diff mbox series

[v10,6/7,v10,6/7] : arm64: dts: mt8192: add svs device information

Message ID 20201227105449.11452-7-roger.lu@mediatek.com
State Superseded
Headers show
Series soc: mediatek: SVS: introduce MTK SVS engine | expand

Commit Message

Roger Lu Dec. 27, 2020, 10:54 a.m. UTC
add compitable/reg/irq/clock/efuse/reset setting in svs node

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8192.dtsi | 34 ++++++++++++++++++++++++
 1 file changed, 34 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 69d45c7b31f1..8fc2d3c370a7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -224,6 +224,14 @@ 
 			compatible = "mediatek,mt8192-infracfg", "syscon";
 			reg = <0 0x10001000 0 0x1000>;
 			#clock-cells = <1>;
+
+			infracfg_rst: reset-controller {
+				compatible = "mediatek,infra-reset", "ti,syscon-reset";
+				#reset-cells = <1>;
+				ti,reset-bits = <
+					0x150 5 0x154 5 0 0     (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* 0: svs */
+				>;
+			};
 		};
 
 		pericfg: syscon@10003000 {
@@ -318,6 +326,20 @@ 
 			status = "disabled";
 		};
 
+		svs: svs@1100b000 {
+			compatible = "mediatek,mt8192-svs";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&infracfg CLK_INFRA_THERM>;
+			clock-names = "main";
+			nvmem-cells = <&svs_calibration>,
+				      <&lvts_e_data1>;
+			nvmem-cell-names = "svs-calibration-data",
+					   "t-calibration-data";
+			resets = <&infracfg_rst 0>;
+			reset-names = "svs_rst";
+		};
+
 		spi1: spi@11010000 {
 			compatible = "mediatek,mt8192-spi",
 				     "mediatek,mt6765-spi";
@@ -422,6 +444,18 @@ 
 			#clock-cells = <1>;
 		};
 
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+
+			lvts_e_data1: data1 {
+				reg = <0x1C0 0x58>;
+			};
+			svs_calibration: calib@580 {
+				reg = <0x580 0x68>;
+			};
+		};
+
 		i2c3: i2c3@11cb0000 {
 			compatible = "mediatek,mt8192-i2c";
 			reg = <0 0x11cb0000 0 0x1000>,