diff mbox series

[v2] media: ov8856: Fix Bayer format dependance on mode

Message ID 20210107142123.639477-1-robert.foss@linaro.org
State New
Headers show
Series [v2] media: ov8856: Fix Bayer format dependance on mode | expand

Commit Message

Robert Foss Jan. 7, 2021, 2:21 p.m. UTC
The Bayer GRBG10 mode used for earlier modes 3280x2460 and
1640x1232 isn't the mode output by the sensor for the
3264x2448 and 1632x1224 modes.

Switch from MEDIA_BUS_FMT_SGRBG10_1X10 to MEDIA_BUS_FMT_SBGGR10_1X10
for 3264x2448 & 1632x1224 modes.

Signed-off-by: Robert Foss <robert.foss@linaro.org>

---

Changes since v1:
 - Sakari: Added mode information to ov8856_mode struct
 - Sakari: enum_mbus_code updated

 drivers/media/i2c/ov8856.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

-- 
2.27.0

Comments

Tomasz Figa Jan. 8, 2021, 9:49 a.m. UTC | #1
Hi Robert,

On Thu, Jan 7, 2021 at 11:21 PM Robert Foss <robert.foss@linaro.org> wrote:
>

> The Bayer GRBG10 mode used for earlier modes 3280x2460 and

> 1640x1232 isn't the mode output by the sensor for the

> 3264x2448 and 1632x1224 modes.

>

> Switch from MEDIA_BUS_FMT_SGRBG10_1X10 to MEDIA_BUS_FMT_SBGGR10_1X10

> for 3264x2448 & 1632x1224 modes.

>

> Signed-off-by: Robert Foss <robert.foss@linaro.org>

> ---

>

> Changes since v1:

>  - Sakari: Added mode information to ov8856_mode struct

>  - Sakari: enum_mbus_code updated

>

>  drivers/media/i2c/ov8856.c | 24 ++++++++++++++++++------

>  1 file changed, 18 insertions(+), 6 deletions(-)

>

> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c

> index 2f4ceaa80593..7cd83564585c 100644

> --- a/drivers/media/i2c/ov8856.c

> +++ b/drivers/media/i2c/ov8856.c

> @@ -126,6 +126,9 @@ struct ov8856_mode {

>

>         /* Sensor register settings for this resolution */

>         const struct ov8856_reg_list reg_list;

> +

> +       /* MEDIA_BUS_FMT for this mode */

> +       u32 code;

>  };

>

>  static const struct ov8856_reg mipi_data_rate_720mbps[] = {

> @@ -942,6 +945,11 @@ static const char * const ov8856_test_pattern_menu[] = {

>         "Bottom-Top Darker Color Bar"

>  };

>

> +static const u32 ov8856_formats[] = {

> +       MEDIA_BUS_FMT_SBGGR10_1X10,

> +       MEDIA_BUS_FMT_SGRBG10_1X10,

> +};

> +

>  static const s64 link_freq_menu_items[] = {

>         OV8856_LINK_FREQ_360MHZ,

>         OV8856_LINK_FREQ_180MHZ

> @@ -974,6 +982,7 @@ static const struct ov8856_mode supported_modes[] = {

>                         .regs = mode_3280x2464_regs,

>                 },

>                 .link_freq_index = OV8856_LINK_FREQ_720MBPS,

> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

>         },

>         {

>                 .width = 3264,

> @@ -986,6 +995,7 @@ static const struct ov8856_mode supported_modes[] = {

>                         .regs = mode_3264x2448_regs,

>                 },

>                 .link_freq_index = OV8856_LINK_FREQ_720MBPS,

> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

>         },

>         {

>                 .width = 1640,

> @@ -998,6 +1008,7 @@ static const struct ov8856_mode supported_modes[] = {

>                         .regs = mode_1640x1232_regs,

>                 },

>                 .link_freq_index = OV8856_LINK_FREQ_360MBPS,

> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

>         },

>         {

>                 .width = 1632,

> @@ -1010,6 +1021,7 @@ static const struct ov8856_mode supported_modes[] = {

>                         .regs = mode_1632x1224_regs,

>                 },

>                 .link_freq_index = OV8856_LINK_FREQ_360MBPS,

> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

>         }

>  };

>

> @@ -1281,8 +1293,8 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode,

>  {

>         fmt->width = mode->width;

>         fmt->height = mode->height;

> -       fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;

>         fmt->field = V4L2_FIELD_NONE;

> +       fmt->code = mode->code;

>  }

>

>  static int ov8856_start_streaming(struct ov8856 *ov8856)

> @@ -1519,11 +1531,10 @@ static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,

>                                  struct v4l2_subdev_pad_config *cfg,

>                                  struct v4l2_subdev_mbus_code_enum *code)

>  {

> -       /* Only one bayer order GRBG is supported */

> -       if (code->index > 0)

> +       if (code->index >= ARRAY_SIZE(ov8856_formats))

>                 return -EINVAL;

>

> -       code->code = MEDIA_BUS_FMT_SGRBG10_1X10;

> +       code->code = ov8856_formats[code->index];

>

>         return 0;

>  }

> @@ -1532,10 +1543,11 @@ static int ov8856_enum_frame_size(struct v4l2_subdev *sd,

>                                   struct v4l2_subdev_pad_config *cfg,

>                                   struct v4l2_subdev_frame_size_enum *fse)

>  {

> -       if (fse->index >= ARRAY_SIZE(supported_modes))

> +       if ((fse->code != ov8856_formats[0]) &&

> +           (fse->code != ov8856_formats[1]))


Shouldn't this be validated against the current mode? I guess it's the
question about which part of the state takes precedence - the mbus
code or the frame size.

Best regards,
Tomasz
Andrey Konovalov Jan. 8, 2021, 10:46 a.m. UTC | #2
Hi Robert and Tomasz,

On 08.01.2021 12:49, Tomasz Figa wrote:
> Hi Robert,

> 

> On Thu, Jan 7, 2021 at 11:21 PM Robert Foss <robert.foss@linaro.org> wrote:

>>

>> The Bayer GRBG10 mode used for earlier modes 3280x2460 and

>> 1640x1232 isn't the mode output by the sensor for the

>> 3264x2448 and 1632x1224 modes.

>>

>> Switch from MEDIA_BUS_FMT_SGRBG10_1X10 to MEDIA_BUS_FMT_SBGGR10_1X10

>> for 3264x2448 & 1632x1224 modes.

>>

>> Signed-off-by: Robert Foss <robert.foss@linaro.org>

>> ---

>>

>> Changes since v1:

>>   - Sakari: Added mode information to ov8856_mode struct

>>   - Sakari: enum_mbus_code updated

>>

>>   drivers/media/i2c/ov8856.c | 24 ++++++++++++++++++------

>>   1 file changed, 18 insertions(+), 6 deletions(-)

>>

>> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c

>> index 2f4ceaa80593..7cd83564585c 100644

>> --- a/drivers/media/i2c/ov8856.c

>> +++ b/drivers/media/i2c/ov8856.c

>> @@ -126,6 +126,9 @@ struct ov8856_mode {

>>

>>          /* Sensor register settings for this resolution */

>>          const struct ov8856_reg_list reg_list;

>> +

>> +       /* MEDIA_BUS_FMT for this mode */

>> +       u32 code;

>>   };

>>

>>   static const struct ov8856_reg mipi_data_rate_720mbps[] = {

>> @@ -942,6 +945,11 @@ static const char * const ov8856_test_pattern_menu[] = {

>>          "Bottom-Top Darker Color Bar"

>>   };

>>

>> +static const u32 ov8856_formats[] = {

>> +       MEDIA_BUS_FMT_SBGGR10_1X10,

>> +       MEDIA_BUS_FMT_SGRBG10_1X10,

>> +};

>> +

>>   static const s64 link_freq_menu_items[] = {

>>          OV8856_LINK_FREQ_360MHZ,

>>          OV8856_LINK_FREQ_180MHZ

>> @@ -974,6 +982,7 @@ static const struct ov8856_mode supported_modes[] = {

>>                          .regs = mode_3280x2464_regs,

>>                  },

>>                  .link_freq_index = OV8856_LINK_FREQ_720MBPS,

>> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

>>          },

>>          {

>>                  .width = 3264,

>> @@ -986,6 +995,7 @@ static const struct ov8856_mode supported_modes[] = {

>>                          .regs = mode_3264x2448_regs,

>>                  },

>>                  .link_freq_index = OV8856_LINK_FREQ_720MBPS,

>> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

>>          },

>>          {

>>                  .width = 1640,

>> @@ -998,6 +1008,7 @@ static const struct ov8856_mode supported_modes[] = {

>>                          .regs = mode_1640x1232_regs,

>>                  },

>>                  .link_freq_index = OV8856_LINK_FREQ_360MBPS,

>> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

>>          },

>>          {

>>                  .width = 1632,

>> @@ -1010,6 +1021,7 @@ static const struct ov8856_mode supported_modes[] = {

>>                          .regs = mode_1632x1224_regs,

>>                  },

>>                  .link_freq_index = OV8856_LINK_FREQ_360MBPS,

>> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

>>          }

>>   };

>>

>> @@ -1281,8 +1293,8 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode,

>>   {

>>          fmt->width = mode->width;

>>          fmt->height = mode->height;

>> -       fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;

>>          fmt->field = V4L2_FIELD_NONE;

>> +       fmt->code = mode->code;

>>   }

>>

>>   static int ov8856_start_streaming(struct ov8856 *ov8856)

>> @@ -1519,11 +1531,10 @@ static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,

>>                                   struct v4l2_subdev_pad_config *cfg,

>>                                   struct v4l2_subdev_mbus_code_enum *code)

>>   {

>> -       /* Only one bayer order GRBG is supported */

>> -       if (code->index > 0)

>> +       if (code->index >= ARRAY_SIZE(ov8856_formats))

>>                  return -EINVAL;

>>

>> -       code->code = MEDIA_BUS_FMT_SGRBG10_1X10;

>> +       code->code = ov8856_formats[code->index];

>>

>>          return 0;

>>   }

>> @@ -1532,10 +1543,11 @@ static int ov8856_enum_frame_size(struct v4l2_subdev *sd,

>>                                    struct v4l2_subdev_pad_config *cfg,

>>                                    struct v4l2_subdev_frame_size_enum *fse)

>>   {

>> -       if (fse->index >= ARRAY_SIZE(supported_modes))

>> +       if ((fse->code != ov8856_formats[0]) &&

>> +           (fse->code != ov8856_formats[1]))

> 

> Shouldn't this be validated against the current mode? I guess it's the

> question about which part of the state takes precedence - the mbus

> code or the frame size.


The docs [1] say "enumerate all frame sizes supported by a sub-device on the given pad
for the given media bus format". It doesn't seem to mention the current mode. But the
frame sizes reported should be filtered by the mbus code, and this patch misses that
if I read it correct.

But this situation when the mbus code depends on the mode (on the resolution in fact)...
Yes, if we read the pixels from a rectangle smaller than the active area, we can change
the bayer order by moving this "read-out" rectangle by one pixel along x, y, or both x
and y axes. But wouldn't it be better if we try to review the register setting for the
current modes so that the bayer order would be the same for all the modes?

Thanks,
Andrey

> Best regards,

> Tomasz

> 


[1] https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/vidioc-subdev-enum-frame-size.html
Andrey Konovalov Jan. 8, 2021, 11:28 a.m. UTC | #3
Hi Robert,

On 08.01.2021 13:46, Andrey Konovalov wrote:
> Hi Robert and Tomasz,

> 

> On 08.01.2021 12:49, Tomasz Figa wrote:

>> Hi Robert,

>>

>> On Thu, Jan 7, 2021 at 11:21 PM Robert Foss <robert.foss@linaro.org> wrote:

>>>

>>> The Bayer GRBG10 mode used for earlier modes 3280x2460 and

>>> 1640x1232 isn't the mode output by the sensor for the

>>> 3264x2448 and 1632x1224 modes.

>>>

>>> Switch from MEDIA_BUS_FMT_SGRBG10_1X10 to MEDIA_BUS_FMT_SBGGR10_1X10

>>> for 3264x2448 & 1632x1224 modes.

>>>

>>> Signed-off-by: Robert Foss <robert.foss@linaro.org>

>>> ---

>>>

>>> Changes since v1:

>>>   - Sakari: Added mode information to ov8856_mode struct

>>>   - Sakari: enum_mbus_code updated

>>>

>>>   drivers/media/i2c/ov8856.c | 24 ++++++++++++++++++------

>>>   1 file changed, 18 insertions(+), 6 deletions(-)

>>>

>>> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c

>>> index 2f4ceaa80593..7cd83564585c 100644

>>> --- a/drivers/media/i2c/ov8856.c

>>> +++ b/drivers/media/i2c/ov8856.c

>>> @@ -126,6 +126,9 @@ struct ov8856_mode {

>>>

>>>          /* Sensor register settings for this resolution */

>>>          const struct ov8856_reg_list reg_list;

>>> +

>>> +       /* MEDIA_BUS_FMT for this mode */

>>> +       u32 code;

>>>   };

>>>

>>>   static const struct ov8856_reg mipi_data_rate_720mbps[] = {

>>> @@ -942,6 +945,11 @@ static const char * const ov8856_test_pattern_menu[] = {

>>>          "Bottom-Top Darker Color Bar"

>>>   };

>>>

>>> +static const u32 ov8856_formats[] = {

>>> +       MEDIA_BUS_FMT_SBGGR10_1X10,

>>> +       MEDIA_BUS_FMT_SGRBG10_1X10,

>>> +};

>>> +

>>>   static const s64 link_freq_menu_items[] = {

>>>          OV8856_LINK_FREQ_360MHZ,

>>>          OV8856_LINK_FREQ_180MHZ

>>> @@ -974,6 +982,7 @@ static const struct ov8856_mode supported_modes[] = {

>>>                          .regs = mode_3280x2464_regs,

>>>                  },

>>>                  .link_freq_index = OV8856_LINK_FREQ_720MBPS,

>>> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

>>>          },

>>>          {

>>>                  .width = 3264,

>>> @@ -986,6 +995,7 @@ static const struct ov8856_mode supported_modes[] = {

>>>                          .regs = mode_3264x2448_regs,

>>>                  },

>>>                  .link_freq_index = OV8856_LINK_FREQ_720MBPS,

>>> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

>>>          },

>>>          {

>>>                  .width = 1640,

>>> @@ -998,6 +1008,7 @@ static const struct ov8856_mode supported_modes[] = {

>>>                          .regs = mode_1640x1232_regs,

>>>                  },

>>>                  .link_freq_index = OV8856_LINK_FREQ_360MBPS,

>>> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

>>>          },

>>>          {

>>>                  .width = 1632,

>>> @@ -1010,6 +1021,7 @@ static const struct ov8856_mode supported_modes[] = {

>>>                          .regs = mode_1632x1224_regs,

>>>                  },

>>>                  .link_freq_index = OV8856_LINK_FREQ_360MBPS,

>>> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

>>>          }

>>>   };

>>>

>>> @@ -1281,8 +1293,8 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode,

>>>   {

>>>          fmt->width = mode->width;

>>>          fmt->height = mode->height;

>>> -       fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;

>>>          fmt->field = V4L2_FIELD_NONE;

>>> +       fmt->code = mode->code;

>>>   }

>>>

>>>   static int ov8856_start_streaming(struct ov8856 *ov8856)

>>> @@ -1519,11 +1531,10 @@ static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,

>>>                                   struct v4l2_subdev_pad_config *cfg,

>>>                                   struct v4l2_subdev_mbus_code_enum *code)

>>>   {

>>> -       /* Only one bayer order GRBG is supported */

>>> -       if (code->index > 0)

>>> +       if (code->index >= ARRAY_SIZE(ov8856_formats))

>>>                  return -EINVAL;

>>>

>>> -       code->code = MEDIA_BUS_FMT_SGRBG10_1X10;

>>> +       code->code = ov8856_formats[code->index];

>>>

>>>          return 0;

>>>   }

>>> @@ -1532,10 +1543,11 @@ static int ov8856_enum_frame_size(struct v4l2_subdev *sd,

>>>                                    struct v4l2_subdev_pad_config *cfg,

>>>                                    struct v4l2_subdev_frame_size_enum *fse)

>>>   {

>>> -       if (fse->index >= ARRAY_SIZE(supported_modes))

>>> +       if ((fse->code != ov8856_formats[0]) &&

>>> +           (fse->code != ov8856_formats[1]))

>>

>> Shouldn't this be validated against the current mode? I guess it's the

>> question about which part of the state takes precedence - the mbus

>> code or the frame size.

> 

> The docs [1] say "enumerate all frame sizes supported by a sub-device on the given pad

> for the given media bus format". It doesn't seem to mention the current mode. But the

> frame sizes reported should be filtered by the mbus code, and this patch misses that

> if I read it correct.

> 

> But this situation when the mbus code depends on the mode (on the resolution in fact)...

> Yes, if we read the pixels from a rectangle smaller than the active area, we can change

> the bayer order by moving this "read-out" rectangle by one pixel along x, y, or both x

> and y axes. But wouldn't it be better if we try to review the register setting for the

> current modes so that the bayer order would be the same for all the modes?


This untested change should make the 3264x2448 and 1632x1224 modes to use
the GRBG bayer order (I would prefer BGGR as this is the "native" order of the pixel
array, but GRBG appeared in the driver first):

diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index d8cefd3d4045..b337f729d5e3 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -428,7 +428,7 @@ static const struct ov8856_reg mode_3264x2448_regs[] = {
         {0x3810, 0x00},
         {0x3811, 0x04},
         {0x3812, 0x00},
-       {0x3813, 0x02},
+       {0x3813, 0x01},
         {0x3814, 0x01},
         {0x3815, 0x01},
         {0x3816, 0x00},
@@ -821,7 +821,7 @@ static const struct ov8856_reg mode_1632x1224_regs[] = {
         {0x3810, 0x00},
         {0x3811, 0x02},
         {0x3812, 0x00},
-       {0x3813, 0x02},
+       {0x3813, 0x01},
         {0x3814, 0x03},
         {0x3815, 0x01},
         {0x3816, 0x00},


Thanks,
Andrey

> Thanks,

> Andrey

> 

>> Best regards,

>> Tomasz

>>

> 

> [1] https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/vidioc-subdev-enum-frame-size.html
Robert Foss Jan. 8, 2021, 2:55 p.m. UTC | #4
Hey Tomasz & Andrey,

On Fri, 8 Jan 2021 at 11:46, Andrey Konovalov
<andrey.konovalov@linaro.org> wrote:
>

> Hi Robert and Tomasz,

>

> On 08.01.2021 12:49, Tomasz Figa wrote:

> > Hi Robert,

> >

> > On Thu, Jan 7, 2021 at 11:21 PM Robert Foss <robert.foss@linaro.org> wrote:

> >>

> >> The Bayer GRBG10 mode used for earlier modes 3280x2460 and

> >> 1640x1232 isn't the mode output by the sensor for the

> >> 3264x2448 and 1632x1224 modes.

> >>

> >> Switch from MEDIA_BUS_FMT_SGRBG10_1X10 to MEDIA_BUS_FMT_SBGGR10_1X10

> >> for 3264x2448 & 1632x1224 modes.

> >>

> >> Signed-off-by: Robert Foss <robert.foss@linaro.org>

> >> ---

> >>

> >> Changes since v1:

> >>   - Sakari: Added mode information to ov8856_mode struct

> >>   - Sakari: enum_mbus_code updated

> >>

> >>   drivers/media/i2c/ov8856.c | 24 ++++++++++++++++++------

> >>   1 file changed, 18 insertions(+), 6 deletions(-)

> >>

> >> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c

> >> index 2f4ceaa80593..7cd83564585c 100644

> >> --- a/drivers/media/i2c/ov8856.c

> >> +++ b/drivers/media/i2c/ov8856.c

> >> @@ -126,6 +126,9 @@ struct ov8856_mode {

> >>

> >>          /* Sensor register settings for this resolution */

> >>          const struct ov8856_reg_list reg_list;

> >> +

> >> +       /* MEDIA_BUS_FMT for this mode */

> >> +       u32 code;

> >>   };

> >>

> >>   static const struct ov8856_reg mipi_data_rate_720mbps[] = {

> >> @@ -942,6 +945,11 @@ static const char * const ov8856_test_pattern_menu[] = {

> >>          "Bottom-Top Darker Color Bar"

> >>   };

> >>

> >> +static const u32 ov8856_formats[] = {

> >> +       MEDIA_BUS_FMT_SBGGR10_1X10,

> >> +       MEDIA_BUS_FMT_SGRBG10_1X10,

> >> +};

> >> +

> >>   static const s64 link_freq_menu_items[] = {

> >>          OV8856_LINK_FREQ_360MHZ,

> >>          OV8856_LINK_FREQ_180MHZ

> >> @@ -974,6 +982,7 @@ static const struct ov8856_mode supported_modes[] = {

> >>                          .regs = mode_3280x2464_regs,

> >>                  },

> >>                  .link_freq_index = OV8856_LINK_FREQ_720MBPS,

> >> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

> >>          },

> >>          {

> >>                  .width = 3264,

> >> @@ -986,6 +995,7 @@ static const struct ov8856_mode supported_modes[] = {

> >>                          .regs = mode_3264x2448_regs,

> >>                  },

> >>                  .link_freq_index = OV8856_LINK_FREQ_720MBPS,

> >> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

> >>          },

> >>          {

> >>                  .width = 1640,

> >> @@ -998,6 +1008,7 @@ static const struct ov8856_mode supported_modes[] = {

> >>                          .regs = mode_1640x1232_regs,

> >>                  },

> >>                  .link_freq_index = OV8856_LINK_FREQ_360MBPS,

> >> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

> >>          },

> >>          {

> >>                  .width = 1632,

> >> @@ -1010,6 +1021,7 @@ static const struct ov8856_mode supported_modes[] = {

> >>                          .regs = mode_1632x1224_regs,

> >>                  },

> >>                  .link_freq_index = OV8856_LINK_FREQ_360MBPS,

> >> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

> >>          }

> >>   };

> >>

> >> @@ -1281,8 +1293,8 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode,

> >>   {

> >>          fmt->width = mode->width;

> >>          fmt->height = mode->height;

> >> -       fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;

> >>          fmt->field = V4L2_FIELD_NONE;

> >> +       fmt->code = mode->code;

> >>   }

> >>

> >>   static int ov8856_start_streaming(struct ov8856 *ov8856)

> >> @@ -1519,11 +1531,10 @@ static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,

> >>                                   struct v4l2_subdev_pad_config *cfg,

> >>                                   struct v4l2_subdev_mbus_code_enum *code)

> >>   {

> >> -       /* Only one bayer order GRBG is supported */

> >> -       if (code->index > 0)

> >> +       if (code->index >= ARRAY_SIZE(ov8856_formats))

> >>                  return -EINVAL;

> >>

> >> -       code->code = MEDIA_BUS_FMT_SGRBG10_1X10;

> >> +       code->code = ov8856_formats[code->index];

> >>

> >>          return 0;

> >>   }

> >> @@ -1532,10 +1543,11 @@ static int ov8856_enum_frame_size(struct v4l2_subdev *sd,

> >>                                    struct v4l2_subdev_pad_config *cfg,

> >>                                    struct v4l2_subdev_frame_size_enum *fse)

> >>   {

> >> -       if (fse->index >= ARRAY_SIZE(supported_modes))

> >> +       if ((fse->code != ov8856_formats[0]) &&

> >> +           (fse->code != ov8856_formats[1]))

> >

> > Shouldn't this be validated against the current mode? I guess it's the

> > question about which part of the state takes precedence - the mbus

> > code or the frame size.

>

> The docs [1] say "enumerate all frame sizes supported by a sub-device on the given pad

> for the given media bus format". It doesn't seem to mention the current mode. But the

> frame sizes reported should be filtered by the mbus code, and this patch misses that

> if I read it correct.


I was trying to grok this, and looking at the other sensor drivers
didn't provide much
guidance so your input is very welcome.

>

> But this situation when the mbus code depends on the mode (on the resolution in fact)...

> Yes, if we read the pixels from a rectangle smaller than the active area, we can change

> the bayer order by moving this "read-out" rectangle by one pixel along x, y, or both x

> and y axes. But wouldn't it be better if we try to review the register setting for the

> current modes so that the bayer order would be the same for all the modes?

>

> Thanks,

> Andrey

>

> > Best regards,

> > Tomasz

> >

>

> [1] https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/vidioc-subdev-enum-frame-size.html
Robert Foss Jan. 8, 2021, 2:56 p.m. UTC | #5
On Fri, 8 Jan 2021 at 12:28, Andrey Konovalov
<andrey.konovalov@linaro.org> wrote:
>

> Hi Robert,

>

> On 08.01.2021 13:46, Andrey Konovalov wrote:

> > Hi Robert and Tomasz,

> >

> > On 08.01.2021 12:49, Tomasz Figa wrote:

> >> Hi Robert,

> >>

> >> On Thu, Jan 7, 2021 at 11:21 PM Robert Foss <robert.foss@linaro.org> wrote:

> >>>

> >>> The Bayer GRBG10 mode used for earlier modes 3280x2460 and

> >>> 1640x1232 isn't the mode output by the sensor for the

> >>> 3264x2448 and 1632x1224 modes.

> >>>

> >>> Switch from MEDIA_BUS_FMT_SGRBG10_1X10 to MEDIA_BUS_FMT_SBGGR10_1X10

> >>> for 3264x2448 & 1632x1224 modes.

> >>>

> >>> Signed-off-by: Robert Foss <robert.foss@linaro.org>

> >>> ---

> >>>

> >>> Changes since v1:

> >>>   - Sakari: Added mode information to ov8856_mode struct

> >>>   - Sakari: enum_mbus_code updated

> >>>

> >>>   drivers/media/i2c/ov8856.c | 24 ++++++++++++++++++------

> >>>   1 file changed, 18 insertions(+), 6 deletions(-)

> >>>

> >>> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c

> >>> index 2f4ceaa80593..7cd83564585c 100644

> >>> --- a/drivers/media/i2c/ov8856.c

> >>> +++ b/drivers/media/i2c/ov8856.c

> >>> @@ -126,6 +126,9 @@ struct ov8856_mode {

> >>>

> >>>          /* Sensor register settings for this resolution */

> >>>          const struct ov8856_reg_list reg_list;

> >>> +

> >>> +       /* MEDIA_BUS_FMT for this mode */

> >>> +       u32 code;

> >>>   };

> >>>

> >>>   static const struct ov8856_reg mipi_data_rate_720mbps[] = {

> >>> @@ -942,6 +945,11 @@ static const char * const ov8856_test_pattern_menu[] = {

> >>>          "Bottom-Top Darker Color Bar"

> >>>   };

> >>>

> >>> +static const u32 ov8856_formats[] = {

> >>> +       MEDIA_BUS_FMT_SBGGR10_1X10,

> >>> +       MEDIA_BUS_FMT_SGRBG10_1X10,

> >>> +};

> >>> +

> >>>   static const s64 link_freq_menu_items[] = {

> >>>          OV8856_LINK_FREQ_360MHZ,

> >>>          OV8856_LINK_FREQ_180MHZ

> >>> @@ -974,6 +982,7 @@ static const struct ov8856_mode supported_modes[] = {

> >>>                          .regs = mode_3280x2464_regs,

> >>>                  },

> >>>                  .link_freq_index = OV8856_LINK_FREQ_720MBPS,

> >>> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

> >>>          },

> >>>          {

> >>>                  .width = 3264,

> >>> @@ -986,6 +995,7 @@ static const struct ov8856_mode supported_modes[] = {

> >>>                          .regs = mode_3264x2448_regs,

> >>>                  },

> >>>                  .link_freq_index = OV8856_LINK_FREQ_720MBPS,

> >>> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

> >>>          },

> >>>          {

> >>>                  .width = 1640,

> >>> @@ -998,6 +1008,7 @@ static const struct ov8856_mode supported_modes[] = {

> >>>                          .regs = mode_1640x1232_regs,

> >>>                  },

> >>>                  .link_freq_index = OV8856_LINK_FREQ_360MBPS,

> >>> +               .code = MEDIA_BUS_FMT_SGRBG10_1X10,

> >>>          },

> >>>          {

> >>>                  .width = 1632,

> >>> @@ -1010,6 +1021,7 @@ static const struct ov8856_mode supported_modes[] = {

> >>>                          .regs = mode_1632x1224_regs,

> >>>                  },

> >>>                  .link_freq_index = OV8856_LINK_FREQ_360MBPS,

> >>> +               .code = MEDIA_BUS_FMT_SBGGR10_1X10,

> >>>          }

> >>>   };

> >>>

> >>> @@ -1281,8 +1293,8 @@ static void ov8856_update_pad_format(const struct ov8856_mode *mode,

> >>>   {

> >>>          fmt->width = mode->width;

> >>>          fmt->height = mode->height;

> >>> -       fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;

> >>>          fmt->field = V4L2_FIELD_NONE;

> >>> +       fmt->code = mode->code;

> >>>   }

> >>>

> >>>   static int ov8856_start_streaming(struct ov8856 *ov8856)

> >>> @@ -1519,11 +1531,10 @@ static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,

> >>>                                   struct v4l2_subdev_pad_config *cfg,

> >>>                                   struct v4l2_subdev_mbus_code_enum *code)

> >>>   {

> >>> -       /* Only one bayer order GRBG is supported */

> >>> -       if (code->index > 0)

> >>> +       if (code->index >= ARRAY_SIZE(ov8856_formats))

> >>>                  return -EINVAL;

> >>>

> >>> -       code->code = MEDIA_BUS_FMT_SGRBG10_1X10;

> >>> +       code->code = ov8856_formats[code->index];

> >>>

> >>>          return 0;

> >>>   }

> >>> @@ -1532,10 +1543,11 @@ static int ov8856_enum_frame_size(struct v4l2_subdev *sd,

> >>>                                    struct v4l2_subdev_pad_config *cfg,

> >>>                                    struct v4l2_subdev_frame_size_enum *fse)

> >>>   {

> >>> -       if (fse->index >= ARRAY_SIZE(supported_modes))

> >>> +       if ((fse->code != ov8856_formats[0]) &&

> >>> +           (fse->code != ov8856_formats[1]))

> >>

> >> Shouldn't this be validated against the current mode? I guess it's the

> >> question about which part of the state takes precedence - the mbus

> >> code or the frame size.

> >

> > The docs [1] say "enumerate all frame sizes supported by a sub-device on the given pad

> > for the given media bus format". It doesn't seem to mention the current mode. But the

> > frame sizes reported should be filtered by the mbus code, and this patch misses that

> > if I read it correct.

> >

> > But this situation when the mbus code depends on the mode (on the resolution in fact)...

> > Yes, if we read the pixels from a rectangle smaller than the active area, we can change

> > the bayer order by moving this "read-out" rectangle by one pixel along x, y, or both x

> > and y axes. But wouldn't it be better if we try to review the register setting for the

> > current modes so that the bayer order would be the same for all the modes?

>

> This untested change should make the 3264x2448 and 1632x1224 modes to use

> the GRBG bayer order (I would prefer BGGR as this is the "native" order of the pixel

> array, but GRBG appeared in the driver first):

>

> diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c

> index d8cefd3d4045..b337f729d5e3 100644

> --- a/drivers/media/i2c/ov8856.c

> +++ b/drivers/media/i2c/ov8856.c

> @@ -428,7 +428,7 @@ static const struct ov8856_reg mode_3264x2448_regs[] = {

>          {0x3810, 0x00},

>          {0x3811, 0x04},

>          {0x3812, 0x00},

> -       {0x3813, 0x02},

> +       {0x3813, 0x01},

>          {0x3814, 0x01},

>          {0x3815, 0x01},

>          {0x3816, 0x00},

> @@ -821,7 +821,7 @@ static const struct ov8856_reg mode_1632x1224_regs[] = {

>          {0x3810, 0x00},

>          {0x3811, 0x02},

>          {0x3812, 0x00},

> -       {0x3813, 0x02},

> +       {0x3813, 0x01},

>          {0x3814, 0x03},

>          {0x3815, 0x01},

>          {0x3816, 0x00},

>

>


This seems like the most elegant solution possible, thanks for suggesting it.
I'll verify that it works as expected on the db845c.
diff mbox series

Patch

diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c
index 2f4ceaa80593..7cd83564585c 100644
--- a/drivers/media/i2c/ov8856.c
+++ b/drivers/media/i2c/ov8856.c
@@ -126,6 +126,9 @@  struct ov8856_mode {
 
 	/* Sensor register settings for this resolution */
 	const struct ov8856_reg_list reg_list;
+
+	/* MEDIA_BUS_FMT for this mode */
+	u32 code;
 };
 
 static const struct ov8856_reg mipi_data_rate_720mbps[] = {
@@ -942,6 +945,11 @@  static const char * const ov8856_test_pattern_menu[] = {
 	"Bottom-Top Darker Color Bar"
 };
 
+static const u32 ov8856_formats[] = {
+	MEDIA_BUS_FMT_SBGGR10_1X10,
+	MEDIA_BUS_FMT_SGRBG10_1X10,
+};
+
 static const s64 link_freq_menu_items[] = {
 	OV8856_LINK_FREQ_360MHZ,
 	OV8856_LINK_FREQ_180MHZ
@@ -974,6 +982,7 @@  static const struct ov8856_mode supported_modes[] = {
 			.regs = mode_3280x2464_regs,
 		},
 		.link_freq_index = OV8856_LINK_FREQ_720MBPS,
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
 	},
 	{
 		.width = 3264,
@@ -986,6 +995,7 @@  static const struct ov8856_mode supported_modes[] = {
 			.regs = mode_3264x2448_regs,
 		},
 		.link_freq_index = OV8856_LINK_FREQ_720MBPS,
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
 	},
 	{
 		.width = 1640,
@@ -998,6 +1008,7 @@  static const struct ov8856_mode supported_modes[] = {
 			.regs = mode_1640x1232_regs,
 		},
 		.link_freq_index = OV8856_LINK_FREQ_360MBPS,
+		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
 	},
 	{
 		.width = 1632,
@@ -1010,6 +1021,7 @@  static const struct ov8856_mode supported_modes[] = {
 			.regs = mode_1632x1224_regs,
 		},
 		.link_freq_index = OV8856_LINK_FREQ_360MBPS,
+		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
 	}
 };
 
@@ -1281,8 +1293,8 @@  static void ov8856_update_pad_format(const struct ov8856_mode *mode,
 {
 	fmt->width = mode->width;
 	fmt->height = mode->height;
-	fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
 	fmt->field = V4L2_FIELD_NONE;
+	fmt->code = mode->code;
 }
 
 static int ov8856_start_streaming(struct ov8856 *ov8856)
@@ -1519,11 +1531,10 @@  static int ov8856_enum_mbus_code(struct v4l2_subdev *sd,
 				 struct v4l2_subdev_pad_config *cfg,
 				 struct v4l2_subdev_mbus_code_enum *code)
 {
-	/* Only one bayer order GRBG is supported */
-	if (code->index > 0)
+	if (code->index >= ARRAY_SIZE(ov8856_formats))
 		return -EINVAL;
 
-	code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+	code->code = ov8856_formats[code->index];
 
 	return 0;
 }
@@ -1532,10 +1543,11 @@  static int ov8856_enum_frame_size(struct v4l2_subdev *sd,
 				  struct v4l2_subdev_pad_config *cfg,
 				  struct v4l2_subdev_frame_size_enum *fse)
 {
-	if (fse->index >= ARRAY_SIZE(supported_modes))
+	if ((fse->code != ov8856_formats[0]) &&
+	    (fse->code != ov8856_formats[1]))
 		return -EINVAL;
 
-	if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+	if (fse->index >= ARRAY_SIZE(supported_modes))
 		return -EINVAL;
 
 	fse->min_width = supported_modes[fse->index].width;