@@ -557,6 +557,7 @@ static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
unsigned int addr;
int i, reg;
+ pm_runtime_get_sync(bus->parent);
spin_lock_irqsave(&pdata->mac_lock, flags);
/* Confirm MII not busy */
@@ -582,6 +583,7 @@ static int smsc911x_mii_read(struct mii_bus *bus, int phyaddr, int regidx)
out:
spin_unlock_irqrestore(&pdata->mac_lock, flags);
+ pm_runtime_put(bus->parent);
return reg;
}
@@ -594,6 +596,7 @@ static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
unsigned int addr;
int i, reg;
+ pm_runtime_get_sync(bus->parent);
spin_lock_irqsave(&pdata->mac_lock, flags);
/* Confirm MII not busy */
@@ -623,6 +626,7 @@ static int smsc911x_mii_write(struct mii_bus *bus, int phyaddr, int regidx,
out:
spin_unlock_irqrestore(&pdata->mac_lock, flags);
+ pm_runtime_put(bus->parent);
return reg;
}
@@ -1589,6 +1593,8 @@ static int smsc911x_open(struct net_device *dev)
int retval;
int irq_flags;
+ pm_runtime_get_sync(dev->dev.parent);
+
/* find and start the given phy */
if (!dev->phydev) {
retval = smsc911x_mii_probe(dev);
@@ -1735,6 +1741,7 @@ static int smsc911x_open(struct net_device *dev)
phy_disconnect(dev->phydev);
dev->phydev = NULL;
out:
+ pm_runtime_put(dev->dev.parent);
return retval;
}
@@ -1766,6 +1773,7 @@ static int smsc911x_stop(struct net_device *dev)
dev->phydev = NULL;
}
netif_carrier_off(dev);
+ pm_runtime_put(dev->dev.parent);
SMSC_TRACE(pdata, ifdown, "Interface stopped");
return 0;
@@ -2334,7 +2342,6 @@ static int smsc911x_drv_remove(struct platform_device *pdev)
free_netdev(dev);
- pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
@@ -2540,6 +2547,7 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
}
spin_unlock_irq(&pdata->mac_lock);
+ pm_runtime_put(&pdev->dev);
netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
Currently the smsc911x driver has mininal power management: during driver probe, the device is powered up, and during driver remove, it is powered down. Improve power management by making it more fine-grained: 1. Power the device down when driver probe is finished, 2. Power the device (down) when it is opened (closed), 3. Make sure the device is powered during PHY access. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Tested on r8a73a4/ape6evm, where the LAN9220 is connected to a power-managed bus, and any attempt to access a device register while the device is suspended will trigger an asynchronous external abort. --- drivers/net/ethernet/smsc/smsc911x.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)