@@ -2017,40 +2017,6 @@ static void dsi_vc_initial_config(struct dsi_data *dsi, int vc)
dsi->vc[vc].source = DSI_VC_SOURCE_L4;
}
-static int dsi_vc_config_source(struct dsi_data *dsi, int vc,
- enum dsi_vc_source source)
-{
- if (dsi->vc[vc].source == source)
- return 0;
-
- DSSDBG("Source config of VC %d", vc);
-
- dsi_sync_vc(dsi, vc);
-
- dsi_vc_enable(dsi, vc, 0);
-
- /* VC_BUSY */
- if (!wait_for_bit_change(dsi, DSI_VC_CTRL(vc), 15, 0)) {
- DSSERR("vc(%d) busy when trying to config for VP\n", vc);
- return -EIO;
- }
-
- /* SOURCE, 0 = L4, 1 = video port */
- REG_FLD_MOD(dsi, DSI_VC_CTRL(vc), source, 1, 1);
-
- /* DCS_CMD_ENABLE */
- if (dsi->data->quirks & DSI_QUIRK_DCS_CMD_CONFIG_VC) {
- bool enable = source == DSI_VC_SOURCE_VP;
- REG_FLD_MOD(dsi, DSI_VC_CTRL(vc), enable, 30, 30);
- }
-
- dsi_vc_enable(dsi, vc, 1);
-
- dsi->vc[vc].source = source;
-
- return 0;
-}
-
static void dsi_vc_enable_hs(struct omap_dss_device *dssdev, int vc,
bool enable)
{
@@ -2072,10 +2038,6 @@ static void dsi_vc_enable_hs(struct omap_dss_device *dssdev, int vc,
dsi_if_enable(dsi, 1);
dsi_force_tx_stop_mode_io(dsi);
-
- /* start the DDR clock by sending a NULL packet */
- if (dsi->vm_timings.ddr_clk_always_on && enable)
- dsi_vc_send_null(dsi, vc, dsi->dsidev->channel);
}
static void dsi_vc_flush_long_data(struct dsi_data *dsi, int vc)
@@ -2270,8 +2232,6 @@ static int dsi_vc_send_long(struct dsi_data *dsi, int vc,
return -EINVAL;
}
- dsi_vc_config_source(dsi, vc, DSI_VC_SOURCE_L4);
-
dsi_vc_write_long_header(dsi, vc, msg->channel, msg->type, msg->tx_len, 0);
p = msg->tx_buf;
@@ -2331,8 +2291,6 @@ static int dsi_vc_send_short(struct dsi_data *dsi, int vc,
DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
vc, msg->type, pkt.header[1], pkt.header[2]);
- dsi_vc_config_source(dsi, vc, DSI_VC_SOURCE_L4);
-
if (FLD_GET(dsi_read_reg(dsi, DSI_VC_CTRL(vc)), 16, 16)) {
DSSERR("ERROR FIFO FULL, aborting transfer\n");
return -EINVAL;
@@ -3351,8 +3309,6 @@ static void dsi_update_screen_dispc(struct dsi_data *dsi)
DSSDBG("dsi_update_screen_dispc(%dx%d)\n", w, h);
- dsi_vc_config_source(dsi, vc, DSI_VC_SOURCE_VP);
-
bytespp = mipi_dsi_pixel_format_to_bpp(dsi->pix_fmt) / 8;
bytespl = w * bytespp;
bytespf = bytespl * h;
@@ -3522,14 +3478,12 @@ static int dsi_update_channel(struct omap_dss_device *dssdev, int vc)
dsi_set_ulps_auto(dsi, false);
- dsi_vc_enable_hs(dssdev, vc, true);
-
/*
* Send NOP between the frames. If we don't send something here, the
* updates stop working. This is probably related to DSI spec stating
* that the DSI host should transition to LP at least once per frame.
*/
- r = _dsi_send_nop(dsi, vc, dsi->dsidev->channel);
+ r = _dsi_send_nop(dsi, VC_CMD, dsi->dsidev->channel);
if (r < 0) {
DSSWARN("failed to send nop between frames: %d\n", r);
goto err;
@@ -3654,6 +3608,35 @@ static int dsi_configure_dsi_clocks(struct dsi_data *dsi)
return 0;
}
+static void dsi_setup_dsi_vcs(struct dsi_data *dsi)
+{
+ /* Setup VC_CMD for LP and cpu transfers */
+ REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_CMD), 0, 9, 9); /* LP */
+
+ REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_CMD), 0, 1, 1); /* SOURCE_L4 */
+ dsi->vc[VC_CMD].source = DSI_VC_SOURCE_L4;
+
+ /* Setup VC_VIDEO for HS and dispc transfers */
+ REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_VIDEO), 1, 9, 9); /* HS */
+
+ REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_VIDEO), 1, 1, 1); /* SOURCE_VP */
+ dsi->vc[VC_VIDEO].source = DSI_VC_SOURCE_VP;
+
+ if (dsi->data->quirks & DSI_QUIRK_DCS_CMD_CONFIG_VC)
+ REG_FLD_MOD(dsi, DSI_VC_CTRL(VC_VIDEO), 1, 30, 30); /* DCS_CMD_ENABLE */
+
+ dsi_vc_enable(dsi, VC_CMD, 1);
+ dsi_vc_enable(dsi, VC_VIDEO, 1);
+
+ dsi_if_enable(dsi, 1);
+
+ dsi_force_tx_stop_mode_io(dsi);
+
+ /* start the DDR clock by sending a NULL packet */
+ if (dsi->vm_timings.ddr_clk_always_on)
+ dsi_vc_send_null(dsi, VC_CMD, dsi->dsidev->channel);
+}
+
static int dsi_init_dsi(struct dsi_data *dsi)
{
int r;
@@ -3696,13 +3679,7 @@ static int dsi_init_dsi(struct dsi_data *dsi)
if (r)
goto err3;
- /* enable interface */
- dsi_vc_enable(dsi, 0, 1);
- dsi_vc_enable(dsi, 1, 1);
- dsi_vc_enable(dsi, 2, 1);
- dsi_vc_enable(dsi, 3, 1);
- dsi_if_enable(dsi, 1);
- dsi_force_tx_stop_mode_io(dsi);
+ dsi_setup_dsi_vcs(dsi);
return 0;
err3:
As we now have a fixed setup for VCs (VC0 for video stream, VC1 for commands), we can simplify the VC setup. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- drivers/gpu/drm/omapdrm/dss/dsi.c | 85 +++++++++++-------------------- 1 file changed, 31 insertions(+), 54 deletions(-)