| Message ID | 20201223212947.160565-2-paul.kocialkowski@bootlin.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | drm: LogiCVC display controller support | expand |
Hi, On Thu 24 Dec 20, 10:01, Rob Herring wrote: > On Wed, 23 Dec 2020 22:29:44 +0100, Paul Kocialkowski wrote: > > The Xylon LogiCVC is a display controller implemented as programmable > > logic in Xilinx FPGAs. > > > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> > > Acked-by: Rob Herring <robh@kernel.org> > > --- > > .../display/xylon,logicvc-display.yaml | 313 ++++++++++++++++++ > > 1 file changed, 313 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > > > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/xylon,logicvc-display.example.dt.yaml: logicvc@43c00000: 'display@0' does not match any of the regexes: '^gpio@[0-9a-f]+$', 'pinctrl-[0-9]+' > From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml > > See https://patchwork.ozlabs.org/patch/1420307 Just so you know, this specific issue is fixed in patch 2/4. Cheers, Paul
On Wed, Dec 23, 2020 at 10:29:44PM +0100, Paul Kocialkowski wrote: > The Xylon LogiCVC is a display controller implemented as programmable > logic in Xilinx FPGAs. > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > .../display/xylon,logicvc-display.yaml | 313 ++++++++++++++++++ > 1 file changed, 313 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > > diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > new file mode 100644 > index 000000000000..aca78334ad2c > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > @@ -0,0 +1,313 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2019 Bootlin > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Xylon LogiCVC display controller > + > +maintainers: > + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> > + > +description: | > + The Xylon LogiCVC is a display controller that supports multiple layers. > + It is usually implemented as programmable logic and was optimized for use > + with Xilinx Zynq-7000 SoCs and Xilinx FPGAs. > + > + Because the controller is intended for use in a FPGA, most of the > + configuration of the controller takes place at logic configuration bitstream > + synthesis time. As a result, many of the device-tree bindings are meant to > + reflect the synthesis configuration and must not be configured differently. > + Matching synthesis parameters are provided when applicable. > + > + Layers are declared in the "layers" sub-node and have dedicated configuration. > + In version 3 of the controller, each layer has fixed memory offset and address > + starting from the video memory base address for its framebuffer. In version 4, > + framebuffers are configured with a direct memory address instead. > + > +properties: > + compatible: > + enum: > + - xylon,logicvc-3.02.a-display > + - xylon,logicvc-4.01.a-display > + > + reg: > + maxItems: 1 > + > + clocks: > + minItems: 1 > + maxItems: 4 > + > + clock-names: > + minItems: 1 > + maxItems: 4 > + items: > + # vclk is required and must be provided as first item. > + - const: vclk > + # Other clocks are optional and can be provided in any order. > + - enum: > + - vclk2 > + - lvdsclk > + - lvdsclkn > + - enum: > + - vclk2 > + - lvdsclk > + - lvdsclkn > + - enum: > + - vclk2 > + - lvdsclk > + - lvdsclkn > + > + interrupts: > + maxItems: 1 > + > + memory-region: > + maxItems: 1 > + > + xylon,display-interface: > + enum: > + # Parallel RGB interface (C_DISPLAY_INTERFACE == 0) > + - parallel-rgb > + # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1) > + - bt656 > + # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2) > + - lvds-4bits > + # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4) > + - lvds-3bits > + # DVI interface (C_DISPLAY_INTERFACE == 5) > + - dvi > + description: Display output interface (C_DISPLAY_INTERFACE). As I mentioned before, we have standard properties for these or you know the setting based on the panel/bridge attached. > + > + xylon,display-colorspace: > + enum: > + # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0) > + - rgb > + # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1) > + - yuv422 > + # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2) > + - yuv444 > + description: Display output colorspace (C_DISPLAY_COLOR_SPACE). > + > + xylon,display-depth: > + $ref: "/schemas/types.yaml#/definitions/uint32" > + description: Display output depth (C_PIXEL_DATA_WIDTH). > + > + xylon,row-stride: > + $ref: "/schemas/types.yaml#/definitions/uint32" > + description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE). > + > + xylon,syscon: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: | > + Syscon phandle representing the top-level logicvc instance, useful when > + the parent node is not the top-level logicvc instance. Why do you need to support both ways? Drop this and require it to be the parent node. > + > + xylon,dithering: > + $ref: "/schemas/types.yaml#/definitions/flag" > + description: Dithering module is enabled (C_XCOLOR) > + > + xylon,background-layer: > + $ref: "/schemas/types.yaml#/definitions/flag" > + description: | > + The last layer is used to display a black background (C_USE_BACKGROUND). > + The layer must still be registered. > + > + xylon,layers-configurable: > + $ref: "/schemas/types.yaml#/definitions/flag" > + description: | > + Configuration of layers' size, position and offset is enabled > + (C_USE_SIZE_POSITION). > + > + layers: > + type: object > + > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + patternProperties: > + "^layer@[0-9]+$": > + type: object > + > + properties: > + reg: > + maxItems: 1 > + > + xylon,layer-depth: > + $ref: "/schemas/types.yaml#/definitions/uint32" > + description: Layer depth (C_LAYER_X_DATA_WIDTH). > + > + xylon,layer-colorspace: > + enum: > + # RGB colorspace (C_LAYER_X_TYPE == 0) > + - rgb > + # YUV packed colorspace (C_LAYER_X_TYPE == 0) > + - yuv > + description: Layer colorspace (C_LAYER_X_TYPE). > + > + xylon,layer-alpha-mode: > + enum: > + # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0) > + - layer > + # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1) > + - pixel > + description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE). > + > + xylon,layer-base-offset: > + $ref: "/schemas/types.yaml#/definitions/uint32" > + description: | > + Offset in number of lines (C_LAYER_X_OFFSET) starting from the > + video RAM base (C_VMEM_BASEADDR), only for version 3. > + > + xylon,layer-buffer-offset: > + $ref: "/schemas/types.yaml#/definitions/uint32" > + description: | > + Offset in number of lines (C_BUFFER_*_OFFSET) starting from the > + layer base offset for the second buffer used in double-buffering. > + > + xylon,layer-primary: > + $ref: "/schemas/types.yaml#/definitions/flag" > + description: | > + Layer should be registered as a primary plane (exactly one is > + required). > + > + additionalProperties: false > + > + required: > + - reg > + - xylon,layer-depth > + - xylon,layer-colorspace > + - xylon,layer-alpha-mode > + > + required: > + - "#address-cells" > + - "#size-cells" > + - layer@0 > + > + additionalProperties: false > + > + description: | > + The description of the display controller layers, containing layer > + sub-nodes that each describe a registered layer. > + > + ports: > + type: object You have to define what each port is. If only 1, then use just 'port'. We now have graph.yaml (in dt-schema). You need to reference that here. See drm-misc-next as everything has been converted. > + > +additionalProperties: false > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - interrupts > + - xylon,display-interface > + - xylon,display-colorspace > + - xylon,display-depth > + - xylon,row-stride > + - layers > + - ports > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + logicvc: logicvc@43c00000 { > + compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; > + reg = <0x43c00000 0x6000>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + > + logicvc_display: display@0 { > + compatible = "xylon,logicvc-3.02.a-display"; > + reg = <0x0 0x6000>; > + > + memory-region = <&logicvc_cma>; > + > + clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>; > + clock-names = "vclk", "lvdsclk"; > + > + interrupt-parent = <&intc>; > + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; > + > + xylon,display-interface = "lvds-4bits"; > + xylon,display-colorspace = "rgb"; > + xylon,display-depth = <16>; > + xylon,row-stride = <1024>; > + > + xylon,layers-configurable; > + > + layers { > + #address-cells = <1>; > + #size-cells = <0>; > + > + layer@0 { > + reg = <0>; > + xylon,layer-depth = <16>; > + xylon,layer-colorspace = "rgb"; > + xylon,layer-alpha-mode = "layer"; > + xylon,layer-base-offset = <0>; > + xylon,layer-buffer-offset = <480>; > + xylon,layer-primary; > + }; > + > + layer@1 { > + reg = <1>; > + xylon,layer-depth = <16>; > + xylon,layer-colorspace = "rgb"; > + xylon,layer-alpha-mode = "layer"; > + xylon,layer-base-offset = <2400>; > + xylon,layer-buffer-offset = <480>; > + }; > + > + layer@2 { > + reg = <2>; > + xylon,layer-depth = <16>; > + xylon,layer-colorspace = "rgb"; > + xylon,layer-alpha-mode = "layer"; > + xylon,layer-base-offset = <960>; > + xylon,layer-buffer-offset = <480>; > + }; > + > + layer@3 { > + reg = <3>; > + xylon,layer-depth = <16>; > + xylon,layer-colorspace = "rgb"; > + xylon,layer-alpha-mode = "layer"; > + xylon,layer-base-offset = <480>; > + xylon,layer-buffer-offset = <480>; > + }; > + > + layer@4 { > + reg = <4>; > + xylon,layer-depth = <16>; > + xylon,layer-colorspace = "rgb"; > + xylon,layer-alpha-mode = "layer"; > + xylon,layer-base-offset = <8192>; > + xylon,layer-buffer-offset = <480>; > + }; > + }; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + logicvc_out: port@1 { > + reg = <1>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + logicvc_output: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&panel_input>; > + }; > + }; > + }; > + }; > + }; > -- > 2.29.2 >
Hi Rob, I just found out as I'm about to send a new revision that I had not yet responded to your concerns here. On Tue 12 Jan 21, 09:17, Rob Herring wrote: > On Wed, Dec 23, 2020 at 10:29:44PM +0100, Paul Kocialkowski wrote: > > The Xylon LogiCVC is a display controller implemented as programmable > > logic in Xilinx FPGAs. > > > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> > > Acked-by: Rob Herring <robh@kernel.org> > > --- > > .../display/xylon,logicvc-display.yaml | 313 ++++++++++++++++++ > > 1 file changed, 313 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > > new file mode 100644 > > index 000000000000..aca78334ad2c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml > > @@ -0,0 +1,313 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +# Copyright 2019 Bootlin > > +%YAML 1.2 > > +--- > > +$id: "http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#" > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > + > > +title: Xylon LogiCVC display controller > > + > > +maintainers: > > + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> > > + > > +description: | > > + The Xylon LogiCVC is a display controller that supports multiple layers. > > + It is usually implemented as programmable logic and was optimized for use > > + with Xilinx Zynq-7000 SoCs and Xilinx FPGAs. > > + > > + Because the controller is intended for use in a FPGA, most of the > > + configuration of the controller takes place at logic configuration bitstream > > + synthesis time. As a result, many of the device-tree bindings are meant to > > + reflect the synthesis configuration and must not be configured differently. > > + Matching synthesis parameters are provided when applicable. > > + > > + Layers are declared in the "layers" sub-node and have dedicated configuration. > > + In version 3 of the controller, each layer has fixed memory offset and address > > + starting from the video memory base address for its framebuffer. In version 4, > > + framebuffers are configured with a direct memory address instead. > > + > > +properties: > > + compatible: > > + enum: > > + - xylon,logicvc-3.02.a-display > > + - xylon,logicvc-4.01.a-display > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + minItems: 1 > > + maxItems: 4 > > + > > + clock-names: > > + minItems: 1 > > + maxItems: 4 > > + items: > > + # vclk is required and must be provided as first item. > > + - const: vclk > > + # Other clocks are optional and can be provided in any order. > > + - enum: > > + - vclk2 > > + - lvdsclk > > + - lvdsclkn > > + - enum: > > + - vclk2 > > + - lvdsclk > > + - lvdsclkn > > + - enum: > > + - vclk2 > > + - lvdsclk > > + - lvdsclkn > > + > > + interrupts: > > + maxItems: 1 > > + > > + memory-region: > > + maxItems: 1 > > + > > + xylon,display-interface: > > + enum: > > + # Parallel RGB interface (C_DISPLAY_INTERFACE == 0) > > + - parallel-rgb > > + # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1) > > + - bt656 > > + # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2) > > + - lvds-4bits > > + # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4) > > + - lvds-3bits > > + # DVI interface (C_DISPLAY_INTERFACE == 5) > > + - dvi > > + description: Display output interface (C_DISPLAY_INTERFACE). > > As I mentioned before, we have standard properties for these or you know > the setting based on the panel/bridge attached. The point here is to indicate how the bitstream was configured and not to indicate what some run-time configuration should be. The bottomline is to let the driver have knowledge of the bitstream configuration, like it's done for the other properties. This could typically be used by the driver to check if a connected panel/bridge is compatible or not with the bitstream configuration. As a result, it doesn't reflect the general "bus configuration" for which we may have a generic property, but a bitstream configuration property that is specific to our hardware. Hence why I think it makes sense to have it described that way. > > + > > + xylon,display-colorspace: > > + enum: > > + # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0) > > + - rgb > > + # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1) > > + - yuv422 > > + # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2) > > + - yuv444 > > + description: Display output colorspace (C_DISPLAY_COLOR_SPACE). > > + > > + xylon,display-depth: > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > + description: Display output depth (C_PIXEL_DATA_WIDTH). > > + > > + xylon,row-stride: > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > + description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE). > > + > > + xylon,syscon: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: | > > + Syscon phandle representing the top-level logicvc instance, useful when > > + the parent node is not the top-level logicvc instance. > > Why do you need to support both ways? Drop this and require it to be the > parent node. Fair enough, I guess I had seen similar things around but there's no real use-case as far as I know. > > + > > + xylon,dithering: > > + $ref: "/schemas/types.yaml#/definitions/flag" > > + description: Dithering module is enabled (C_XCOLOR) > > + > > + xylon,background-layer: > > + $ref: "/schemas/types.yaml#/definitions/flag" > > + description: | > > + The last layer is used to display a black background (C_USE_BACKGROUND). > > + The layer must still be registered. > > + > > + xylon,layers-configurable: > > + $ref: "/schemas/types.yaml#/definitions/flag" > > + description: | > > + Configuration of layers' size, position and offset is enabled > > + (C_USE_SIZE_POSITION). > > + > > + layers: > > + type: object > > + > > + properties: > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 0 > > + > > + patternProperties: > > + "^layer@[0-9]+$": > > + type: object > > + > > + properties: > > + reg: > > + maxItems: 1 > > + > > + xylon,layer-depth: > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > + description: Layer depth (C_LAYER_X_DATA_WIDTH). > > + > > + xylon,layer-colorspace: > > + enum: > > + # RGB colorspace (C_LAYER_X_TYPE == 0) > > + - rgb > > + # YUV packed colorspace (C_LAYER_X_TYPE == 0) > > + - yuv > > + description: Layer colorspace (C_LAYER_X_TYPE). > > + > > + xylon,layer-alpha-mode: > > + enum: > > + # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0) > > + - layer > > + # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1) > > + - pixel > > + description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE). > > + > > + xylon,layer-base-offset: > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > + description: | > > + Offset in number of lines (C_LAYER_X_OFFSET) starting from the > > + video RAM base (C_VMEM_BASEADDR), only for version 3. > > + > > + xylon,layer-buffer-offset: > > + $ref: "/schemas/types.yaml#/definitions/uint32" > > + description: | > > + Offset in number of lines (C_BUFFER_*_OFFSET) starting from the > > + layer base offset for the second buffer used in double-buffering. > > + > > + xylon,layer-primary: > > + $ref: "/schemas/types.yaml#/definitions/flag" > > + description: | > > + Layer should be registered as a primary plane (exactly one is > > + required). > > + > > + additionalProperties: false > > + > > + required: > > + - reg > > + - xylon,layer-depth > > + - xylon,layer-colorspace > > + - xylon,layer-alpha-mode > > + > > + required: > > + - "#address-cells" > > + - "#size-cells" > > + - layer@0 > > + > > + additionalProperties: false > > + > > + description: | > > + The description of the display controller layers, containing layer > > + sub-nodes that each describe a registered layer. > > + > > + ports: > > + type: object > > You have to define what each port is. If only 1, then use just 'port'. > > We now have graph.yaml (in dt-schema). You need to reference that here. > See drm-misc-next as everything has been converted. I will definitely switch to a single port and describe its purpose. Thanks! Paul > > + > > +additionalProperties: false > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - interrupts > > + - xylon,display-interface > > + - xylon,display-colorspace > > + - xylon,display-depth > > + - xylon,row-stride > > + - layers > > + - ports > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/irq.h> > > + > > + logicvc: logicvc@43c00000 { > > + compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; > > + reg = <0x43c00000 0x6000>; > > + > > + #address-cells = <1>; > > + #size-cells = <1>; > > + > > + logicvc_display: display@0 { > > + compatible = "xylon,logicvc-3.02.a-display"; > > + reg = <0x0 0x6000>; > > + > > + memory-region = <&logicvc_cma>; > > + > > + clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>; > > + clock-names = "vclk", "lvdsclk"; > > + > > + interrupt-parent = <&intc>; > > + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; > > + > > + xylon,display-interface = "lvds-4bits"; > > + xylon,display-colorspace = "rgb"; > > + xylon,display-depth = <16>; > > + xylon,row-stride = <1024>; > > + > > + xylon,layers-configurable; > > + > > + layers { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + layer@0 { > > + reg = <0>; > > + xylon,layer-depth = <16>; > > + xylon,layer-colorspace = "rgb"; > > + xylon,layer-alpha-mode = "layer"; > > + xylon,layer-base-offset = <0>; > > + xylon,layer-buffer-offset = <480>; > > + xylon,layer-primary; > > + }; > > + > > + layer@1 { > > + reg = <1>; > > + xylon,layer-depth = <16>; > > + xylon,layer-colorspace = "rgb"; > > + xylon,layer-alpha-mode = "layer"; > > + xylon,layer-base-offset = <2400>; > > + xylon,layer-buffer-offset = <480>; > > + }; > > + > > + layer@2 { > > + reg = <2>; > > + xylon,layer-depth = <16>; > > + xylon,layer-colorspace = "rgb"; > > + xylon,layer-alpha-mode = "layer"; > > + xylon,layer-base-offset = <960>; > > + xylon,layer-buffer-offset = <480>; > > + }; > > + > > + layer@3 { > > + reg = <3>; > > + xylon,layer-depth = <16>; > > + xylon,layer-colorspace = "rgb"; > > + xylon,layer-alpha-mode = "layer"; > > + xylon,layer-base-offset = <480>; > > + xylon,layer-buffer-offset = <480>; > > + }; > > + > > + layer@4 { > > + reg = <4>; > > + xylon,layer-depth = <16>; > > + xylon,layer-colorspace = "rgb"; > > + xylon,layer-alpha-mode = "layer"; > > + xylon,layer-base-offset = <8192>; > > + xylon,layer-buffer-offset = <480>; > > + }; > > + }; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + logicvc_out: port@1 { > > + reg = <1>; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + logicvc_output: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = <&panel_input>; > > + }; > > + }; > > + }; > > + }; > > + }; > > -- > > 2.29.2 > > -- Paul Kocialkowski, Bootlin Embedded Linux and kernel engineering https://bootlin.com
diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml new file mode 100644 index 000000000000..aca78334ad2c --- /dev/null +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml @@ -0,0 +1,313 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Bootlin +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Xylon LogiCVC display controller + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@bootlin.com> + +description: | + The Xylon LogiCVC is a display controller that supports multiple layers. + It is usually implemented as programmable logic and was optimized for use + with Xilinx Zynq-7000 SoCs and Xilinx FPGAs. + + Because the controller is intended for use in a FPGA, most of the + configuration of the controller takes place at logic configuration bitstream + synthesis time. As a result, many of the device-tree bindings are meant to + reflect the synthesis configuration and must not be configured differently. + Matching synthesis parameters are provided when applicable. + + Layers are declared in the "layers" sub-node and have dedicated configuration. + In version 3 of the controller, each layer has fixed memory offset and address + starting from the video memory base address for its framebuffer. In version 4, + framebuffers are configured with a direct memory address instead. + +properties: + compatible: + enum: + - xylon,logicvc-3.02.a-display + - xylon,logicvc-4.01.a-display + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + items: + # vclk is required and must be provided as first item. + - const: vclk + # Other clocks are optional and can be provided in any order. + - enum: + - vclk2 + - lvdsclk + - lvdsclkn + - enum: + - vclk2 + - lvdsclk + - lvdsclkn + - enum: + - vclk2 + - lvdsclk + - lvdsclkn + + interrupts: + maxItems: 1 + + memory-region: + maxItems: 1 + + xylon,display-interface: + enum: + # Parallel RGB interface (C_DISPLAY_INTERFACE == 0) + - parallel-rgb + # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1) + - bt656 + # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2) + - lvds-4bits + # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4) + - lvds-3bits + # DVI interface (C_DISPLAY_INTERFACE == 5) + - dvi + description: Display output interface (C_DISPLAY_INTERFACE). + + xylon,display-colorspace: + enum: + # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0) + - rgb + # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1) + - yuv422 + # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2) + - yuv444 + description: Display output colorspace (C_DISPLAY_COLOR_SPACE). + + xylon,display-depth: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: Display output depth (C_PIXEL_DATA_WIDTH). + + xylon,row-stride: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE). + + xylon,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Syscon phandle representing the top-level logicvc instance, useful when + the parent node is not the top-level logicvc instance. + + xylon,dithering: + $ref: "/schemas/types.yaml#/definitions/flag" + description: Dithering module is enabled (C_XCOLOR) + + xylon,background-layer: + $ref: "/schemas/types.yaml#/definitions/flag" + description: | + The last layer is used to display a black background (C_USE_BACKGROUND). + The layer must still be registered. + + xylon,layers-configurable: + $ref: "/schemas/types.yaml#/definitions/flag" + description: | + Configuration of layers' size, position and offset is enabled + (C_USE_SIZE_POSITION). + + layers: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^layer@[0-9]+$": + type: object + + properties: + reg: + maxItems: 1 + + xylon,layer-depth: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: Layer depth (C_LAYER_X_DATA_WIDTH). + + xylon,layer-colorspace: + enum: + # RGB colorspace (C_LAYER_X_TYPE == 0) + - rgb + # YUV packed colorspace (C_LAYER_X_TYPE == 0) + - yuv + description: Layer colorspace (C_LAYER_X_TYPE). + + xylon,layer-alpha-mode: + enum: + # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0) + - layer + # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1) + - pixel + description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE). + + xylon,layer-base-offset: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: | + Offset in number of lines (C_LAYER_X_OFFSET) starting from the + video RAM base (C_VMEM_BASEADDR), only for version 3. + + xylon,layer-buffer-offset: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: | + Offset in number of lines (C_BUFFER_*_OFFSET) starting from the + layer base offset for the second buffer used in double-buffering. + + xylon,layer-primary: + $ref: "/schemas/types.yaml#/definitions/flag" + description: | + Layer should be registered as a primary plane (exactly one is + required). + + additionalProperties: false + + required: + - reg + - xylon,layer-depth + - xylon,layer-colorspace + - xylon,layer-alpha-mode + + required: + - "#address-cells" + - "#size-cells" + - layer@0 + + additionalProperties: false + + description: | + The description of the display controller layers, containing layer + sub-nodes that each describe a registered layer. + + ports: + type: object + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - xylon,display-interface + - xylon,display-colorspace + - xylon,display-depth + - xylon,row-stride + - layers + - ports + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + logicvc: logicvc@43c00000 { + compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd"; + reg = <0x43c00000 0x6000>; + + #address-cells = <1>; + #size-cells = <1>; + + logicvc_display: display@0 { + compatible = "xylon,logicvc-3.02.a-display"; + reg = <0x0 0x6000>; + + memory-region = <&logicvc_cma>; + + clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>; + clock-names = "vclk", "lvdsclk"; + + interrupt-parent = <&intc>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + + xylon,display-interface = "lvds-4bits"; + xylon,display-colorspace = "rgb"; + xylon,display-depth = <16>; + xylon,row-stride = <1024>; + + xylon,layers-configurable; + + layers { + #address-cells = <1>; + #size-cells = <0>; + + layer@0 { + reg = <0>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <0>; + xylon,layer-buffer-offset = <480>; + xylon,layer-primary; + }; + + layer@1 { + reg = <1>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <2400>; + xylon,layer-buffer-offset = <480>; + }; + + layer@2 { + reg = <2>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <960>; + xylon,layer-buffer-offset = <480>; + }; + + layer@3 { + reg = <3>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <480>; + xylon,layer-buffer-offset = <480>; + }; + + layer@4 { + reg = <4>; + xylon,layer-depth = <16>; + xylon,layer-colorspace = "rgb"; + xylon,layer-alpha-mode = "layer"; + xylon,layer-base-offset = <8192>; + xylon,layer-buffer-offset = <480>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + logicvc_out: port@1 { + reg = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + logicvc_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + }; + };