| Message ID | 20210111151651.1616813-7-vkoul@kernel.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add and enable GPI DMA users | expand |
On Mon 11 Jan 09:16 CST 2021, Vinod Koul wrote: > This add the device node for gpi dma0 instances found in sdm845. I think the 0 in "dma0" should go? Apart from that, this looks good. > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 46 ++++++++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index bcf888381f14..c9a127bbd606 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -1114,6 +1114,29 @@ opp-128000000 { > }; > }; > > + gpi_dma0: dma-controller@800000 { > + #dma-cells = <3>; Nit. I know #dma-cells are important to you ;) but I would prefer to have the standard properties (e.g. compatible) first. Regards, Bjorn > + compatible = "qcom,sdm845-gpi-dma"; > + reg = <0 0x00800000 0 0x60000>; > + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; > + dma-channels = <13>; > + dma-channel-mask = <0xfa>; > + iommus = <&apps_smmu 0x0016 0x0>; > + status = "disabled"; > + }; > + > qupv3_id_0: geniqup@8c0000 { > compatible = "qcom,geni-se-qup"; > reg = <0 0x008c0000 0 0x6000>; > @@ -1533,6 +1556,29 @@ uart7: serial@89c000 { > }; > }; > > + gpi_dma1: dma-controller@0xa00000 { > + #dma-cells = <3>; > + compatible = "qcom,sdm845-gpi-dma"; > + reg = <0 0x00a00000 0 0x60000>; > + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; > + dma-channels = <13>; > + dma-channel-mask = <0xfa>; > + iommus = <&apps_smmu 0x06d6 0x0>; > + status = "disabled"; > + }; > + > qupv3_id_1: geniqup@ac0000 { > compatible = "qcom,geni-se-qup"; > reg = <0 0x00ac0000 0 0x6000>; > -- > 2.26.2 >
On 11-01-21, 12:23, Bjorn Andersson wrote: > On Mon 11 Jan 09:16 CST 2021, Vinod Koul wrote: > > > This add the device node for gpi dma0 instances found in sdm845. > > I think the 0 in "dma0" should go? oops, will update > > Apart from that, this looks good. > > > > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > > --- > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 46 ++++++++++++++++++++++++++++ > > 1 file changed, 46 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > index bcf888381f14..c9a127bbd606 100644 > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > @@ -1114,6 +1114,29 @@ opp-128000000 { > > }; > > }; > > > > + gpi_dma0: dma-controller@800000 { > > + #dma-cells = <3>; > > Nit. I know #dma-cells are important to you ;) but I would prefer to > have the standard properties (e.g. compatible) first. Yes will reorder -- ~Vinod
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index bcf888381f14..c9a127bbd606 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1114,6 +1114,29 @@ opp-128000000 { }; }; + gpi_dma0: dma-controller@800000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x0016 0x0>; + status = "disabled"; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -1533,6 +1556,29 @@ uart7: serial@89c000 { }; }; + gpi_dma1: dma-controller@0xa00000 { + #dma-cells = <3>; + compatible = "qcom,sdm845-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + dma-channels = <13>; + dma-channel-mask = <0xfa>; + iommus = <&apps_smmu 0x06d6 0x0>; + status = "disabled"; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x00ac0000 0 0x6000>;
This add the device node for gpi dma0 instances found in sdm845. Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 46 ++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) -- 2.26.2