[v3,3/3] ARM: Add Hisilicon L3 cache controller support

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 02692fbe2db5c59..73cd28419d731df 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -1070,6 +1070,15 @@  config CACHE_XSC3L2
 	help
 	  This option enables the L2 cache on XScale3.
 
+config CACHE_HISI_L3
+	bool "Enable the L3 cache on Hisilicon SoCs"
+	depends on ARCH_HISI && OF
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the L3 cache on Hisilicon SoCs. It supports a maximum
+	  of 36-bit physical addresses.
+
 config ARM_L1_CACHE_SHIFT_6
 	bool
 	default y if CPU_V7
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 3510503bc5e688b..745d55ecb2ed4fd 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -112,6 +112,7 @@  obj-$(CONFIG_CACHE_L2X0_PMU)	+= cache-l2x0-pmu.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
 obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
 obj-$(CONFIG_CACHE_UNIPHIER)	+= cache-uniphier.o
+obj-$(CONFIG_CACHE_HISI_L3)	+= cache-hisi-l3.o
 
 KASAN_SANITIZE_kasan_init.o	:= n
 obj-$(CONFIG_KASAN)		+= kasan_init.o
diff --git a/arch/arm/mm/cache-hisi-l3.c b/arch/arm/mm/cache-hisi-l3.c
new file mode 100644
index 000000000000000..7aa590f378a1ef3
--- /dev/null
+++ b/arch/arm/mm/cache-hisi-l3.c
@@ -0,0 +1,153 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Hisilicon Limited.
+ */
+
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+
+#include "cache-hisi-l3.h"
+
+static DEFINE_SPINLOCK(l3cache_lock);
+static void __iomem *l3_ctrl_base;
+
+
+static void l3cache_maint_common(u32 range, u32 op_type)
+{
+	u32 reg;
+
+	reg = readl(l3_ctrl_base + L3_MAINT_CTRL);
+	reg &= ~(L3_MAINT_RANGE_MASK | L3_MAINT_TYPE_MASK);
+	reg |= range | op_type;
+	reg |= L3_MAINT_STATUS_START;
+	writel(reg, l3_ctrl_base + L3_MAINT_CTRL);
+
+	/* Wait until the hardware maintenance operation is complete. */
+	do {
+		cpu_relax();
+		reg = readl(l3_ctrl_base + L3_MAINT_CTRL);
+	} while ((reg & L3_MAINT_STATUS_MASK) != L3_MAINT_STATUS_END);
+}
+
+static void l3cache_maint_range(phys_addr_t start, phys_addr_t end, u32 op_type)
+{
+	start = start >> L3_CACHE_LINE_SHITF;
+	end = ((end - 1) >> L3_CACHE_LINE_SHITF) + 1;
+
+	writel(start, l3_ctrl_base + L3_MAINT_START);
+	writel(end, l3_ctrl_base + L3_MAINT_END);
+
+	l3cache_maint_common(L3_MAINT_RANGE_ADDR, op_type);
+}
+
+static inline void l3cache_flush_all_nolock(void)
+{
+	l3cache_maint_common(L3_MAINT_RANGE_ALL, L3_MAINT_TYPE_FLUSH);
+}
+
+static void l3cache_flush_all(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l3cache_lock, flags);
+	l3cache_flush_all_nolock();
+	spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static void l3cache_inv_range(phys_addr_t start, phys_addr_t end)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l3cache_lock, flags);
+	l3cache_maint_range(start, end, L3_MAINT_TYPE_INV);
+	spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static void l3cache_clean_range(phys_addr_t start, phys_addr_t end)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l3cache_lock, flags);
+	l3cache_maint_range(start, end, L3_MAINT_TYPE_CLEAN);
+	spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static void l3cache_flush_range(phys_addr_t start, phys_addr_t end)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l3cache_lock, flags);
+	l3cache_maint_range(start, end, L3_MAINT_TYPE_FLUSH);
+	spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static void l3cache_disable(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&l3cache_lock, flags);
+	l3cache_flush_all_nolock();
+	writel(L3_CTRL_DISABLE, l3_ctrl_base + L3_CTRL);
+	spin_unlock_irqrestore(&l3cache_lock, flags);
+}
+
+static const struct of_device_id l3cache_ids[] __initconst = {
+	{.compatible = "hisilicon,l3cache", .data = NULL},
+	{}
+};
+
+static int __init l3cache_init(void)
+{
+	u32 reg;
+	struct device_node *node;
+
+	node = of_find_matching_node(NULL, l3cache_ids);
+	if (!node)
+		return -ENODEV;
+
+	l3_ctrl_base = of_iomap(node, 0);
+	if (!l3_ctrl_base) {
+		pr_err("failed to map l3cache control registers\n");
+		return -ENOMEM;
+	}
+
+	reg = readl(l3_ctrl_base + L3_CTRL);
+	if (!(reg & L3_CTRL_ENABLE)) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&l3cache_lock, flags);
+
+		/*
+		 * Ensure that no L3 cache hardware maintenance operations are
+		 * being performed before enabling the L3 cache. Wait for it to
+		 * finish.
+		 */
+		do {
+			cpu_relax();
+			reg = readl(l3_ctrl_base + L3_MAINT_CTRL);
+		} while ((reg & L3_MAINT_STATUS_MASK) != L3_MAINT_STATUS_END);
+
+		reg = readl(l3_ctrl_base + L3_AUCTRL);
+		reg |= L3_AUCTRL_EVENT_EN | L3_AUCTRL_ECC_EN;
+		writel(reg, l3_ctrl_base + L3_AUCTRL);
+
+		writel(L3_CTRL_ENABLE, l3_ctrl_base + L3_CTRL);
+
+		spin_unlock_irqrestore(&l3cache_lock, flags);
+	}
+
+	outer_cache.inv_range = l3cache_inv_range;
+	outer_cache.clean_range = l3cache_clean_range;
+	outer_cache.flush_range = l3cache_flush_range;
+	outer_cache.flush_all = l3cache_flush_all;
+	outer_cache.disable = l3cache_disable;
+
+	pr_info("Hisilicon l3cache controller enabled\n");
+
+	return 0;
+}
+arch_initcall(l3cache_init);
diff --git a/arch/arm/mm/cache-hisi-l3.h b/arch/arm/mm/cache-hisi-l3.h
new file mode 100644
index 000000000000000..6ec3ee21ae01417
--- /dev/null
+++ b/arch/arm/mm/cache-hisi-l3.h
@@ -0,0 +1,30 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CACHE_HISI_L3_H
+#define __CACHE_HISI_L3_H
+
+#define L3_CACHE_LINE_SHITF		6
+
+#define L3_CTRL				0x0
+#define L3_CTRL_ENABLE			(1U << 0)
+#define L3_CTRL_DISABLE			(0U << 0)
+
+#define L3_AUCTRL			0x4
+#define L3_AUCTRL_EVENT_EN		BIT(23)
+#define L3_AUCTRL_ECC_EN		BIT(8)
+
+#define L3_MAINT_CTRL			0x20
+#define L3_MAINT_RANGE_MASK		GENMASK(3, 3)
+#define L3_MAINT_RANGE_ALL		(0U << 3)
+#define L3_MAINT_RANGE_ADDR		(1U << 3)
+#define L3_MAINT_TYPE_MASK		GENMASK(2, 1)
+#define L3_MAINT_TYPE_CLEAN		(1U << 1)
+#define L3_MAINT_TYPE_INV		(2U << 1)
+#define L3_MAINT_TYPE_FLUSH		(3U << 1)
+#define L3_MAINT_STATUS_MASK		GENMASK(0, 0)
+#define L3_MAINT_STATUS_START		(1U << 0)
+#define L3_MAINT_STATUS_END		(0U << 0)
+
+#define L3_MAINT_START			0x24
+#define L3_MAINT_END			0x28
+
+#endif