Message ID | 1610445628-29799-1-git-send-email-loic.poulain@linaro.org |
---|---|
State | Superseded |
Headers | show |
Series | mhi: Add tracepoints | expand |
On Tue, 12 Jan 2021 11:00:28 +0100 Loic Poulain <loic.poulain@linaro.org> wrote: > Add a set of tracepoints for reporting MHI events such as > MHI transfers, events, doorbell, etc... > > This can be used for debugging purpose. > > Signed-off-by: Loic Poulain <loic.poulain@linaro.org> > --- > drivers/bus/mhi/core/main.c | 12 +++++ > include/trace/events/mhi.h | 121 ++++++++++++++++++++++++++++++++++++++++++++ I would make the events/mhi.h file as drivers/bus/mhi/core/trace.h instead. See below. > 2 files changed, 133 insertions(+) > create mode 100644 include/trace/events/mhi.h > > diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c > index c1eb43d..312e4db 100644 > --- a/drivers/bus/mhi/core/main.c > +++ b/drivers/bus/mhi/core/main.c > @@ -15,6 +15,9 @@ > #include <linux/slab.h> > #include "internal.h" > > +#define CREATE_TRACE_POINTS > +#include <trace/events/mhi.h> > + > int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl, > void __iomem *base, u32 offset, u32 *out) > { > @@ -61,6 +64,8 @@ void mhi_write_reg_field(struct mhi_controller *mhi_cntrl, void __iomem *base, > void mhi_write_db(struct mhi_controller *mhi_cntrl, void __iomem *db_addr, > dma_addr_t db_val) > { > + trace_mhi_ring_doorbell(db_addr, db_val, mhi_cntrl); > + > mhi_write_reg(mhi_cntrl, db_addr, 4, upper_32_bits(db_val)); > mhi_write_reg(mhi_cntrl, db_addr, 0, lower_32_bits(db_val)); > } > @@ -118,6 +123,7 @@ void mhi_ring_chan_db(struct mhi_controller *mhi_cntrl, > */ > dma_wmb(); > *ring->ctxt_wp = db; > + trace_mhi_update_ring_wp(ring, mhi_cntrl); > > mhi_chan->db_cfg.process_db(mhi_cntrl, &mhi_chan->db_cfg, > ring->db_addr, db); > @@ -724,6 +730,8 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl, > while (dev_rp != local_rp) { > enum mhi_pkt_type type = MHI_TRE_GET_EV_TYPE(local_rp); > > + trace_mhi_event(local_rp, mhi_cntrl); > + > switch (type) { > case MHI_PKT_TYPE_BW_REQ_EVENT: > { > @@ -872,6 +880,8 @@ int mhi_process_data_event_ring(struct mhi_controller *mhi_cntrl, > > WARN_ON(chan >= mhi_cntrl->max_chan); > > + trace_mhi_event(local_rp, mhi_cntrl); > + > /* > * Only process the event ring elements whose channel > * ID is within the maximum supported range. > @@ -1098,6 +1108,8 @@ int mhi_gen_tre(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan, > mhi_add_ring_element(mhi_cntrl, tre_ring); > mhi_add_ring_element(mhi_cntrl, buf_ring); > > + trace_mhi_transfer(mhi_tre, mhi_cntrl, mhi_chan->chan); > + > return 0; > } > > diff --git a/include/trace/events/mhi.h b/include/trace/events/mhi.h > new file mode 100644 > index 0000000..903fdd4 > --- /dev/null > +++ b/include/trace/events/mhi.h > @@ -0,0 +1,121 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +#undef TRACE_SYSTEM > +#define TRACE_SYSTEM mhi > + > +#if !defined(_TRACE_MHI_H) || defined(TRACE_HEADER_MULTI_READ) > +#define _TRACE_MHI_H > + > +#include <linux/mhi.h> > +#include <linux/tracepoint.h> > + > +#include "../../drivers/bus/mhi/core/internal.h" Instead of adding the mhi.h file into the top level events directory, and doing the above path search, simply place this file in the drivers/bus/mhi/core directory as "trace.h". It would require adding: CFLAGS_main.o := -I$(src) in drivers/bus/mhi/core/Makefile and some updates at the end of this file (see below). > + > +TRACE_EVENT(mhi_transfer, > + > + TP_PROTO(struct mhi_tre *tre, struct mhi_controller *cntrl, u32 chan), > + > + TP_ARGS(tre, cntrl, chan), > + > + TP_STRUCT__entry( > + __field(int, cntrl_index) > + __field(u32, channel) > + __field(void *, treaddr) > + __field(u64, treptr) > + __field(u32, tredword0) > + __field(u32, tredword1) > + ), > + > + TP_fast_assign( > + __entry->cntrl_index = cntrl->index; > + __entry->channel = chan; > + __entry->treaddr = tre; > + __entry->treptr = tre->ptr; > + __entry->tredword0 = tre->dword[0]; > + __entry->tredword1 = tre->dword[1]; > + ), > + > + TP_printk("mhi%d.%u treaddr=%p treptr=%llx tredword0=%08x tredword1=%08x", > + __entry->cntrl_index, __entry->channel, __entry->treaddr, > + __entry->treptr, __entry->tredword0, __entry->tredword1) > +); > + > +TRACE_EVENT(mhi_update_ring_wp, > + > + TP_PROTO(struct mhi_ring *ring, struct mhi_controller *cntrl), > + > + TP_ARGS(ring, cntrl), > + > + TP_STRUCT__entry( > + __field(int, cntrl_index) > + __field(void *, ring) > + __field(void *, wp_host) > + __field(u64, wp_device) BTW, when possible, always place extra 32 bit types at the end if there's 64 bit types or long/pointer values. That is, if you can't pair two 32 bit types together, have the last one at the end of the TP_STRUCT. It will save 4 bytes in the ring buffer for archs that only need 4 byte alignment on 64 bit words. > + ), > + > + TP_fast_assign( > + __entry->cntrl_index = cntrl->index; > + __entry->ring = ring; > + __entry->wp_host = ring->wp; > + __entry->wp_device = *ring->ctxt_wp; > + ), > + > + TP_printk("mhi%d ringaddr=%p wp_host=%p wp_device=%llx", > + __entry->cntrl_index, __entry->ring, __entry->wp_host, > + __entry->wp_device) > +); > + > +TRACE_EVENT(mhi_ring_doorbell, > + > + TP_PROTO(void __iomem *db_addr, dma_addr_t db_val, struct mhi_controller *cntrl), > + > + TP_ARGS(db_addr, db_val, cntrl), > + > + TP_STRUCT__entry( > + __field(int, cntrl_index) > + __field(void *, dbaddr) > + __field(dma_addr_t, dbval) I don't know how big dma_addr_t is, but still I would place the int at the end. > + ), > + > + TP_fast_assign( > + __entry->cntrl_index = cntrl->index; > + __entry->dbaddr = db_addr; > + __entry->dbval = db_val; > + ), > + > + TP_printk("mhi%d dbaddr=%p dbval=%llx", __entry->cntrl_index, > + __entry->dbaddr, __entry->dbval) > +); > + > +TRACE_EVENT(mhi_event, > + > + TP_PROTO(struct mhi_tre *tre, struct mhi_controller *cntrl), > + > + TP_ARGS(tre, cntrl), > + > + TP_STRUCT__entry( > + __field(int, cntrl_index) > + __field(u32, channel) > + __field(unsigned int, type) One of the above int 32 bit types should go to the end. > + __field(u64, treptr) > + __field(u32, tredword0) > + __field(u32, tredword1) > + ), > + > + TP_fast_assign( > + __entry->cntrl_index = cntrl->index; > + __entry->channel = MHI_TRE_GET_EV_CHID(tre); > + __entry->type = MHI_TRE_GET_EV_TYPE(tre); > + __entry->treptr = tre->ptr; > + __entry->tredword0 = tre->dword[0]; > + __entry->tredword1 = tre->dword[1]; > + ), > + > + TP_printk("mhi%d.%u type=%u treptr=%llx tredword0=%08x tredword1=%08x", > + __entry->cntrl_index, __entry->channel, __entry->type, > + __entry->treptr, __entry->tredword0, __entry->tredword1) > +); > + > +#endif /* _TRACE_MHI_H */ > + To have this file called "trace.h" in the drivers/bus/mhi/core directory, you would need to also add: #undef TRACE_INCLUDE_PATH #undef TRACE_INCLUDE_FILE #define TRACE_INCLUDE_PATH . #define TRACE_INCLUDE_FILE trace -- Steve > +/* This part must be outside protection */ > +#include <trace/define_trace.h>
diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c index c1eb43d..312e4db 100644 --- a/drivers/bus/mhi/core/main.c +++ b/drivers/bus/mhi/core/main.c @@ -15,6 +15,9 @@ #include <linux/slab.h> #include "internal.h" +#define CREATE_TRACE_POINTS +#include <trace/events/mhi.h> + int __must_check mhi_read_reg(struct mhi_controller *mhi_cntrl, void __iomem *base, u32 offset, u32 *out) { @@ -61,6 +64,8 @@ void mhi_write_reg_field(struct mhi_controller *mhi_cntrl, void __iomem *base, void mhi_write_db(struct mhi_controller *mhi_cntrl, void __iomem *db_addr, dma_addr_t db_val) { + trace_mhi_ring_doorbell(db_addr, db_val, mhi_cntrl); + mhi_write_reg(mhi_cntrl, db_addr, 4, upper_32_bits(db_val)); mhi_write_reg(mhi_cntrl, db_addr, 0, lower_32_bits(db_val)); } @@ -118,6 +123,7 @@ void mhi_ring_chan_db(struct mhi_controller *mhi_cntrl, */ dma_wmb(); *ring->ctxt_wp = db; + trace_mhi_update_ring_wp(ring, mhi_cntrl); mhi_chan->db_cfg.process_db(mhi_cntrl, &mhi_chan->db_cfg, ring->db_addr, db); @@ -724,6 +730,8 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl, while (dev_rp != local_rp) { enum mhi_pkt_type type = MHI_TRE_GET_EV_TYPE(local_rp); + trace_mhi_event(local_rp, mhi_cntrl); + switch (type) { case MHI_PKT_TYPE_BW_REQ_EVENT: { @@ -872,6 +880,8 @@ int mhi_process_data_event_ring(struct mhi_controller *mhi_cntrl, WARN_ON(chan >= mhi_cntrl->max_chan); + trace_mhi_event(local_rp, mhi_cntrl); + /* * Only process the event ring elements whose channel * ID is within the maximum supported range. @@ -1098,6 +1108,8 @@ int mhi_gen_tre(struct mhi_controller *mhi_cntrl, struct mhi_chan *mhi_chan, mhi_add_ring_element(mhi_cntrl, tre_ring); mhi_add_ring_element(mhi_cntrl, buf_ring); + trace_mhi_transfer(mhi_tre, mhi_cntrl, mhi_chan->chan); + return 0; } diff --git a/include/trace/events/mhi.h b/include/trace/events/mhi.h new file mode 100644 index 0000000..903fdd4 --- /dev/null +++ b/include/trace/events/mhi.h @@ -0,0 +1,121 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM mhi + +#if !defined(_TRACE_MHI_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_MHI_H + +#include <linux/mhi.h> +#include <linux/tracepoint.h> + +#include "../../drivers/bus/mhi/core/internal.h" + +TRACE_EVENT(mhi_transfer, + + TP_PROTO(struct mhi_tre *tre, struct mhi_controller *cntrl, u32 chan), + + TP_ARGS(tre, cntrl, chan), + + TP_STRUCT__entry( + __field(int, cntrl_index) + __field(u32, channel) + __field(void *, treaddr) + __field(u64, treptr) + __field(u32, tredword0) + __field(u32, tredword1) + ), + + TP_fast_assign( + __entry->cntrl_index = cntrl->index; + __entry->channel = chan; + __entry->treaddr = tre; + __entry->treptr = tre->ptr; + __entry->tredword0 = tre->dword[0]; + __entry->tredword1 = tre->dword[1]; + ), + + TP_printk("mhi%d.%u treaddr=%p treptr=%llx tredword0=%08x tredword1=%08x", + __entry->cntrl_index, __entry->channel, __entry->treaddr, + __entry->treptr, __entry->tredword0, __entry->tredword1) +); + +TRACE_EVENT(mhi_update_ring_wp, + + TP_PROTO(struct mhi_ring *ring, struct mhi_controller *cntrl), + + TP_ARGS(ring, cntrl), + + TP_STRUCT__entry( + __field(int, cntrl_index) + __field(void *, ring) + __field(void *, wp_host) + __field(u64, wp_device) + ), + + TP_fast_assign( + __entry->cntrl_index = cntrl->index; + __entry->ring = ring; + __entry->wp_host = ring->wp; + __entry->wp_device = *ring->ctxt_wp; + ), + + TP_printk("mhi%d ringaddr=%p wp_host=%p wp_device=%llx", + __entry->cntrl_index, __entry->ring, __entry->wp_host, + __entry->wp_device) +); + +TRACE_EVENT(mhi_ring_doorbell, + + TP_PROTO(void __iomem *db_addr, dma_addr_t db_val, struct mhi_controller *cntrl), + + TP_ARGS(db_addr, db_val, cntrl), + + TP_STRUCT__entry( + __field(int, cntrl_index) + __field(void *, dbaddr) + __field(dma_addr_t, dbval) + ), + + TP_fast_assign( + __entry->cntrl_index = cntrl->index; + __entry->dbaddr = db_addr; + __entry->dbval = db_val; + ), + + TP_printk("mhi%d dbaddr=%p dbval=%llx", __entry->cntrl_index, + __entry->dbaddr, __entry->dbval) +); + +TRACE_EVENT(mhi_event, + + TP_PROTO(struct mhi_tre *tre, struct mhi_controller *cntrl), + + TP_ARGS(tre, cntrl), + + TP_STRUCT__entry( + __field(int, cntrl_index) + __field(u32, channel) + __field(unsigned int, type) + __field(u64, treptr) + __field(u32, tredword0) + __field(u32, tredword1) + ), + + TP_fast_assign( + __entry->cntrl_index = cntrl->index; + __entry->channel = MHI_TRE_GET_EV_CHID(tre); + __entry->type = MHI_TRE_GET_EV_TYPE(tre); + __entry->treptr = tre->ptr; + __entry->tredword0 = tre->dword[0]; + __entry->tredword1 = tre->dword[1]; + ), + + TP_printk("mhi%d.%u type=%u treptr=%llx tredword0=%08x tredword1=%08x", + __entry->cntrl_index, __entry->channel, __entry->type, + __entry->treptr, __entry->tredword0, __entry->tredword1) +); + +#endif /* _TRACE_MHI_H */ + +/* This part must be outside protection */ +#include <trace/define_trace.h>
Add a set of tracepoints for reporting MHI events such as MHI transfers, events, doorbell, etc... This can be used for debugging purpose. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> --- drivers/bus/mhi/core/main.c | 12 +++++ include/trace/events/mhi.h | 121 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 133 insertions(+) create mode 100644 include/trace/events/mhi.h -- 2.7.4