_sdi_reg);

>  }

>  

> -static void sdi_bridge_disable(struct drm_bridge *bridge,

> -			       struct drm_bridge_state *bridge_state)

> +static void sdi_bridge_disable(struct drm_bridge *bridge)

>  {

>  	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);

>  

> @@ -278,8 +276,8 @@ static const struct drm_bridge_funcs sdi_bridge_funcs = {

>  	.mode_valid = sdi_bridge_mode_valid,

>  	.mode_fixup = sdi_bridge_mode_fixup,

>  	.mode_set = sdi_bridge_mode_set,

> -	.atomic_enable = sdi_bridge_enable,

> -	.atomic_disable = sdi_bridge_disable,

> +	.enable = sdi_bridge_enable,

> +	.disable = sdi_bridge_disable,

>  };

>  

>  static void sdi_bridge_init(struct sdi_device *sdi)

> -- 

> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.

> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

>
Laurent Pinchart Nov. 28, 2020, 10:02 p.m. UTC | #2
Hi Tomi,

Thank you for the patch.

On Fri, Nov 27, 2020 at 10:52:41AM +0200, Tomi Valkeinen wrote:
> When the SDI output was converted to DRM bridge, the atomic versions of
> enable and disable funcs were used. This was not intended, as that would
> require implementing other atomic funcs too. This leads to:
> 
> WARNING: CPU: 0 PID: 18 at drivers/gpu/drm/drm_bridge.c:708 drm_atomic_helper_commit_modeset_enables+0x134/0x268
> 
> and display not working.
> 
> Fix this by using the legacy enable/disable funcs.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
> Fixes: 8bef8a6d5da81b909a190822b96805a47348146f ("drm/omap: sdi: Register a drm_bridge")
> Cc: stable@vger.kernel.org # v5.7+
> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/omapdrm/dss/sdi.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
> index 033fd30074b0..282e4c837cd9 100644
> --- a/drivers/gpu/drm/omapdrm/dss/sdi.c
> +++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
> @@ -195,8 +195,7 @@ static void sdi_bridge_mode_set(struct drm_bridge *bridge,
>  	sdi->pixelclock = adjusted_mode->clock * 1000;
>  }
>  
> -static void sdi_bridge_enable(struct drm_bridge *bridge,
> -			      struct drm_bridge_state *bridge_state)
> +static void sdi_bridge_enable(struct drm_bridge *bridge)
>  {
>  	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
>  	struct dispc_clock_info dispc_cinfo;
> @@ -259,8 +258,7 @@ static void sdi_bridge_enable(struct drm_bridge *bridge,
>  	regulator_disable(sdi->vdds_sdi_reg);
>  }
>  
> -static void sdi_bridge_disable(struct drm_bridge *bridge,
> -			       struct drm_bridge_state *bridge_state)
> +static void sdi_bridge_disable(struct drm_bridge *bridge)
>  {
>  	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
>  
> @@ -278,8 +276,8 @@ static const struct drm_bridge_funcs sdi_bridge_funcs = {
>  	.mode_valid = sdi_bridge_mode_valid,
>  	.mode_fixup = sdi_bridge_mode_fixup,
>  	.mode_set = sdi_bridge_mode_set,
> -	.atomic_enable = sdi_bridge_enable,
> -	.atomic_disable = sdi_bridge_disable,
> +	.enable = sdi_bridge_enable,
> +	.disable = sdi_bridge_disable,
>  };
>  
>  static void sdi_bridge_init(struct sdi_device *sdi)
Tomi Valkeinen Nov. 30, 2020, 9:31 a.m. UTC | #3
On 28/11/2020 19:45, Aaro Koskinen wrote:
> Hi,
> 
> On Fri, Nov 27, 2020 at 10:52:41AM +0200, Tomi Valkeinen wrote:
>> When the SDI output was converted to DRM bridge, the atomic versions of
>> enable and disable funcs were used. This was not intended, as that would
>> require implementing other atomic funcs too. This leads to:
>>
>> WARNING: CPU: 0 PID: 18 at drivers/gpu/drm/drm_bridge.c:708 drm_atomic_helper_commit_modeset_enables+0x134/0x268
>>
>> and display not working.
>>
>> Fix this by using the legacy enable/disable funcs.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
>> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
>> Fixes: 8bef8a6d5da81b909a190822b96805a47348146f ("drm/omap: sdi: Register a drm_bridge")
>> Cc: stable@vger.kernel.org # v5.7+
>> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
> 
> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>

Thanks! I pushed this to drm-misc-fixes. Hopefully with this and Sebastian's patch N900 display now
works.

 Tomi
diff mbox series

Patch

diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index 033fd30074b0..282e4c837cd9 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -195,8 +195,7 @@  static void sdi_bridge_mode_set(struct drm_bridge *bridge,
 	sdi->pixelclock = adjusted_mode->clock * 1000;
 }
 
-static void sdi_bridge_enable(struct drm_bridge *bridge,
-			      struct drm_bridge_state *bridge_state)
+static void sdi_bridge_enable(struct drm_bridge *bridge)
 {
 	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
 	struct dispc_clock_info dispc_cinfo;
@@ -259,8 +258,7 @@  static void sdi_bridge_enable(struct drm_bridge *bridge,
 	regulator_disable(sdi->vdds_sdi_reg);
 }
 
-static void sdi_bridge_disable(struct drm_bridge *bridge,
-			       struct drm_bridge_state *bridge_state)
+static void sdi_bridge_disable(struct drm_bridge *bridge)
 {
 	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
 
@@ -278,8 +276,8 @@  static const struct drm_bridge_funcs sdi_bridge_funcs = {
 	.mode_valid = sdi_bridge_mode_valid,
 	.mode_fixup = sdi_bridge_mode_fixup,
 	.mode_set = sdi_bridge_mode_set,
-	.atomic_enable = sdi_bridge_enable,
-	.atomic_disable = sdi_bridge_disable,
+	.enable = sdi_bridge_enable,
+	.disable = sdi_bridge_disable,
 };
 
 static void sdi_bridge_init(struct sdi_device *sdi)