@@ -2085,12 +2085,6 @@ do { \
#define ASC_BUSY 0
#define ASC_ERROR (-1)
-/* struct scsi_cmnd function return codes */
-#define STATUS_BYTE(byte) (byte)
-#define MSG_BYTE(byte) ((byte) << 8)
-#define HOST_BYTE(byte) ((byte) << 16)
-#define DRIVER_BYTE(byte) ((byte) << 24)
-
#define ASC_STATS(shost, counter) ASC_STATS_ADD(shost, counter, 1)
#ifndef ADVANSYS_STATS
#define ASC_STATS_ADD(shost, counter, count)
@@ -6010,47 +6004,33 @@ static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp)
ASC_DBG(2, "QD_WITH_ERROR\n");
switch (scsiqp->host_status) {
case QHSTA_NO_ERROR:
+ scp->result = scsiqp->scsi_status;
if (scsiqp->scsi_status == SAM_STAT_CHECK_CONDITION) {
ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n");
ASC_DBG_PRT_SENSE(2, scp->sense_buffer,
SCSI_SENSE_BUFFERSIZE);
- /*
- * Note: The 'status_byte()' macro used by
- * target drivers defined in scsi.h shifts the
- * status byte returned by host drivers right
- * by 1 bit. This is why target drivers also
- * use right shifted status byte definitions.
- * For instance target drivers use
- * CHECK_CONDITION, defined to 0x1, instead of
- * the SCSI defined check condition value of
- * 0x2. Host drivers are supposed to return
- * the status byte as it is defined by SCSI.
- */
- scp->result = DRIVER_BYTE(DRIVER_SENSE) |
- STATUS_BYTE(scsiqp->scsi_status);
- } else {
- scp->result = STATUS_BYTE(scsiqp->scsi_status);
+ set_driver_byte(scp, DRIVER_SENSE);
}
break;
default:
/* Some other QHSTA error occurred. */
ASC_DBG(1, "host_status 0x%x\n", scsiqp->host_status);
- scp->result = HOST_BYTE(DID_BAD_TARGET);
+ set_host_byte(scp, DID_BAD_TARGET);
break;
}
break;
case QD_ABORTED_BY_HOST:
ASC_DBG(1, "QD_ABORTED_BY_HOST\n");
- scp->result =
- HOST_BYTE(DID_ABORT) | STATUS_BYTE(scsiqp->scsi_status);
+ scp->result = scsiqp->scsi_status;
+ set_host_byte(scp, DID_ABORT);
break;
default:
ASC_DBG(1, "done_status 0x%x\n", scsiqp->done_status);
- scp->result =
- HOST_BYTE(DID_ERROR) | STATUS_BYTE(scsiqp->scsi_status);
+ scp->result = scsiqp->scsi_status;
+ set_host_byte(scp, DID_ERROR);
break;
}
@@ -6775,51 +6755,35 @@ static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep)
ASC_DBG(2, "QD_WITH_ERROR\n");
switch (qdonep->d3.host_stat) {
case QHSTA_NO_ERROR:
+ scp->result = qdonep->d3.scsi_stat;
if (qdonep->d3.scsi_stat == SAM_STAT_CHECK_CONDITION) {
ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n");
ASC_DBG_PRT_SENSE(2, scp->sense_buffer,
SCSI_SENSE_BUFFERSIZE);
- /*
- * Note: The 'status_byte()' macro used by
- * target drivers defined in scsi.h shifts the
- * status byte returned by host drivers right
- * by 1 bit. This is why target drivers also
- * use right shifted status byte definitions.
- * For instance target drivers use
- * CHECK_CONDITION, defined to 0x1, instead of
- * the SCSI defined check condition value of
- * 0x2. Host drivers are supposed to return
- * the status byte as it is defined by SCSI.
- */
- scp->result = DRIVER_BYTE(DRIVER_SENSE) |
- STATUS_BYTE(qdonep->d3.scsi_stat);
- } else {
- scp->result = STATUS_BYTE(qdonep->d3.scsi_stat);
+ set_driver_byte(scp, DRIVER_SENSE);
}
break;
default:
/* QHSTA error occurred */
ASC_DBG(1, "host_stat 0x%x\n", qdonep->d3.host_stat);
- scp->result = HOST_BYTE(DID_BAD_TARGET);
+ set_host_byte(scp, DID_BAD_TARGET);
break;
}
break;
case QD_ABORTED_BY_HOST:
ASC_DBG(1, "QD_ABORTED_BY_HOST\n");
- scp->result =
- HOST_BYTE(DID_ABORT) | MSG_BYTE(qdonep->d3.
- scsi_msg) |
- STATUS_BYTE(qdonep->d3.scsi_stat);
+ scp->result = qdonep->d3.scsi_stat;
+ set_msg_byte(scp, qdonep->d3.scsi_msg);
+ set_host_byte(scp, DID_ABORT);
break;
default:
ASC_DBG(1, "done_stat 0x%x\n", qdonep->d3.done_stat);
- scp->result =
- HOST_BYTE(DID_ERROR) | MSG_BYTE(qdonep->d3.
- scsi_msg) |
- STATUS_BYTE(qdonep->d3.scsi_stat);
+ scp->result = qdonep->d3.scsi_stat;
+ set_msg_byte(scp, qdonep->d3.scsi_msg);
+ set_host_byte(scp, DID_ERROR);
break;
}
@@ -7558,7 +7522,7 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
"sg_tablesize %d\n", use_sg,
scp->device->host->sg_tablesize);
scsi_dma_unmap(scp);
- scp->result = HOST_BYTE(DID_ERROR);
+ set_host_byte(scp, DID_ERROR);
return ASC_ERROR;
}
@@ -7566,7 +7530,7 @@ static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
use_sg * sizeof(struct asc_sg_list), GFP_ATOMIC);
if (!asc_sg_head) {
scsi_dma_unmap(scp);
- scp->result = HOST_BYTE(DID_SOFT_ERROR);
+ set_host_byte(scp, DID_SOFT_ERROR);
return ASC_ERROR;
}
@@ -7809,7 +7773,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
"ADV_MAX_SG_LIST %d\n", use_sg,
scp->device->host->sg_tablesize);
scsi_dma_unmap(scp);
- scp->result = HOST_BYTE(DID_ERROR);
+ set_host_byte(scp, DID_ERROR);
reqp->cmndp = NULL;
scp->host_scribble = NULL;
@@ -7821,7 +7785,7 @@ adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp,
ret = adv_get_sglist(boardp, reqp, scsiqp, scp, use_sg);
if (ret != ADV_SUCCESS) {
scsi_dma_unmap(scp);
- scp->result = HOST_BYTE(DID_ERROR);
+ set_host_byte(scp, DID_ERROR);
reqp->cmndp = NULL;
scp->host_scribble = NULL;
@@ -8518,13 +8482,13 @@ static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp)
scmd_printk(KERN_ERR, scp, "ExeScsiQueue() ASC_ERROR, "
"err_code 0x%x\n", err_code);
ASC_STATS(scp->device->host, exe_error);
- scp->result = HOST_BYTE(DID_ERROR);
+ set_host_byte(scp, DID_ERROR);
break;
default:
scmd_printk(KERN_ERR, scp, "ExeScsiQueue() unknown, "
"err_code 0x%x\n", err_code);
ASC_STATS(scp->device->host, exe_unknown);
- scp->result = HOST_BYTE(DID_ERROR);
+ set_host_byte(scp, DID_ERROR);
break;
}
Replace the driver-defined status byte accessors by the mid-layer defined ones. Signed-off-by: Hannes Reinecke <hare@suse.de> --- drivers/scsi/advansys.c | 80 ++++++++++++++----------------------------------- 1 file changed, 22 insertions(+), 58 deletions(-)