diff mbox

[v2,1/8] ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage

Message ID 1313252047-8820-2-git-send-email-shawn.guo@linaro.org
State Accepted
Commit 546fb6cbde1d990af3e28e2f6d7061ef4eef25bf
Headers show

Commit Message

Shawn Guo Aug. 13, 2011, 4:14 p.m. UTC 
From: Ben Dooks <ben-linux@fluff.org>

irq_to_gpio() is being called on a GPIO so change to using
gpio_to_irq() instead.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/board-cpuimx51.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 7c893fa..68934ea 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -81,7 +81,7 @@  static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,