diff mbox series

[v2,1/4] media: v4l2-ctrls: Add intra-refresh period control

Message ID 20201206102717.19000-2-stanimir.varbanov@linaro.org
State Superseded
Headers show
Series Add random IR and AUD encoder controls | expand

Commit Message

Stanimir Varbanov Dec. 6, 2020, 10:27 a.m. UTC
Add a control to set intra-refresh period.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>

---
 .../userspace-api/media/v4l/ext-ctrls-codec.rst       | 11 +++++++++++
 drivers/media/v4l2-core/v4l2-ctrls.c                  |  2 ++
 include/uapi/linux/v4l2-controls.h                    |  1 +
 3 files changed, 14 insertions(+)

-- 
2.17.1

Comments

Hans Verkuil Jan. 12, 2021, 10:05 a.m. UTC | #1
On 06/12/2020 11:27, Stanimir Varbanov wrote:
> Add a control to set intra-refresh period.
> 
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> ---
>  .../userspace-api/media/v4l/ext-ctrls-codec.rst       | 11 +++++++++++
>  drivers/media/v4l2-core/v4l2-ctrls.c                  |  2 ++
>  include/uapi/linux/v4l2-controls.h                    |  1 +
>  3 files changed, 14 insertions(+)
> 
> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> index 454ecd9a0f83..d65d7c1381b7 100644
> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
> @@ -1104,6 +1104,17 @@ enum v4l2_mpeg_video_h264_entropy_mode -
>      macroblocks is refreshed until the cycle completes and starts from
>      the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
>  
> +``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)``
> +    Intra macroblock refresh period. This sets the period to refresh
> +    the whole frame. With other words, this defines the number of frames

With -> In

> +    for which the whole frame will be intra-refreshed.  An example:
> +    setting period to 1 means that the whole frame will be refreshed,
> +    setting period to 2 means that the half of macroblocks will be
> +    intra-refreshed on frameX and the other half of macroblocks
> +    will be refreshed in frameX + 1 and so on. Setting period to zero
> +    means no period is specified.
> +    Applicable to H264 and HEVC encoders.

I'm confused. Isn't this the same as V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB?
Except that here you don't give the number of macroblocks but instead the number
of frames it will take to fully refresh a frame and leave it to the driver to
calculate the number of macroblocks?

If I am right, then you need to clearly document the relationship between the
two controls, and what happens if you set them both.

It seems the venus driver already supports V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB,
so why add this control as well?

Regards,

	Hans

> +
>  ``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)``
>      Frame level rate control enable. If this control is disabled then
>      the quantization parameter for each frame type is constant and set
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> index 5cbe0ffbf501..ac44848d2d6e 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> @@ -869,6 +869,7 @@ const char *v4l2_ctrl_get_name(u32 id)
>  	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:	return "Decoder Slice Interface";
>  	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:	return "MPEG4 Loop Filter Enable";
>  	case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB:	return "Number of Intra Refresh MBs";
> +	case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD:		return "Intra Refresh Period";
>  	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:		return "Frame Level Rate Control Enable";
>  	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:			return "H264 MB Level Rate Control";
>  	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:			return "Sequence Header Mode";
> @@ -1260,6 +1261,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
>  		break;
>  	case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE:
>  	case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE:
> +	case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD:
>  		*type = V4L2_CTRL_TYPE_INTEGER;
>  		break;
>  	case V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME:
> diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
> index 823b214aac0c..54b9072ac49d 100644
> --- a/include/uapi/linux/v4l2-controls.h
> +++ b/include/uapi/linux/v4l2-controls.h
> @@ -422,6 +422,7 @@ enum v4l2_mpeg_video_multi_slice_mode {
>  #define V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE		(V4L2_CID_CODEC_BASE+227)
>  #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE		(V4L2_CID_CODEC_BASE+228)
>  #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME		(V4L2_CID_CODEC_BASE+229)
> +#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD	(V4L2_CID_CODEC_BASE+230)
>  
>  /* CIDs for the MPEG-2 Part 2 (H.262) codec */
>  #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL			(V4L2_CID_CODEC_BASE+270)
>
Stanimir Varbanov Jan. 18, 2021, 9:20 a.m. UTC | #2
On 1/12/21 12:05 PM, Hans Verkuil wrote:
> On 06/12/2020 11:27, Stanimir Varbanov wrote:
>> Add a control to set intra-refresh period.
>>
>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
>> ---
>>  .../userspace-api/media/v4l/ext-ctrls-codec.rst       | 11 +++++++++++
>>  drivers/media/v4l2-core/v4l2-ctrls.c                  |  2 ++
>>  include/uapi/linux/v4l2-controls.h                    |  1 +
>>  3 files changed, 14 insertions(+)
>>
>> diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> index 454ecd9a0f83..d65d7c1381b7 100644
>> --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
>> @@ -1104,6 +1104,17 @@ enum v4l2_mpeg_video_h264_entropy_mode -
>>      macroblocks is refreshed until the cycle completes and starts from
>>      the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
>>  
>> +``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)``
>> +    Intra macroblock refresh period. This sets the period to refresh
>> +    the whole frame. With other words, this defines the number of frames
> 
> With -> In
> 
>> +    for which the whole frame will be intra-refreshed.  An example:
>> +    setting period to 1 means that the whole frame will be refreshed,
>> +    setting period to 2 means that the half of macroblocks will be
>> +    intra-refreshed on frameX and the other half of macroblocks
>> +    will be refreshed in frameX + 1 and so on. Setting period to zero
>> +    means no period is specified.
>> +    Applicable to H264 and HEVC encoders.
> 
> I'm confused. Isn't this the same as V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB?
> Except that here you don't give the number of macroblocks but instead the number
> of frames it will take to fully refresh a frame and leave it to the driver to
> calculate the number of macroblocks?

Yes, correct. The periodic control looks more generic because it doesn't
limit the type of intra-refresh (cyclic vs random vs adaptive) but
instead set the number of frames to fully refresh the whole frame and is
also taken from Android mediacodec [1], where the user doesn't care too
much what intra-refresh type will be used but instead how much frames
are needed to fully refresh.

> 
> If I am right, then you need to clearly document the relationship between the
> two controls, and what happens if you set them both.

Yep, I can add such description.

One note here; the CYCLIC_INTRA_REFRESH_MB and INTRA_REFRESH_PERIOD are
not interchangeable because intra-refresh period could use different
type of inter-refresh, eg. random vs cyclic.

> 
> It seems the venus driver already supports V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB,
> so why add this control as well?

The cyclic intra-refresh control in Venus driver is just enumerable but
ignored when set, in other words it does nothing.

> 
> Regards,
> 
> 	Hans
> 

[1]
https://developer.android.com/reference/android/media/MediaFormat#KEY_INTRA_REFRESH_PERIOD
diff mbox series

Patch

diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
index 454ecd9a0f83..d65d7c1381b7 100644
--- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
+++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst
@@ -1104,6 +1104,17 @@  enum v4l2_mpeg_video_h264_entropy_mode -
     macroblocks is refreshed until the cycle completes and starts from
     the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
 
+``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)``
+    Intra macroblock refresh period. This sets the period to refresh
+    the whole frame. With other words, this defines the number of frames
+    for which the whole frame will be intra-refreshed.  An example:
+    setting period to 1 means that the whole frame will be refreshed,
+    setting period to 2 means that the half of macroblocks will be
+    intra-refreshed on frameX and the other half of macroblocks
+    will be refreshed in frameX + 1 and so on. Setting period to zero
+    means no period is specified.
+    Applicable to H264 and HEVC encoders.
+
 ``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)``
     Frame level rate control enable. If this control is disabled then
     the quantization parameter for each frame type is constant and set
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 5cbe0ffbf501..ac44848d2d6e 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -869,6 +869,7 @@  const char *v4l2_ctrl_get_name(u32 id)
 	case V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE:	return "Decoder Slice Interface";
 	case V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER:	return "MPEG4 Loop Filter Enable";
 	case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB:	return "Number of Intra Refresh MBs";
+	case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD:		return "Intra Refresh Period";
 	case V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE:		return "Frame Level Rate Control Enable";
 	case V4L2_CID_MPEG_VIDEO_MB_RC_ENABLE:			return "H264 MB Level Rate Control";
 	case V4L2_CID_MPEG_VIDEO_HEADER_MODE:			return "Sequence Header Mode";
@@ -1260,6 +1261,7 @@  void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 		break;
 	case V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE:
 	case V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE:
+	case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD:
 		*type = V4L2_CTRL_TYPE_INTEGER;
 		break;
 	case V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME:
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 823b214aac0c..54b9072ac49d 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -422,6 +422,7 @@  enum v4l2_mpeg_video_multi_slice_mode {
 #define V4L2_CID_MPEG_VIDEO_MV_H_SEARCH_RANGE		(V4L2_CID_CODEC_BASE+227)
 #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE		(V4L2_CID_CODEC_BASE+228)
 #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME		(V4L2_CID_CODEC_BASE+229)
+#define V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD	(V4L2_CID_CODEC_BASE+230)
 
 /* CIDs for the MPEG-2 Part 2 (H.262) codec */
 #define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL			(V4L2_CID_CODEC_BASE+270)