@@ -33,7 +33,6 @@ struct exynos_bus {
unsigned long curr_freq;
- struct opp_table *opp_table;
struct clk *clk;
unsigned int ratio;
};
@@ -159,10 +158,7 @@ static void exynos_bus_exit(struct device *dev)
platform_device_unregister(bus->icc_pdev);
- dev_pm_opp_of_remove_table(dev);
clk_disable_unprepare(bus->clk);
- dev_pm_opp_put_regulators(bus->opp_table);
- bus->opp_table = NULL;
}
static void exynos_bus_passive_exit(struct device *dev)
@@ -171,7 +167,6 @@ static void exynos_bus_passive_exit(struct device *dev)
platform_device_unregister(bus->icc_pdev);
- dev_pm_opp_of_remove_table(dev);
clk_disable_unprepare(bus->clk);
}
@@ -183,15 +178,13 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
const char *vdd = "vdd";
int i, ret, count, size;
- opp_table = dev_pm_opp_set_regulators(dev, &vdd, 1);
+ opp_table = devm_pm_opp_set_regulators(dev, &vdd, 1);
if (IS_ERR(opp_table)) {
ret = PTR_ERR(opp_table);
dev_err(dev, "failed to set regulators %d\n", ret);
return ret;
}
- bus->opp_table = opp_table;
-
/*
* Get the devfreq-event devices to get the current utilization of
* buses. This raw data will be used in devfreq ondemand governor.
@@ -199,25 +192,20 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
count = devfreq_event_get_edev_count(dev, "devfreq-events");
if (count < 0) {
dev_err(dev, "failed to get the count of devfreq-event dev\n");
- ret = count;
- goto err_regulator;
+ return count;
}
bus->edev_count = count;
size = sizeof(*bus->edev) * count;
bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
- if (!bus->edev) {
- ret = -ENOMEM;
- goto err_regulator;
- }
+ if (!bus->edev)
+ return -ENOMEM;
for (i = 0; i < count; i++) {
bus->edev[i] = devfreq_event_get_edev_by_phandle(dev,
"devfreq-events", i);
- if (IS_ERR(bus->edev[i])) {
- ret = -EPROBE_DEFER;
- goto err_regulator;
- }
+ if (IS_ERR(bus->edev[i]))
+ return -EPROBE_DEFER;
}
/*
@@ -234,12 +222,6 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
bus->ratio = DEFAULT_SATURATION_RATIO;
return 0;
-
-err_regulator:
- dev_pm_opp_put_regulators(bus->opp_table);
- bus->opp_table = NULL;
-
- return ret;
}
static int exynos_bus_parse_of(struct device_node *np,
@@ -264,7 +246,7 @@ static int exynos_bus_parse_of(struct device_node *np,
}
/* Get the freq and voltage from OPP table to scale the bus freq */
- ret = dev_pm_opp_of_add_table(dev);
+ ret = devm_pm_opp_of_add_table(dev);
if (ret < 0) {
dev_err(dev, "failed to get OPP table\n");
goto err_clk;
@@ -276,15 +258,13 @@ static int exynos_bus_parse_of(struct device_node *np,
if (IS_ERR(opp)) {
dev_err(dev, "failed to find dev_pm_opp\n");
ret = PTR_ERR(opp);
- goto err_opp;
+ goto err_clk;
}
bus->curr_freq = dev_pm_opp_get_freq(opp);
dev_pm_opp_put(opp);
return 0;
-err_opp:
- dev_pm_opp_of_remove_table(dev);
err_clk:
clk_disable_unprepare(bus->clk);
@@ -425,7 +405,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
/* Parse the device-tree to get the resource information */
ret = exynos_bus_parse_of(np, bus);
if (ret < 0)
- goto err_reg;
+ return ret;
if (passive)
ret = exynos_bus_profile_init_passive(bus, profile);
@@ -456,11 +436,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
return 0;
err:
- dev_pm_opp_of_remove_table(dev);
clk_disable_unprepare(bus->clk);
-err_reg:
- dev_pm_opp_put_regulators(bus->opp_table);
- bus->opp_table = NULL;
return ret;
}
Use devm_pm_opp_* API to simplify code, and remove opp_table from exynos_bus. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> --- drivers/devfreq/exynos-bus.c | 42 ++++++++---------------------------- 1 file changed, 9 insertions(+), 33 deletions(-)