diff mbox series

[v2,1/2] dt-bindings: misc: qcom,qca6390: add binding for QCA6390 device

Message ID 20210113160053.3974229-2-dmitry.baryshkov@linaro.org
State New
Headers show
Series Add support for Qualcomm QCA639x chips family | expand

Commit Message

Dmitry Baryshkov Jan. 13, 2021, 4 p.m. UTC 
Qualcomm QCA6390/1 is a family of WiFi + Bluetooth SoCs, with BT part
being controlled through the UART and WiFi being present on PCIe bus.
Both blocks share common power sources. Add binding to describe power
sequencing required to power up this device.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

---
 .../bindings/misc/qcom,qca6390.yaml           | 84 +++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/qcom,qca6390.yaml

-- 
2.29.2

Comments

Rob Herring Jan. 14, 2021, 3:41 a.m. UTC | #1 
On Wed, 13 Jan 2021 19:00:52 +0300, Dmitry Baryshkov wrote:
> Qualcomm QCA6390/1 is a family of WiFi + Bluetooth SoCs, with BT part

> being controlled through the UART and WiFi being present on PCIe bus.

> Both blocks share common power sources. Add binding to describe power

> sequencing required to power up this device.

> 

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---

>  .../bindings/misc/qcom,qca6390.yaml           | 84 +++++++++++++++++++

>  1 file changed, 84 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/misc/qcom,qca6390.yaml

> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/misc/qcom,qca6390.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/misc/qcom,qca6390.yaml#

See https://patchwork.ozlabs.org/patch/1425839

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/misc/qcom,qca6390.yaml b/Documentation/devicetree/bindings/misc/qcom,qca6390.yaml
new file mode 100644
index 000000000000..bb507eb6e0a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qcom,qca6390.yaml
@@ -0,0 +1,84 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mfd/qcom,qca6390.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm QCA6390 WiFi + Bluetoot SoC bindings
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes thes Qualcomm QCA6390 or QCA6391 power supplies and
+  enablement pins.
+
+properties:
+  compatible:
+    const: qcom,qca6390
+
+  '#power-domain-cells':
+    const: 0
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: active
+
+  vddaon-supply:
+    description:
+      0.95V always-on LDO power input
+
+  vddpmu-supply:
+    description:
+      0.95V LDO power input to PMU
+
+  vddrfa1-supply:
+    description:
+      0.95V LDO power input to RFA
+
+  vddrfa2-supply:
+    description:
+      1.25V LDO power input to RFA
+
+  vddrfa3-supply:
+    description:
+      2V LDO power input to RFA
+
+  vddpcie1-supply:
+    description:
+      1.25V LDO power input to PCIe part
+
+  vddpcie2-supply:
+    description:
+      2V LDO power input to PCIe part
+
+  vddio-supply:
+    description:
+      1.8V VIO input
+
+additionalProperties: false
+
+examples:
+  - |
+    qca6390: qca6390 {
+      compatible = "qcom,qca6390";
+      #power-domain-cells = <0>;
+
+      vddaon-supply = <&vreg_s6a_0p95>;
+      vddpmu-supply = <&vreg_s2f_0p95>;
+      vddrfa1-supply = <&vreg_s2f_0p95>;
+      vddrfa2-supply = <&vreg_s8c_1p3>;
+      vddrfa3-supply = <&vreg_s5a_1p9>;
+      vddpcie1-supply = <&vreg_s8c_1p3>;
+      vddpcie2-supply = <&vreg_s5a_1p9>;
+      vddio-supply = <&vreg_s4a_1p8>;
+      pinctrl-names = "default", "active";
+      pinctrl-0 = <&wlan_default_state &bt_default_state>;
+      pinctrl-1 = <&wlan_active_state &bt_active_state>;
+    };
+...