diff mbox series

[4/7] dt-bindings: add documentation for sama7g5 ethernet interface

Message ID 1607085261-25255-5-git-send-email-claudiu.beznea@microchip.com
State Superseded
Headers show
Series net: macb: add support for sama7g5 | expand

Commit Message

Claudiu Beznea Dec. 4, 2020, 12:34 p.m. UTC 
Add documentation for SAMA7G5 ethernet interface.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 Documentation/devicetree/bindings/net/macb.txt | 1 +
 1 file changed, 1 insertion(+)

Comments

Andrew Lunn Dec. 5, 2020, 2:32 p.m. UTC | #1 
On Fri, Dec 04, 2020 at 02:34:18PM +0200, Claudiu Beznea wrote:
> Add documentation for SAMA7G5 ethernet interface.

> 

> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>


Reviewed-by: Andrew Lunn <andrew@lunn.ch>


    Andrew
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index 0b61a90f1592..26543a4e15d5 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -16,6 +16,7 @@  Required properties:
   Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
   Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
   Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC.
+  Use "microchip,sama7g5-emac" for Microchip SAMA7G5 ethernet interface.
   Or the generic form: "cdns,emac".
 - reg: Address and length of the register set for the device
 	For "sifive,fu540-c000-gem", second range is required to specify the