diff mbox

[v2,04/11] ARM: stih416-b2020e: Enable PWM on the B2020 Rev-E

Message ID 1405348412-7352-5-git-send-email-lee.jones@linaro.org
State New
Headers show

Commit Message

Lee Jones July 14, 2014, 2:33 p.m. UTC
All the infrastructure is now in place for ST's PWM controller.  This
patch takes the final step and enables the IP on the 2020 Rev-E
development platform.

Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih416-b2020e.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts
index ba0fa2c..07cbf5b 100644
--- a/arch/arm/boot/dts/stih416-b2020e.dts
+++ b/arch/arm/boot/dts/stih416-b2020e.dts
@@ -31,5 +31,15 @@ 
 		ethernet1: dwmac@fef08000 {
 			snps,reset-gpio = <&PIO0 7>;
 		};
+
+		/* SAS PWM Module */
+		pwm0: pwm@fed10000 {
+			status		= "okay";
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@fe510000 {
+			status		= "okay";
+		};
 	};
 };