| Message ID | 20201218120534.13788-8-jbx6244@gmail.com |
|---|---|
| State | Accepted |
| Commit | 398a4087872a44921d0ede2afef53a3c9f779ab6 |
| Headers | show |
| Series | [1/8] dt-binding: watchdog: add more Rockchip compatibles to snps,dw-wdt.yaml | expand |
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 8ef8d038e..bec47e0be 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -304,7 +304,6 @@ reg = <0x10360000 0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_WDT>; - clock-names = "pclk_wdt"; status = "disabled"; };
A test with the command below gives this error: /arch/arm/boot/dts/rv1108-evb.dt.yaml: watchdog@10360000: clock-names:0: 'tclk' was expected Comment from the dw_wdt.c file: Try to request the watchdog dedicated timer clock source. It must be supplied if asynchronous mode is enabled. Otherwise fallback to the common timer/bus clocks configuration, in which the very first found clock supply both timer and APB signals. Like in the other Rockchip watchdog nodes the property "clock-names" is not needed, so remove it. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm/boot/dts/rv1108.dtsi | 1 - 1 file changed, 1 deletion(-)