@@ -122,7 +122,10 @@ static inline unsigned long dma_max_pfn(struct device *dev)
#define dma_max_pfn(dev) dma_max_pfn(dev)
static inline void arch_setup_dma_ops(struct device *dev, u64 mask,
- unsigned long offset, bool coherent)
+ u64 dma_base, u64 size,
+ unsigned long offset,
+ struct iommu_dma_mapping *iommu,
+ bool coherent)
{
dev->coherent_dma_mask = mask;
dev->dma_mask = &dev->coherent_dma_mask;
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/of_iommu.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
@@ -162,25 +163,37 @@ EXPORT_SYMBOL(of_device_alloc);
*/
static void of_dma_configure(struct platform_device *pdev)
{
- u64 dma_addr, paddr, size;
+ u64 dma_addr, paddr, size, mask;
int ret;
bool coherent;
unsigned long offset;
+ struct iommu_dma_mapping *iommu;
struct device *dev = &pdev->dev;
+ /*
+ * Set default dma-mask to 32 bit. Drivers are expected to setup
+ * the correct supported dma_mask.
+ */
+ mask = DMA_BIT_MASK(32);
+
ret = of_dma_get_range(dev->of_node, &dma_addr, &paddr, &size);
- offset = ret < 0 ? 0 : PFN_DOWN(paddr - dma_addr);
- dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", dev->dma_pfn_offset);
+ if (ret < 0) {
+ dma_addr = offset = 0;
+ size = mask;
+ } else {
+ offset = PFN_DOWN(paddr - dma_addr);
+ dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", dev->dma_pfn_offset);
+ }
coherent = of_dma_is_coherent(dev->of_node);
dev_dbg(dev, "device is%sdma coherent\n",
coherent ? " " : " not ");
- /*
- * Set default dma-mask to 32 bit. Drivers are expected to setup
- * the correct supported dma_mask.
- */
- arch_setup_dma_ops(dev, DMA_BIT_MASK(32), offset, coherent);
+ iommu = of_iommu_configure(dev);
+ dev_dbg(dev, "device is%sbehind an iommu\n",
+ iommu ? " " : " not ");
+
+ arch_setup_dma_ops(dev, mask, dma_addr, size, offset, iommu, coherent);
}
/**
@@ -209,14 +222,9 @@ static struct platform_device *of_platform_device_create_pdata(
if (!dev)
goto err_clear_flag;
- of_dma_configure(dev);
dev->dev.bus = &platform_bus_type;
dev->dev.platform_data = platform_data;
-
- /* We do not fill the DMA ops for platform devices by default.
- * This is currently the responsibility of the platform code
- * to do such, possibly using a device notifier
- */
+ of_dma_configure(dev);
if (of_device_add(dev) != 0) {
platform_device_put(dev);
@@ -138,7 +138,10 @@ extern u64 dma_get_required_mask(struct device *dev);
#ifndef arch_setup_dma_ops
static inline void arch_setup_dma_ops(struct device *dev, u64 mask,
- unsigned long offset, bool coherent) { }
+ u64 dma_base, u64 size,
+ unsigned long offset,
+ struct iommu_dma_mapping *iommu,
+ bool coherent) { }
#endif
static inline unsigned int dma_get_max_seg_size(struct device *dev)
This patch extends of_dma_configure so that it sets up the IOMMU for a device, as well as the coherent/non-coherent DMA mapping ops. Signed-off-by: Will Deacon <will.deacon@arm.com> --- arch/arm/include/asm/dma-mapping.h | 5 ++++- drivers/of/platform.c | 36 ++++++++++++++++++++++-------------- include/linux/dma-mapping.h | 5 ++++- 3 files changed, 30 insertions(+), 16 deletions(-)