[v10,2/7,v10,2/7] : arm64: dts: mt8183: add svs device information

Message ID 20201227105449.11452-3-roger.lu@mediatek.com
State New
Headers show
Series
  • soc: mediatek: SVS: introduce MTK SVS engine
Related show

Commit Message

Roger Lu Dec. 27, 2020, 10:54 a.m.
add compitable/reg/irq/clock/efuse setting in svs node

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8183.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 9cfd961c45eb..b017eb7fbf2a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -479,6 +479,18 @@ 
 			status = "disabled";
 		};
 
+		svs: svs@1100b000 {
+			compatible = "mediatek,mt8183-svs";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&thermal_calibration>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+		};
+
 		i2c3: i2c@1100f000 {
 			compatible = "mediatek,mt8183-i2c";
 			reg = <0 0x1100f000 0 0x1000>,
@@ -724,6 +736,14 @@ 
 			compatible = "mediatek,mt8183-efuse",
 				     "mediatek,efuse";
 			reg = <0 0x11f10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			thermal_calibration: calib@180 {
+				reg = <0x180 0xc>;
+			};
+			svs_calibration: calib@580 {
+				reg = <0x580 0x64>;
+			};
 		};
 
 		u3phy: usb-phy@11f40000 {