diff mbox series

USB: otg: Fix error 32 when enable hardware flow control.

Message ID C429CBAD-FE44-42AE-909C-4C33052A7413@silabs.com
State New
Headers show
Series USB: otg: Fix error 32 when enable hardware flow control. | expand

Commit Message

Pho Tran Jan. 11, 2021, 4:55 a.m. UTC
When hardware flow control is enabled,
don't allow host send MHS command to cp210x.

Signed-off-by: Pho Tran<pho.tran@silabs.com>
---
 drivers/usb/serial/cp210x.c | 32 +++++++++++++++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

Comments

Greg Kroah-Hartman Jan. 11, 2021, 7:14 a.m. UTC | #1
On Mon, Jan 11, 2021 at 04:55:22AM +0000, Pho Tran wrote:
> When hardware flow control is enabled,
> don't allow host send MHS command to cp210x.
> 
> Signed-off-by: Pho Tran<pho.tran@silabs.com>

Nit, you need a ' ' before the '<' character.

And why didn't you send this to the maintainer of this file as described
by scripts/get_maintainer.pl?

Please do so when you fix things up and send the next version.

> ---
>  drivers/usb/serial/cp210x.c | 32 +++++++++++++++++++++++++++++++-
>  1 file changed, 31 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
> index fbb10dfc56e3..f231cecdaf7d 100644
> --- a/drivers/usb/serial/cp210x.c
> +++ b/drivers/usb/serial/cp210x.c
> @@ -1204,6 +1204,7 @@ static int cp210x_tiocmset(struct tty_struct *tty,
>  		unsigned int set, unsigned int clear)
>  {
>  	struct usb_serial_port *port = tty->driver_data;
> +
>  	return cp210x_tiocmset_port(port, set, clear);
>  }
>  

Unneeded change :(


> @@ -1211,6 +1212,11 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
>  		unsigned int set, unsigned int clear)
>  {
>  	u16 control = 0;
> +	struct cp210x_flow_ctl flow_ctl;
> +	u32 ctl_hs = 0;
> +	u32 flow_repl = 0;
> +	bool auto_dtr = false;
> +	bool auto_rts = false;
>  
>  	if (set & TIOCM_RTS) {
>  		control |= CONTROL_RTS;
> @@ -1230,6 +1236,30 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
>  	}
>  
>  	dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
> +	/*
> +	 *	Don't send MHS command if device in hardware flowcontrol mode
> +	 */

Why the giant comment?

> +	cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
> +				sizeof(flow_ctl));
> +	ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
> +	flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
> +
> +	if (CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_FLOW_CTL)
> +		== (ctl_hs & CP210X_SERIAL_DTR_MASK))

Very odd indentation :(

> +		auto_dtr = true;
> +	else
> +		auto_dtr = false;
> +
> +	if (CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL)
> +		== (flow_repl & CP210X_SERIAL_RTS_MASK))
> +		auto_rts = true;
> +	else
> +		auto_rts = false;
> +
> +	if (auto_dtr || auto_rts) {
> +		dev_dbg(&port->dev, "Don't set MHS when while device in flow control mode\n");
> +		return 0;
> +	}
>  
>  	return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
>  }
> @@ -1256,7 +1286,7 @@ static int cp210x_tiocmget(struct tty_struct *tty)
>  		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
>  		|((control & CONTROL_CTS) ? TIOCM_CTS : 0)
>  		|((control & CONTROL_DSR) ? TIOCM_DSR : 0)
> -		|((control & CONTROL_RING)? TIOCM_RI  : 0)
> +		|((control & CONTROL_RING) ? TIOCM_RI  : 0)

Do not mix whitespace changes with logic changes in the same patch, that
is a sure way to get your patch rejected.

thanks,

greg k-h
Johan Hovold Jan. 11, 2021, 10:16 a.m. UTC | #2
On Mon, Jan 11, 2021 at 04:55:22AM +0000, Pho Tran wrote:
> When hardware flow control is enabled,
> don't allow host send MHS command to cp210x.

You're commit message needs to explain *why* this is needed (and not
just say *what* the patch does).
 
> Signed-off-by: Pho Tran<pho.tran@silabs.com>

Also fix up the Subject prefix.

Johan
diff mbox series

Patch

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index fbb10dfc56e3..f231cecdaf7d 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1204,6 +1204,7 @@  static int cp210x_tiocmset(struct tty_struct *tty,
 		unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
+
 	return cp210x_tiocmset_port(port, set, clear);
 }
 
@@ -1211,6 +1212,11 @@  static int cp210x_tiocmset_port(struct usb_serial_port *port,
 		unsigned int set, unsigned int clear)
 {
 	u16 control = 0;
+	struct cp210x_flow_ctl flow_ctl;
+	u32 ctl_hs = 0;
+	u32 flow_repl = 0;
+	bool auto_dtr = false;
+	bool auto_rts = false;
 
 	if (set & TIOCM_RTS) {
 		control |= CONTROL_RTS;
@@ -1230,6 +1236,30 @@  static int cp210x_tiocmset_port(struct usb_serial_port *port,
 	}
 
 	dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
+	/*
+	 *	Don't send MHS command if device in hardware flowcontrol mode
+	 */
+	cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
+				sizeof(flow_ctl));
+	ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
+	flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
+
+	if (CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_FLOW_CTL)
+		== (ctl_hs & CP210X_SERIAL_DTR_MASK))
+		auto_dtr = true;
+	else
+		auto_dtr = false;
+
+	if (CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL)
+		== (flow_repl & CP210X_SERIAL_RTS_MASK))
+		auto_rts = true;
+	else
+		auto_rts = false;
+
+	if (auto_dtr || auto_rts) {
+		dev_dbg(&port->dev, "Don't set MHS when while device in flow control mode\n");
+		return 0;
+	}
 
 	return cp210x_write_u16_reg(port, CP210X_SET_MHS, control);
 }
@@ -1256,7 +1286,7 @@  static int cp210x_tiocmget(struct tty_struct *tty)
 		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
 		|((control & CONTROL_CTS) ? TIOCM_CTS : 0)
 		|((control & CONTROL_DSR) ? TIOCM_DSR : 0)
-		|((control & CONTROL_RING)? TIOCM_RI  : 0)
+		|((control & CONTROL_RING) ? TIOCM_RI  : 0)
 		|((control & CONTROL_DCD) ? TIOCM_CD  : 0);
 
 	dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control);