| Message ID | 1313135701-22456-2-git-send-email-shawn.guo@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
2011/8/12 Shawn Guo <shawn.guo@linaro.org>: > Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq > from gpio number. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > Cc: Sascha Hauer <s.hauer@pengutronix.de> > --- > arch/arm/mach-mx5/board-cpuimx51.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c > index 7c893fa..68934ea 100644 > --- a/arch/arm/mach-mx5/board-cpuimx51.c > +++ b/arch/arm/mach-mx5/board-cpuimx51.c > @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { > .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, > }, { > .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), > - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), > + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), > .irqflags = IRQF_TRIGGER_HIGH, > .uartclk = CPUIMX51_QUART_XTAL, > .regshift = CPUIMX51_QUART_REGSHIFT, > -- The fix has already in Sascah's tree: Author: Ben Dooks <ben-linux@fluff.org> Date: Thu Aug 4 16:47:35 2011 +0100 ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage irq_to_gpio() is being called on a GPIO so change to using gpio_to_irq() instead. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jason > 1.7.4.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel >
On Fri, Aug 12, 2011 at 05:36:32PM +0800, Jason Liu wrote: > 2011/8/12 Shawn Guo <shawn.guo@linaro.org>: > > Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq > > from gpio number. > > > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > > Cc: Sascha Hauer <s.hauer@pengutronix.de> > > --- > > arch/arm/mach-mx5/board-cpuimx51.c | 2 +- > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c > > index 7c893fa..68934ea 100644 > > --- a/arch/arm/mach-mx5/board-cpuimx51.c > > +++ b/arch/arm/mach-mx5/board-cpuimx51.c > > @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { > > .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, > > }, { > > .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), > > - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), > > + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), > > .irqflags = IRQF_TRIGGER_HIGH, > > .uartclk = CPUIMX51_QUART_XTAL, > > .regshift = CPUIMX51_QUART_REGSHIFT, > > -- > > The fix has already in Sascah's tree: > > Author: Ben Dooks <ben-linux@fluff.org> > Date: Thu Aug 4 16:47:35 2011 +0100 > > ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage > > irq_to_gpio() is being called on a GPIO so change to using > gpio_to_irq() instead. > > Signed-off-by: Ben Dooks <ben-linux@fluff.org> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > > Jason > Sorry, I missed that. Thanks for pointing it out, Jason. I will fold Ben's patch here, as I see Russell would probably pick up the series. Otherwise, Russell, please let me know if I should base it on Sascha's tree.
On Fri, Aug 12, 2011 at 07:13:07PM +0800, Shawn Guo wrote: > On Fri, Aug 12, 2011 at 05:36:32PM +0800, Jason Liu wrote: > > 2011/8/12 Shawn Guo <shawn.guo@linaro.org>: > > > Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq > > > from gpio number. > > > > > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > > > Cc: Sascha Hauer <s.hauer@pengutronix.de> > > > --- > > > arch/arm/mach-mx5/board-cpuimx51.c | 2 +- > > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > > > diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c > > > index 7c893fa..68934ea 100644 > > > --- a/arch/arm/mach-mx5/board-cpuimx51.c > > > +++ b/arch/arm/mach-mx5/board-cpuimx51.c > > > @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { > > > .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, > > > }, { > > > .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), > > > - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), > > > + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), > > > .irqflags = IRQF_TRIGGER_HIGH, > > > .uartclk = CPUIMX51_QUART_XTAL, > > > .regshift = CPUIMX51_QUART_REGSHIFT, > > > -- > > > > The fix has already in Sascah's tree: > > > > Author: Ben Dooks <ben-linux@fluff.org> > > Date: Thu Aug 4 16:47:35 2011 +0100 > > > > ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage > > > > irq_to_gpio() is being called on a GPIO so change to using > > gpio_to_irq() instead. > > > > Signed-off-by: Ben Dooks <ben-linux@fluff.org> > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > > > > Jason > > > Sorry, I missed that. Thanks for pointing it out, Jason. > > I will fold Ben's patch here, as I see Russell would probably pick up > the series. Otherwise, Russell, please let me know if I should base > it on Sascha's tree. Shouldn't this patch be targetted for -rc and maybe stable? It's difficult to tell from the commit description whether it really does cause a runtime problem or not. If it does go in to a -rc, then I can easily move my gpio patch set forward.
On Sat, Aug 13, 2011 at 10:35:29AM +0100, Russell King - ARM Linux wrote: > On Fri, Aug 12, 2011 at 07:13:07PM +0800, Shawn Guo wrote: > > On Fri, Aug 12, 2011 at 05:36:32PM +0800, Jason Liu wrote: > > > 2011/8/12 Shawn Guo <shawn.guo@linaro.org>: > > > > Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq > > > > from gpio number. > > > > > > > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> > > > > Cc: Sascha Hauer <s.hauer@pengutronix.de> > > > > --- > > > > arch/arm/mach-mx5/board-cpuimx51.c | 2 +- > > > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > > > > > diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c > > > > index 7c893fa..68934ea 100644 > > > > --- a/arch/arm/mach-mx5/board-cpuimx51.c > > > > +++ b/arch/arm/mach-mx5/board-cpuimx51.c > > > > @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { > > > > .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, > > > > }, { > > > > .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), > > > > - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), > > > > + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), > > > > .irqflags = IRQF_TRIGGER_HIGH, > > > > .uartclk = CPUIMX51_QUART_XTAL, > > > > .regshift = CPUIMX51_QUART_REGSHIFT, > > > > -- > > > > > > The fix has already in Sascah's tree: > > > > > > Author: Ben Dooks <ben-linux@fluff.org> > > > Date: Thu Aug 4 16:47:35 2011 +0100 > > > > > > ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage > > > > > > irq_to_gpio() is being called on a GPIO so change to using > > > gpio_to_irq() instead. > > > > > > Signed-off-by: Ben Dooks <ben-linux@fluff.org> > > > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > > > > > > Jason > > > > > Sorry, I missed that. Thanks for pointing it out, Jason. > > > > I will fold Ben's patch here, as I see Russell would probably pick up > > the series. Otherwise, Russell, please let me know if I should base > > it on Sascha's tree. > > Shouldn't this patch be targetted for -rc and maybe stable? It's > difficult to tell from the commit description whether it really does > cause a runtime problem or not. > > If it does go in to a -rc, then I can easily move my gpio patch set > forward. > Ah, yes. I just noticed that the patch is on the way to -rc2 through arm-soc tree.
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 7c893fa..68934ea 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO), + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT,
Instead of irq_to_gpio(), gpio_to_irq() should be used to get irq from gpio number. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-mx5/board-cpuimx51.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)