diff mbox series

amd-xgbe: remove h from printk format specifier

Message ID 20201223194345.125205-1-trix@redhat.com
State New
Headers show
Series amd-xgbe: remove h from printk format specifier | expand

Commit Message

Tom Rix Dec. 23, 2020, 7:43 p.m. UTC 
From: Tom Rix <trix@redhat.com>

This change fixes the checkpatch warning described in this commit
commit cbacb5ab0aa0 ("docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]")

Standard integer promotion is already done and %hx and %hhx is useless
so do not encourage the use of %hh[xudi] or %h[xudi].

Signed-off-by: Tom Rix <trix@redhat.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index 61f39a0e04f9..3c18f26bf2a5 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -339,14 +339,14 @@  static int xgbe_set_link_ksettings(struct net_device *netdev,
 	speed = cmd->base.speed;
 
 	if (cmd->base.phy_address != pdata->phy.address) {
-		netdev_err(netdev, "invalid phy address %hhu\n",
+		netdev_err(netdev, "invalid phy address %u\n",
 			   cmd->base.phy_address);
 		return -EINVAL;
 	}
 
 	if ((cmd->base.autoneg != AUTONEG_ENABLE) &&
 	    (cmd->base.autoneg != AUTONEG_DISABLE)) {
-		netdev_err(netdev, "unsupported autoneg %hhu\n",
+		netdev_err(netdev, "unsupported autoneg %u\n",
 			   cmd->base.autoneg);
 		return -EINVAL;
 	}
@@ -358,7 +358,7 @@  static int xgbe_set_link_ksettings(struct net_device *netdev,
 		}
 
 		if (cmd->base.duplex != DUPLEX_FULL) {
-			netdev_err(netdev, "unsupported duplex %hhu\n",
+			netdev_err(netdev, "unsupported duplex %u\n",
 				   cmd->base.duplex);
 			return -EINVAL;
 		}